Usongshine MKS OSC

Contents

MKS OSC PWM Pulse Signal Generator Module User Manual

Model: MKS OSC

1. Warnings & Safety Information

Please read all safety information carefully before operating the MKS OSC module.

Fire and Burn Hazard

  • High temperatures generated during processing may ignite the workpiece, smoke, or surrounding materials.
  • The processing area must be kept clear of flammable substances and equipped with fire extinguishing equipment.
  • After processing, the workpiece and machine components (e.g., spindle, laser head) may remain hot for an extended period; verify full cooling before handling.

Mechanical Injury Hazard

  • High-speed rotating spindles, moving gantries, belts, and lead screws pose serious risks of crushing, cutting, or entanglement injuries.
  • Before performing any installation, commissioning, cleaning, or maintenance operation, disconnect the machine from the main power supply.

Electrical Hazard

  • High-voltage circuits are present internally. Unauthorized personnel must not open the electrical control cabinet.
  • All electrical connections must comply with local regulations and be performed by qualified electricians.

Hazardous Substances and Fumes

  • Processing certain materials (e.g., plastics, composites, coated metals) may generate toxic, carcinogenic, or irritating fumes and dust.
  • Use only in environments equipped with an effective Local Exhaust Ventilation (LEV) system.

Usage Restrictions

  • This accessory is not designed for industrial continuous-duty operation.
  • Observe the maximum duty cycle specified in the equipment manual.
  • Do not use this accessory for any purpose other than its intended design application.

2. Product Overview

The MKS OSC is a pulse generation module designed to supply control signals to stepper motor drivers. It simplifies the control platform for stepper motors when combined with a motor driver, a stepper motor, and a DC power supply.

This module is compatible with Nema17/23 stepper motor drivers and can be used with various engraving machine accessories, including those from TWOTREES-branded machines.

Front view of the MKS OSC module with labels for power, control signals, and adjustment knobs.
Front view of the MKS OSC module, showing power input, control signal terminals, speed potentiometer, and direction/on-off switches.

3. Features

  • Generates pulse signals for stepper motor drivers.
  • Can also produce PWM signals, selectable via jumper.
  • Three selectable frequency ranges via jumper:
    • High: 5.4 kHz - 160 kHz
    • Middle: 540 Hz - 16.6 kHz
    • Low: 80 Hz - 2.4 kHz
  • Simple control platform when combined with a stepper motor driver, stepper motor, and DC power supply.
  • Equipped with an ON/OFF switch, direction switch, and speed adjustment potentiometer.
Back view of the MKS OSC module, showing frequency and PWM selection jumpers.
Back view of the MKS OSC module, highlighting the jumpers for frequency and signal type selection.

4. Specifications

ParameterValue
Model NumberMKS OSC
Brand NameUsongshine
Motor TypeStepper Motor
Power SupplyDC
Voltage8V-24V
Frequency RangeHigh: 5.4k-160khz, Middle: 540-16.6khz, Low: 80-2.4khz
Signal TypePWM / Pulse (selectable)
Direction ControlClockwise / Anticlockwise
Operating Temperature0°C to 40°C
Storage Temperature-10°C to 50°C
Ingress Protection RatingIP20 (dust-protected, no water protection)
Dimensions (approx.)58.0 mm x 38.6 mm (mounting holes 4.0 mm diameter)
Package Weight (approx.)0.03 kg
Dimensional drawing of the MKS OSC module showing length 58.0mm, width 38.6mm, and 4.0mm diameter mounting holes.
Approximate dimensions of the MKS OSC module.

5. Setup & Wiring

This accessory must be replaced exclusively by personnel trained by the equipment manufacturer or otherwise qualified professionals, strictly following the original manufacturer's "User Manual / Maintenance Manual". Incorrect installation may result in equipment damage, performance degradation, or safety hazards.

General Connection Principle

A basic stepper motor control system consists of the MKS OSC module, a stepper motor driver, a stepper motor, and a DC power supply.

Wiring diagram showing the MKS OSC module connected to a stepper motor driver, which then connects to a stepper motor. Power input is also shown.
Basic wiring diagram for MKS OSC with a stepper motor driver and motor.

Wiring Instructions

Different stepper motor drivers may use different port names, but their functions are generally the same:

  • EN / ENA / FREE: Enable signal
  • PUL / PULS / CLK: Pulse signal
  • DIR / CW / CWW: Direction signal

The MKS OSC module provides terminals for EN, DIR, CLK, and GND. It also has a common terminal for connecting to either common anode or common cathode configurations.

Detailed wiring diagram of the MKS OSC module showing connections for EN, DIR, CLK, GND, and power input (8-24V). It also labels the signal selection and frequency selection jumpers, and the speed and direction controls.
Detailed MKS OSC module layout with labeled terminals and controls.

Common Anode Connection Method (Type B)

  • Connect EN+, PUL+, DIR+ terminals of the stepper driver together to the common anode port (COM+).
  • Connect EN- of the stepper driver to the EN terminal on the MKS OSC.
  • Connect PUL- of the stepper driver to the CLK terminal on the MKS OSC.
  • Connect DIR- of the stepper driver to the DIR terminal on the MKS OSC.

Common Cathode Connection Method (Type A)

  • Connect EN-, PUL-, DIR- terminals of the stepper driver together to the common cathode port (COM-).
  • Connect EN+ of the stepper driver to the EN terminal on the MKS OSC.
  • Connect PUL+ of the stepper driver to the CLK terminal on the MKS OSC.
  • Connect DIR+ of the stepper driver to the DIR terminal on the MKS OSC.

For drivers designed by Makerbase, you can often directly connect to the white card port (common cathode connection).

Wiring diagram showing the MKS OSC module connected to a stepper motor driver and a stepper motor, with power connections. Labels indicate the MKS OSC module (1), stepper motor driver (2), and stepper motor (3).
Example wiring diagram for the MKS OSC module with a stepper motor driver and motor.

Installation of New Component

  1. Refer to the original manufacturer's manual for the equipment you are integrating the MKS OSC with.
  2. Record existing wiring connections and mechanical positioning before removing any old components.
  3. Install the new MKS OSC accessory in reverse order of removal.
  4. Ensure all mechanical connections are securely tightened and all electrical connections are correct, properly polarized, and firmly secured.

6. Operating Procedures

Preparation

  • Confirm compatibility of the accessory model with your existing setup.
  • Ensure the workspace is clean and well-ventilated.

Power Disconnection

  • Shut down the host machine and unplug it from the main power source.
  • Wait until all components—especially the laser source and spindle motor—are fully cooled before handling.

Controls

  • Speed Adjustment: Use the potentiometer knob to adjust the output pulse frequency, thereby controlling the stepper motor speed.
  • Direction Control: Use the 'Clockwise sel' switch to change the rotation direction of the stepper motor.
  • Start/Stop: Use the 'Stop/Open' switch to enable or disable the pulse output.
  • Signal Type Selection: Adjust the jumper (J3) to select between PUL (pulse signal) or PWM (pulse width modulation signal).
  • Frequency Range Selection: Adjust the jumper (J4) to select between High (1-2), Middle (3-4), or Low (5-6) frequency ranges.

Calibration

After installation, recalibrate the relevant systems (e.g., laser power, tool length, engraving area) as specified in the original manufacturer's manual of the main equipment.

Testing

Conduct a low-power/low-speed no-load test under safe conditions to verify smooth operation, absence of abnormal noise, and absence of alarms before resuming normal use.

Official product video demonstrating the MKS OSC module's features and operation.

7. Maintenance

  • Keep the processing area clear of flammable substances.
  • Always disconnect the machine from the main power supply before performing any cleaning or maintenance.
  • Do not use the module in damp, dusty, corrosive-gas, or explosive environments.
  • Regularly inspect connections for tightness and proper polarization.

8. Troubleshooting

If you encounter issues with the MKS OSC module, consider the following common causes:

  • Improper Operation/Maintenance: Ensure the device is operated, maintained, and stored in accordance with this manual and all accompanying safety guidelines.
  • Unauthorized Modifications: Any unauthorized modification of the device, or use of non-OEM or incompatible accessories or software, can lead to malfunctions.
  • Incorrect Usage: Using the device outside its intended purpose, or processing of prohibited or unknown materials, may cause issues.
  • Unauthorized Installation/Repair: Installation, commissioning, or repair performed by personnel not authorized or trained by the manufacturer can lead to damage or improper function.
  • External Damage: Damage caused by force majeure or unforeseen events such as fire, flood, lightning strike, or abnormal voltage.
  • Normal Wear and Tear: Components may experience natural power decay over time.

9. User Tips

  • The MKS OSC board works effectively with drivers like the TB6600. For such drivers, you may need to connect an additional 5 volts to all three positive inputs (EN+, PUL+, DIR+) and control using the negative inputs.
  • The frequency selection jumpers offer good versatility for different motor speed requirements.
  • This module is a handy gadget for testing stepper motors and drivers.

10. Manufacturer Information

For further details or support, please refer to the manufacturer's information below. A user manual in PDF format is also available for download from the product page.

  • Brand: Usongshine
  • Manufacturer Name: Shenzhen Two Trees Technology Co., Ltd.
  • Manufacturer Address: 402, Building 11, No. 9, Qilin Road, Nankeng Community, Sakata Street, Longgang District, Shenzhen City, Guangdong Province, China
  • EU Responsible Person Information:
    • Name: AMZ ECREP SL
    • Address: Calle Gran Via 49, 7 Deb. Spain
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.