1. Introduction
Thank you for choosing the UGREEN LP142 Tablet Phone Stand. This long arm aluminum adjustable holder is designed to provide a stable and versatile solution for hands-free viewing of your devices. It is compatible with a wide range of phones and tablets, offering multi-angle adjustment for various scenarios such as streaming, learning, gaming, and following recipes. Please read this manual carefully before use to ensure proper installation and operation.
2. Safety Information
- Ensure the base clamp is securely fastened to a stable surface before attaching your device.
- Do not exceed the maximum load capacity of 2.2 KG (4.85 lbs) to prevent damage or instability.
- Avoid placing the stand in areas where it could be easily knocked over.
- Keep the stand away from children to prevent accidental injury.
- Do not attempt to disassemble or modify the product, as this may void the warranty and cause damage.
3. Package Contents
The UGREEN LP142 Tablet Phone Stand package typically includes:
- 1 x UGREEN LP142 Long Arm Tablet/Phone Stand
- 1 x Base Clip
- 1 x Device Holder
- Ugreen retail box
4. Setup Instructions
Follow these steps to install your UGREEN LP142 Tablet Phone Stand:
- Install the Base Clip: Attach the base clip to a sturdy surface such as a desk or bedside table. Rotate the knob to tighten the clip securely. Ensure the surface is clean and dry for optimal grip.
- Insert the Stand: Insert the main arm of the stand into the opening of the base clip. Ensure it is fully seated and stable.
- Install Your Device: Gently pull apart the device holder to expand it, then carefully place your phone or tablet into the holder. The holder features anti-scratch rubber pads to protect your device.
- Adjust the Stand Angle: Once your device is secured, adjust the long arm and the device holder to your desired viewing angle and position. The stand offers multi-angle adjustment points for flexibility.
Image: Installation steps for the UGREEN LP142 stand, showing the base clip attachment.
5. Operating Instructions
The UGREEN LP142 stand is designed for ease of use and maximum flexibility:
- Device Compatibility: The holder is compatible with devices ranging from 4 to 12.9 inches.
- Multi-Angle Adjustment: The stand features multiple pivot points (135°, 180°, 220°, 360° rotation) allowing you to position your device vertically or horizontally and at various heights and distances.
- Strong Grip and Stability: The upgraded clip and sturdy base with anti-slip bottom pads ensure a strong grip, anti-vibration, and anti-shake performance, supporting devices up to 2.2 KG.
- Reserved Charging Port: The thoughtful design includes a reserved charging port area, allowing you to charge your device while it's mounted without obstructing the cable.
Image: Multi-angle adjustment capabilities of the stand, illustrating various rotation points and viewing orientations.
Image: Demonstrates the strong grip and anti-vibration features, comparing the upgraded stable base with a previous, less stable design.
Image: Illustrates the reserved charging port, allowing convenient device charging while mounted.
6. Maintenance
- Cleaning: Wipe the stand with a soft, damp cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners.
- Inspection: Periodically check all knobs and joints to ensure they are tight and secure. Re-tighten if necessary to maintain stability.
- Storage: When not in use, you can fold the stand for compact storage.
7. Troubleshooting
- Q: The stand feels unstable or shakes.
- A: Ensure the base clip is tightened firmly to the surface. Verify that your device's weight does not exceed the maximum load capacity of 2.2 KG. Check that all adjustment knobs are securely fastened.
- Q: My device does not fit into the holder.
- A: The stand is designed for devices between 4 and 12.9 inches. Please check your device's dimensions. For example, a 13-inch iPad may be too large for this holder.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | UGREEN |
| Model | LP142 |
| Name | Tablet Long Arm Stand |
| Material | Aluminum alloy + ABS + Silicone |
| Compatibility | 4-12.9 inch Devices |
| Max Load | 2.2 KG (4.85 lbs) |
| Product Weight | 920g (2.03 lbs) |
| Arm Length | 350mm (13.8 inches) |
| Clamp Width | 130mm (5.1 inches) |
| Base Height | 150mm (5.9 inches) |
| Packing Size | 160 x 427 x 87mm |
Image: Detailed product specifications and a diagram illustrating key dimensions.
9. User Tips
- For optimal stability, ensure the clamp is attached to a flat, sturdy surface with sufficient thickness for a firm grip.
- When adjusting the arm, support your device to prevent it from dropping or swinging unexpectedly.
- Utilize the reserved charging port to keep your device powered during long viewing sessions, especially when gaming or streaming.
- The stand's wide compatibility (4-12.9 inches) makes it suitable for various devices, including phones, tablets, Nintendo Switch, and Kindle.
10. Warranty & Support
- Warranty: This product comes with a 1-year warranty from the UGREEN Official Store.
- Returns: Enjoy 7 days to return if any quality problems are encountered.
- Customer Support: For any inquiries or assistance, please contact UGREEN customer service. All emails are typically answered within 24 hours.
