JBL A-Pillar Tweeter Refitting Kit Instruction Manual

1. Product Overview

This JBL A-Pillar Tweeter Refitting Kit is designed to upgrade the audio system in specific Toyota models by replacing the factory A-pillar trim with integrated JBL tweeters and alto horns. The kit provides an enhanced audio experience with 3D stereo surround treble.

Figure 1: Installed JBL A-pillar tweeter in a Toyota vehicle.

Figure 2: Graphic illustrating enhanced sound quality from speakers.

2. Compatibility

This kit is specifically designed for the following Toyota vehicle models and years:

Toyota Camry: 2018, 2019, 2020, 2021, 2022
Toyota Highlander: 2022
Toyota Avolan: 2019, 2020, 2021, 2022

Important: Ensure your vehicle's model and year match the compatibility list to guarantee proper fitment and functionality.

3. Package Contents

The package typically includes the following components:

A-Pillar Trim Panels with integrated JBL Tweeters
JBL Alto Horns (Mid-range speakers)
Special wiring plugs/harnesses for connection

Figure 3: Detailed view of speaker components including A-pillar speaker, airbag area, JBL Alto horn, and JBL Tweeter.

Components for Camry 2018-2022 A-pillar grey set, showing trim, Alto horns, and tweeters — Figure 4: Example components for Camry 2018-2022 A-pillar grey set.

4. Installation Guide

The installation process involves replacing the original A-pillar trim panels and connecting the new JBL speakers. This kit is designed for non-destructive installation using original car holes and special plugs, eliminating the need for punching or extensive modifications.

4.1 Preparation

Ensure the vehicle's ignition is off and the battery is disconnected to prevent electrical issues.
Gather necessary tools (e.g., trim removal tools, screwdriver set).

4.2 Removing Original A-Pillar Trim

Carefully pry off the original A-pillar trim panel using a trim removal tool. Start from the edges and work your way around.
Disconnect any wiring harnesses attached to the original trim or speakers, if present.

4.3 Installing JBL A-Pillar Tweeter Kit

Connect the provided special plugs from the new JBL speakers (tweeters and alto horns) to the corresponding wiring in your vehicle. These are designed to fit the original car holes without modification.
Align the new JBL A-pillar trim panel with the mounting points in your vehicle.
Gently press the new trim panel into place until it securely snaps into position. Ensure all clips are engaged.
Repeat the process for the other side of the vehicle.

Close-up of speaker installation showing original car hole, no punching required, and special plug — Figure 5: Installation detail showing original car hole and special plug connection.

Two A-pillar trims with integrated JBL speakers, illustrating non-destructive installation — Figure 6: Original panel replacement for non-destructive installation.

Before and After comparison of the A-pillar with and without the JBL tweeter installed — Figure 7: Visual comparison of the A-pillar before and after installation.

5. Operating Instructions

Once installed, the JBL A-pillar tweeters and alto horns integrate with your vehicle's existing audio system. Their operation is controlled directly by your car's head unit and audio settings.

Reconnect the vehicle battery.
Turn on the vehicle's ignition and audio system.
Adjust audio settings (e.g., treble, bass, balance, fader) on your car's head unit to optimize the sound output from the new speakers.
The tweeters are designed to provide clear, crisp high-frequency sounds, enhancing the overall audio experience with 3D stereo surround treble.

Graphic illustrating 3D stereo surround treble sound from the installed JBL tweeter — Figure 8: Illustration of 3D stereo surround treble sound.

6. Maintenance

The JBL A-pillar tweeters and alto horns require minimal maintenance. Follow these guidelines to ensure longevity and optimal performance:

Cleaning: Use a soft, dry cloth to gently wipe the speaker grilles and trim panels. Avoid abrasive cleaners or solvents that could damage the finish or speaker components.
Moisture: Keep the speakers dry. Avoid exposing them to excessive moisture or liquids.
Physical Damage: Protect the speakers from physical impact or sharp objects that could puncture the cones or grilles.

7. Troubleshooting

If you encounter issues with your JBL A-pillar tweeter kit, refer to the following troubleshooting steps:

Problem	Possible Cause	Solution
No sound from new speakers	Loose or incorrect wiring connection. Vehicle audio settings (e.g., fader, balance) are incorrect. Speaker is faulty.	Check all wiring connections to ensure they are secure and correctly plugged in. Verify audio settings on your car's head unit. If connections and settings are correct, contact support.
Distorted or poor sound quality	Incorrect audio settings (e.g., treble too high). Loose mounting of the speaker. Speaker damage.	Adjust treble and other EQ settings on your car's head unit. Ensure the A-pillar trim is securely fastened. Inspect speakers for visible damage.

8. Specifications

Feature	Detail
Item Type	Multi-tone & Claxon Horns (as per product classification)
Applicable Car Models	Toyota Camry (2018-2022), Highlander (2022), Avolan (2019-2022)
Speaker Type	JBL Tweeter, JBL Alto Horn (Mid-range)
Installation	Original panel replacement, non-destructive, no punching required
External Testing Certification	CC
Origin	Mainland China
Package Dimensions (approx.)	Length: 45 cm, Width: 35 cm, Height: 20 cm
Package Weight (approx.)	1.8 kg

9. Warranty and Support

This product is covered by standard manufacturer warranties. For specific warranty details or technical support, please refer to the seller's information or contact their customer service.

User Tips:

Verify Compatibility: Always double-check that your car's model and year are listed as compatible before purchasing and installing to avoid fitment issues.
Originality: The product is advertised as "Original JBL" components, ensuring quality and performance consistent with the brand.

	JBL Bar 5.1 Surround Software Update V22.49.21.00 Release Notes and Upgrade Guide Official release notes and step-by-step instructions for updating the firmware of the JBL Bar 5.1 Surround soundbar to version V22.49.21.00. Includes OTA and USB upgrade methods.
	JBL Club 194T 3/4" Edge-Driven Dome Tweeter - Installation and Specifications Detailed information on the JBL Club 194T, a 3/4" edge-driven dome tweeter. Includes specifications, assembly diagrams, and connection guidance for audio systems.
	Connecting JBL Speakers Together: A Comprehensive Guide Learn how to connect multiple JBL speakers wirelessly via Bluetooth for an enhanced audio experience. This guide covers connecting JBL speakers using the JBL Connect and Connect+ features, as well as troubleshooting common connection issues.
	JBL JS-120 Loudspeaker Stand - Features, Specifications, and Assembly Detailed information on the JBL JS-120 Loudspeaker Stand, including its features, technical specifications, compatible loudspeaker models, and assembly instructions. Designed for enhanced audio performance and stability.
	JBL Xtreme Quick Start Guide A comprehensive quick start guide for the JBL Xtreme portable speaker, covering setup, features, and warnings. Includes technical specifications in multiple languages.
	JBL Charge 5 Quick Start Guide A quick start guide for the JBL Charge 5 portable speaker, covering unboxing, Bluetooth pairing, playback, PartyBoost, app usage, charging, powerbank functionality, and IP67 water/dustproof rating.