Jonsbo CR-1200

Contents

Jonsbo CR1200 CPU Cooler Instruction Manual

Model: CR-1200

1. Product Overview

The Jonsbo CR1200 is a two-heat pipe single-tower CPU radiator designed to balance performance and cost-effectiveness. It features a long-life fan with removable blades for easy cleaning and maintenance. The cooler incorporates colorful RGB lighting effects on both the fan and a top-mounted nameplate, enhancing the aesthetic appeal of your PC build.

Jonsbo CR1200 CPU Cooler with RGB fan
Figure 1: Jonsbo CR1200 CPU Cooler with RGB fan and 2 heat pipes.

Key features include:

  • Heat Pipe Direct Contact Process: Two pure copper vacuum heat pipes are in direct contact with the CPU, ensuring efficient heat transfer to the fins.
  • FIN Process: The heat pipes and fins are closely connected to conduct heat smoothly. The fin bending process optimizes ventilation space and heat conduction.
  • 9cm Color Luminous Fan: Features soft-light fan blades with colorful lighting effects. The blades are removable for convenient cleaning.
  • Top Lighting Decoration: Four high-bright colored lamp beads illuminate an exclusive nameplate pattern on the top, adding to the cooler's visual integrity.
Jonsbo CR1200 Product Overview with key features
Figure 2: Product overview highlighting heat pipe direct contact, 9cm removable fan, top glow nameplate, and easy installation.

2. Specifications

FeatureSpecification
Model NumberCR-1200
Cooler TypeTower
Product Size (L x W x H)93mm x 67mm x 128mm
Heatpipes2 (Φ6mm)
Supported CPU SocketsIntel: LGA 1150, LGA 1151, LGA 1155, LGA 1156, LGA1200, LGA 1700, LGA2011
AMD: AM4
TDP95W
Fan Speed200 - 2300rpm (±10%)
Power Interface3PIN
Fan Life100,000 hrs
CertificationCE
Blade Quantity7
Bearing TypeBall Bearing
Noise Level30.5 dBA (MAX)
Fan Size92mm x 92mm x 25mm
Air Volume36 CFM
Input Voltage12V
Product Weight310g
Jonsbo CR1200 Product Parameters Table
Figure 3: Detailed product parameters including dimensions, fan specifications, and noise level.

3. Installation Guide

The Jonsbo CR1200 CPU Cooler is designed for easy installation on various Intel and AMD platforms. Please follow these steps carefully.

3.1 Package Contents

Before starting, ensure all components are present:

  • Jonsbo CR1200 CPU Cooler (Heatsink with pre-attached fan)
  • Mounting bracket (for Intel LGA 115X/1200/1700 or AMD AM4)
  • Mounting screws/pins
  • Thermal paste
Jonsbo CR1200 mounting hardware for Intel and AMD
Figure 4: Included mounting buckle, pins, and thermal paste for installation.

3.2 Pre-Installation Steps

  1. Power off your computer and disconnect all cables.
  2. Open your computer case and locate the CPU socket on the motherboard.
  3. Remove any existing CPU cooler. Clean the CPU surface thoroughly to remove old thermal paste using isopropyl alcohol.
  4. Apply a small amount of thermal paste (included) to the center of the CPU's integrated heat spreader (IHS).

3.3 Installing the Cooler

The cooler uses an easy-to-install buckle system. The specific steps may vary slightly depending on your CPU socket type (Intel or AMD).

  1. For Intel LGA 115X/1200/1700/2011:
    • Place the appropriate Intel backplate (if provided and necessary for your motherboard) behind the motherboard, aligning the holes with the CPU socket.
    • Position the mounting bracket on the front side of the motherboard, around the CPU socket, aligning it with the backplate holes.
    • Secure the bracket using the provided screws/pins.
  2. For AMD AM4:
    • The cooler typically uses the existing AM4 backplate. Remove the plastic retention clips from the motherboard, but keep the metal backplate.
    • Attach the AMD mounting clips to the cooler base, if not already pre-attached.
  3. Carefully align the cooler with the mounting points on the bracket/socket.
  4. Press down firmly and evenly to engage the buckle mechanism. Ensure the cooler is securely fastened and makes good contact with the CPU.
  5. Connect the 3-PIN fan power cable to the CPU_FAN header on your motherboard.
Jonsbo CR1200 CPU Cooler installed on a motherboard
Figure 5: The CR1200 cooler installed on a motherboard, showing its compact design.
Close-up of heat pipe direct contact with CPU
Figure 6: Illustration of the heat pipe direct contact process for efficient heat transfer.

For a visual guide, please refer to the product video below:

Video 1: Product showcase and installation overview of the Jonsbo CR1200 CPU Cooler.

4. Operation

Once installed and connected, the Jonsbo CR1200 CPU Cooler will begin operating automatically when your computer is powered on.

  • Fan Operation: The 9cm fan will spin between 200 and 2300 RPM, adjusting its speed based on CPU temperature to maintain optimal cooling.
  • RGB Lighting: The cooler features colorful RGB lighting effects on the fan and the top nameplate. These lights typically cycle through various colors automatically, providing an aesthetic enhancement to your PC build. The lighting is controlled by an automatic color-changing chip.
9cm color luminous fan with soft-light blades
Figure 7: The 9cm fan with colorful luminous effects.
Top lighting decoration with illuminated nameplate
Figure 8: The top of the cooler featuring the illuminated Jonsbo nameplate.

5. Maintenance

Regular maintenance helps ensure optimal performance and longevity of your CPU cooler.

  • Dust Removal: Periodically check the heatsink fins and fan blades for dust accumulation. Dust can impede airflow and reduce cooling efficiency.
  • Fan Cleaning: The fan blades are designed to be removable for easy cleaning. Gently detach the fan from the heatsink (if applicable, refer to the installation video for guidance on fan clips) and clean the blades with a soft brush or compressed air. Ensure the fan is dry before reattaching.
  • Heatsink Cleaning: Use compressed air to blow dust out of the heatsink fins. Avoid bending the fins.
  • Thermal Paste: Thermal paste typically lasts for several years. If you notice a significant increase in CPU temperatures, consider reapplying fresh thermal paste after cleaning the CPU and cooler base.

6. Troubleshooting

If you encounter issues with your Jonsbo CR1200 CPU Cooler, refer to the following common problems and solutions:

  • Cooler Not Fitting:
    • Ensure you are using the correct mounting bracket and hardware for your specific CPU socket (Intel LGA 115X/1200/1700/2011 or AMD AM4).
    • Double-check that all plastic screws or locks are correctly aligned and fully engaged. Some users have reported issues with plastic components not fitting perfectly; ensure gentle but firm pressure.
  • Fan Not Spinning or RGB Not Lighting Up:
    • Verify that the 3-PIN fan power cable is securely connected to the CPU_FAN header on your motherboard.
    • Check your motherboard's BIOS/UEFI settings to ensure the CPU fan header is enabled and configured correctly.
  • High CPU Temperatures:
    • Ensure the cooler is properly seated on the CPU and making full contact. Re-installation with fresh thermal paste may be necessary.
    • Check for excessive dust buildup on the heatsink and fan. Clean as described in the Maintenance section.
    • Verify that the fan is spinning at an appropriate speed. If using a 3-PIN connector, fan speed control might be limited to voltage regulation by the motherboard.
    • Confirm your CPU's TDP (Thermal Design Power) does not exceed the cooler's rated 95W capacity.
  • Excessive Noise:
    • Ensure the fan is securely attached and not vibrating against other components.
    • Check for any cables or obstructions interfering with the fan blades.
    • While the cooler is generally quiet (max 30.5 dBA), high fan speeds under heavy load will naturally produce more noise.

7. User Tips

Based on feedback from other users, here are some helpful tips for using your Jonsbo CR1200 CPU Cooler:

  • Thermal Performance: Many users report excellent cooling performance, even for higher-end CPUs like Xeon E5 2667 v4 and Intel i7 6700, with temperatures significantly lower than stock coolers. It's noted as "small but efficient" for CPUs like the i3 13th generation.
  • Quiet Operation: The cooler is generally considered quiet, even with its 3-PIN connector.
  • Included Thermal Paste: The package typically includes thermal paste, so you won't need to purchase it separately for initial installation.
  • RGB Aesthetics: Users appreciate the vibrant RGB lighting effects, noting that they look good and add style to the PC build. The RGB is automatic and cycles through colors.
  • Installation Check: While generally easy to install, double-check the fit of the mounting hardware, especially the plastic screws/locks, to ensure they properly engage with your motherboard's bracket.

8. Warranty and Support

For warranty information and technical support, please refer to the official Jonsbo website or contact your retailer. Keep your proof of purchase for any warranty claims.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.