ZoeRax WXQ-RJ-C6-YE

Contents

ZoeRax RJ45 CAT6 Crimp Tool User Manual

Model: WXQ-RJ-C6-YE | Brand: ZoeRax

1. Introduction

The ZoeRax RJ45 CAT6 Crimp Tool is an all-in-one solution designed for efficient and reliable termination of network cables. This versatile tool combines cutting, stripping, and crimping functions for various modular connectors, making it an essential device for network professionals and DIY enthusiasts alike. It supports both pass-through and standard RJ45, RJ12, and RJ11 connectors.

ZoeRax RJ45 CAT6 Crimp Tool

Figure 1: ZoeRax RJ45 CAT6 Crimp Tool Overview

2. Safety Information

Please read and understand all safety instructions before using this tool. Failure to follow these instructions may result in injury or damage to the tool.

  • Always wear appropriate personal protective equipment, such as safety glasses, when operating the tool.
  • Keep hands and fingers clear of the cutting and crimping blades during operation.
  • Do not use the tool for purposes other than its intended use (cutting, stripping, and crimping network cables).
  • Store the tool in a dry, safe place, out of reach of children.
  • Ensure the tool is clean and free from debris before and after each use.

3. Product Overview

The ZoeRax RJ45 CAT6 Crimp Tool features a robust design with multiple functionalities integrated for convenience.

Diagram of ZoeRax Crimp Tool parts: Cable Cutter, Cable Stripper, Unlock button, 8P Crimp Nest, 6P Crimp Nest

Figure 2: Key Components of the Crimp Tool

  • Cable Cutter: For STP/UTP paired-conductor data cables.
  • Cable Stripper: For round twisted pair cables.
  • Unlock Button: Push this button out to unlock the tool.
  • 8P Crimp Nest: For RJ45 pass-through/normal plugs.
  • 6P Crimp Nest: For RJ11/RJ12 standard plugs.

4. Setup

Before using the crimp tool, ensure it is in the unlocked position for proper operation.

Diagram showing locked and unlocked states of the crimp tool. Locked: handle pressed down, lock button engaged. Unlocked: handle released, lock button disengaged.

Figure 3: Tool Lock/Unlock Mechanism

  1. Unlocking the Crimper: Lightly press down on the handle and simultaneously push the lock button out to release the tool from its locked, closed position.
  2. Locking the Crimper: To store the tool, press the handle all the way down and engage the lock button to keep it closed.

5. Operating Instructions: How to Make an RJ45 Cable

This section details the process of creating an RJ45 Ethernet cable using the ZoeRax crimp tool. The tool supports both pass-through and non-pass-through connectors.

5.1. Video Demonstration

Video 1: Demonstration of RJ45 Cable Termination Process

5.2. Step-by-Step Guide

Six-step diagram showing how to make an RJ45 cable: 1. Trim excess cable, 2. Strip jacket, 3. Separate and arrange wires (T568A/B), 4. Insert wires into crimp dies, 5. Crimp and trim, 6. Check pins.

Figure 4: RJ45 Cable Creation Steps

  1. Trim Excess Cable: Use the integrated cable cutter to trim the cable to the desired length.
  2. Strip the Outer Jacket: Insert the cable into the stripping hole. The depth of the handle depression should be controlled according to the cable's diameter. Rotate the tool around the cable to strip approximately 1.5 cm (0.6 inches) of the outer sheath without damaging the inner wires.
  3. Arrange Wires: Separate the twisted pairs and arrange the individual wires according to the T568A or T568B wiring standard. Ensure the wires are straight and parallel.
  4. Insert Wires into Connector: For pass-through connectors, push the arranged wires through the connector until they exit the front. For non-pass-through connectors, insert the wires into the wire core of the connector. Make sure each cable reaches the header of the connector.
  5. Crimping: Insert the connector with the wires into the appropriate crimp nest (8P for RJ45, 6P for RJ11/RJ12). Hold the connector with one hand and press the handle of the tool all the way down with the other hand. The tool will precisely crimp the connector and trim any excess wires in one step.
  6. Verify: After crimping, ensure all pins are properly set and the connection is secure. Use an RJ45 tester to check for continuity and correct wiring if available.

5.3. Wiring Diagrams

Refer to the following diagrams for standard wiring configurations:

Wiring diagrams for T568B, 6P4C, T568A, and 6P6C standards, showing wire color order.

Figure 5: T568A/B and 6P4C/6P6C Wiring Standards

RJ45 Wiring Standards
Pin T568B T568A
1White OrangeWhite Green
2OrangeGreen
3White GreenWhite Orange
4BlueBlue
5White BlueWhite Blue
6GreenOrange
7White BrownWhite Brown
8BrownBrown

6. Maintenance

To ensure the longevity and optimal performance of your ZoeRax crimp tool, follow these maintenance guidelines:

  • Cleaning: After each use, wipe down the tool with a clean, dry cloth to remove any dust or debris.
  • Lubrication: Periodically apply a small amount of light machine oil to the moving parts and pivot points to ensure smooth operation.
  • Blade Replacement: The tool features a sharp quenching blade for cutting and stripping. If the blade becomes dull or damaged, it can be replaced. The product is known to come with replacement blades. For additional blades, please contact ZoeRax customer support.
  • Storage: Store the tool in a dry environment to prevent rust and corrosion. Use the locking mechanism to keep the tool safely closed when not in use.

7. Troubleshooting

Here are some common issues and their solutions:

  • Poor Crimp Quality:
    • Ensure the wires are fully inserted into the connector and aligned correctly according to the wiring diagram (T568A/B).
    • Verify that the connector is fully seated in the crimp nest before pressing the handle.
    • Check if the crimping dies are clean and free from obstructions.
  • Cable Jacket Not Stripping Properly:
    • Adjust the pressure applied to the handle when stripping to match the cable's diameter.
    • Ensure the cable is inserted correctly into the stripping hole.
    • The tool is designed for CAT6/5e cables. For thicker cables like CAT7 (shielded), extra care may be needed, or the stripping mechanism might not be ideal due to the cable's larger diameter.
  • Tool is Stuck/Locked:
    • Ensure the lock button is disengaged. Lightly press the handle and push the lock button out to unlock.

8. Specifications

Feature Description
Model NumberWXQ-RJ-C6-YE
TypeCable Crimper (All-in-one Wire Tool)
Brand NameZoeRax
OriginMainland China
FeaturesRJ45 Crimp Tool Pass Through, Ethernet cable tool, Pass Through Crimping Tool, Pass Through rj45 lan Tool
Supported ConnectorsRJ45 (8P8C), RJ12 (6P6C), RJ11 (6P4C)
Supported Cable TypesCAT6, CAT5, CAT5e (STP/UTP paired-conductor data cables)
Dimensions (Approx.)Length: 13.3 cm (5.23 in), Width: 3.5 cm (1.37 in), Height: 2.1 cm (0.82 in)
Weight (Approx.)0.35 kg
Battery IncludedNo
PackageYes

Note: Not for RJ45 connectors with 1.2mm hole diameters.

Dimensions of the ZoeRax crimp tool: 13.3cm length, 3.5cm width, 2.1cm height.

Figure 6: Tool Dimensions

9. User Tips

  • The tool is highly efficient for crimping, making cable termination quick and easy.
  • Its compact size makes it convenient for various working conditions, including on-the-go repairs.
  • The inclusion of replacement blades is a valuable feature, extending the tool's lifespan.
  • Many users find this tool excellent for DIY network fixes, especially when professional help is not readily available.
  • The tool's sturdy, all-metal construction contributes to its durability and long-term performance.

10. Support & Contact Information

For any inquiries, technical support, or to order replacement parts, please contact ZoeRax customer service:

A user manual in PDF format is also available for download. You can find it by searching for "ZoeRax RJ45 CAT6 Crimp Tool User Manual PDF" online or by contacting support.

© 2023 ZoeRax. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.