Introduction
The PROZOR 4-Way Bi-Directional RCA Stereo Audio Switch is designed to manage multiple L/R stereo audio sources and outputs. This passive device allows for flexible audio routing without requiring external power or software, making it a convenient solution for integrating various audio components into your system.

Image: The PROZOR RCA Audio Switch integrated into a desktop audio setup, connected to a laptop and other devices.
Safety Information
Please read and understand the following safety guidelines before using the device:
- Keep the device away from water, moisture, and extreme temperatures.
- Do not attempt to open or modify the device. There are no user-serviceable parts inside.
- Use only appropriate RCA cables for connection.
- Place the device on a stable, flat surface to prevent accidental falls.
Package Contents
Please check the package for the following items:
- 1 x PROZOR L/R Stereo Audio Bi-Directional Switcher
- 1 x L/R Stereo RCA Cable (1.5m)
- 1 x User Manual

Image: The contents of the product package, including the audio switcher, an RCA stereo cable, and the user manual.
Product Overview
Features
- Passive Operation: No external power supply or software required.
- Plug and Play: Simple to set up and use.
- Compact Design: Space-saving and suitable for desktop environments.
- High Fidelity: Supports analog signals up to 1.2V p-p I/O with an input/output frequency range of 20Hz~20KHz.
- Durable Construction: Features a sturdy, all-metal casing.
Controls and Ports
The device features multiple RCA jacks and a selector knob for managing audio connections.
- RCA Jacks: 5 sets of L/R RCA jacks, labeled as "IN/OUT" and "OUT/IN 1/2/3/4". These are used for connecting your audio sources and output devices.
- Selector Knob: A single knob on the front panel, labeled "1/2/3/4", allows you to switch between the connected audio channels.

Image: Detailed view of the PROZOR RCA Audio Switch, highlighting the selector knob on the front and the labeled IN/OUT and OUT/IN 1/2/3/4 RCA ports on the back.
Setup and Installation
General Connection
- Identify your audio sources (e.g., DVD player, laptop, digital player, smartphone) and audio output devices (e.g., active speakers, amplifier, tube amp, headphone amp).
- Use RCA cables to connect your devices to the RCA jacks on the switch. Ensure left (white) and right (red) channels are matched.
- Ensure all connections are secure.
Operating Modes
The switch supports bi-directional operation, allowing for various configurations:
- 4 Inputs to 1 Output (4x1 / 1x4): Connect up to four audio sources to the "OUT/IN 1/2/3/4" ports and one audio output device to the "IN/OUT" port. Use the selector knob to choose which of the four sources is routed to the single output.

Image: Connection diagram illustrating how to connect four input devices (Digital Player, Laptop, Smart Phone, DVD) to the switch and route the selected input to one output device (Active Speakers or AMP).
- 1 Input to 4 Outputs (1x4 / 4x1): Connect one audio source to the "IN/OUT" port and up to four audio output devices to the "OUT/IN 1/2/3/4" ports. Use the selector knob to select which of the four output devices receives the audio signal.

Image: Connection diagram illustrating how to connect one input device (DVD or Laptop) to the switch and route the signal to one of four output devices (Active Speakers, AMP, TUBE AMP, or Headphone AMP).
- 4 Inputs to 2 Outputs (4x2 / 2x4): Connect four audio sources to the "OUT/IN 1/2/3/4" ports. Connect two audio output devices to the "IN/OUT" ports. Use the selector knob to select which of the four sources is routed to the two outputs.
- 2 Inputs to 4 Outputs (2x4 / 4x2): Connect two audio sources to the "IN/OUT" ports. Connect four audio output devices to the "OUT/IN 1/2/3/4" ports. Use the selector knob to select which of the two sources is routed to the four outputs.
Important Note: Only one input can be selected for playback at any given time. The product does not support simultaneous output to multiple devices from different inputs.
Operating Instructions
- Once all devices are connected according to your desired configuration, turn on your audio source(s) and audio output device(s).
- Rotate the selector knob on the front of the switch to choose the desired input source or output destination. The selected channel will be active.
- Adjust the volume on your audio output device (e.g., amplifier, speakers) as needed.
Troubleshooting
- No Sound:
- Check all RCA cable connections to ensure they are secure and correctly plugged into the L/R jacks.
- Verify that the selector knob on the switch is set to the correct input/output channel.
- Ensure your audio source device is playing and its volume is turned up.
- Ensure your audio output device (speakers, amplifier) is powered on and its volume is adjusted.
- Test with different RCA cables if possible to rule out faulty cabling.
- Distorted Sound:
- Check for any loose connections in your audio chain.
- Ensure the audio levels from your source are not too high, which can cause clipping or distortion.
- Test with different cables or devices to isolate the source of the distortion.
- No Video Signal:
- This device is designed exclusively for L/R stereo audio signals and does not support video signals. If you require video switching, a dedicated video switch is necessary.
Specifications
| Feature | Specification |
|---|---|
| Model | L/R Stereo Audio Bi-Directional Switcher |
| Interfaces | 5 x L/R RCA Jacks |
| Controls | 1 x Selector Knob |
| Dimensions (L x W x H) | 108 mm x 92 mm x 41 mm (4.25 in x 3.62 in x 1.61 in) |
| Analog Signal Support | Max 1.2V p-p I/O |
| Frequency Range | 20Hz ~ 20KHz |
| Shielding | Non-Shielded |
| Application | Television, Computer, Multimedia audio systems |
| Certification | CE |
| Power Requirement | Passive device, no external power supply needed |
| Construction | All metal casing |

Image: Diagram showing the dimensions of the PROZOR RCA Audio Switch: 108mm (length), 92mm (width), and 41mm (height).
Maintenance
- Keep the device in a dry, dust-free environment to ensure optimal performance and longevity.
- Clean the exterior of the switch with a soft, dry cloth. Avoid using liquid cleaners, abrasive materials, or solvents, as these can damage the finish or internal components.
- Periodically check RCA connections to ensure they are clean and free of debris for optimal signal transfer.
User Tips
- Audio Only: This switch is designed for L/R stereo audio signals exclusively. It will not pass video signals. If you need to switch video, a dedicated video switcher is necessary.
- Cable Quality: Using high-quality RCA cables can help maintain audio signal integrity and minimize interference, especially over longer distances.
- Placement: Its compact size makes it ideal for placement on a desktop or near your audio equipment. Ensure it is easily accessible for switching channels.
Warranty and Support
For warranty information or technical support regarding your PROZOR 4-Way Bi-Directional RCA Stereo Audio Switch, please contact the manufacturer or your point of purchase. It is recommended to keep your purchase receipt as proof of purchase for any warranty claims.
