1. Introduction
The Cherub GT-6 is a versatile 3-band equalizer (EQ) and preamp system designed for acoustic guitars. It features a highly accurate built-in chromatic tuner and a range of effects including phase, reverb, delay, chorus, and wide effects. Its compact design allows for easy integration into most acoustic guitars, with a visible portion measuring approximately 52mm x 54mm x 4mm. The unit also includes a low battery indicator to alert users when the 9V alkaline battery needs replacement.
2. Key Features
- 3-Band Equalizer: Independent controls for Low, Middle, and High frequencies to shape your guitar's tone.
- Built-in Chromatic Tuner: Highly accurate tuner with an LCD display for precise tuning.
- Integrated Effects: Includes Reverb, Delay, Chorus, and Wide effects for enhanced sound.
- Phase Function: A phase button to help eliminate feedback.
- Volume Control: Master volume knob for output level adjustment.
- Low Battery Indicator: An LED light (BATT.) indicates when the 9V battery is low.
- Wide Frequency Response: Operates across a frequency range of 20Hz to 20KHz.
- Piezo Ceramic Pickup: Utilizes a piezo ceramic pickup for clear acoustic sound reproduction.
3. Specifications
| Feature | Specification |
|---|---|
| Input Impedance | 10MΩ |
| Frequency Response | 20Hz-20KHz |
| Control Range (Low) | +/-12dB at 100Hz |
| Control Range (Middle) | +/-12dB at 800Hz |
| Control Range (High) | +/-12dB at 3KHz |
| Low Battery Check | LED indicator |
| Battery Life | Over 20 hours |
| Power Supply | 9V Alkaline Battery (not included) |
| Pickup Type | Piezo ceramic pickup |
| Output Jack | 6.35mm |
| Visible Dimension (W * L) | 5.2 * 5.4cm / 2.05 * 2.13in |
| Item Weight | 108g / 3.81oz |
| Package Size (L * W * H) | 15.2 * 8.2 * 4.3cm / 5.99 * 3.23 * 1.69in |
| Package Weight | 228g / 8.05oz |
4. Package Contents
The Cherub GT-6 package typically includes the following items:
- 1 x Cherub GT-6 Preamp Unit
- 1 x Battery Box with Output Jack
- 1 x Piezo Ceramic Pickup Wire (OMEGA-2)
- Mounting Screws
- Aluminum Cable Ties
- Owner's Manual (Paper)
5. Installation Guide
This section provides step-by-step instructions for installing the Cherub GT-6 preamp into your acoustic guitar. Professional installation is recommended if you are not experienced with guitar modifications.
- Step 1: String Spacing Measurement
Measure the maximum Low E to High E string spacing at the saddle. It should be approximately 2.5 inches (63.5mm). - Step 2: Drill Pickup Wire Hole
Drill a 2.00mm hole in the saddle slot for the OMEGA-2 pickup wire. - Step 3: Choose Location and Cut Cavity
Choose a compatible location on the side of your guitar for both the preamp and the battery box. Place the provided templates (available for download at www.cherubtechnology.com) on your selected location and carefully cut out the cavities. Drill pilot holes for the mounting screws. - Step 4: Install Pickup Wire and Saddle
Insert the tip side of the OMEGA-2 pickup wire into the hole in the saddle slot. Connect it to the preamp, then lay it flat in the saddle slot. Install the saddle after reducing its height by 1.4mm if necessary. - Step 5: Connect Preamp and Battery Box
Connect the preamp by inserting the 4-pin connector into the 4-pin receptacle on the battery box. Securely install both the preamp and the battery box using the provided screws. - Step 6: Secure Cables
Choose a suitable location inside the guitar for the aluminum cable ties and use them to fix and organize the cables.
6. Operation
The Cherub GT-6 offers intuitive controls for shaping your sound and tuning your instrument.
6.1 Controls Overview
- VOL. Knob: Adjusts the overall output volume of the preamp.
- LOW Knob: Controls the bass frequencies (±12dB at 100Hz).
- MIDDLE Knob: Controls the mid-range frequencies (±12dB at 800Hz).
- HIGH Knob: Controls the treble frequencies (±12dB at 3KHz).
- PHASE Button: Toggles the phase of the signal, useful for feedback reduction.
- REVERB/DELAY Knob: Adjusts the intensity of the reverb and delay effects.
- CHORUS/WIDE Knob: Adjusts the intensity of the chorus and wide effects.
- TUNER Button: Activates the chromatic tuner. The LCD display will show the note.
- BATT. LED: Illuminates when the 9V battery power is low.
6.2 Using the Tuner
Press the TUNER button to activate the chromatic tuner. The LCD display will show the detected note. Adjust your guitar strings until the display indicates the correct pitch. Press the TUNER button again to exit tuner mode.
7. Maintenance
7.1 Battery Replacement
The Cherub GT-6 is powered by a 9V alkaline battery. When the BATT. LED illuminates, it indicates that the battery power is low and needs to be replaced. To replace the battery:
- Locate the battery compartment, typically integrated with the output jack on the side of the guitar.
- Open the battery compartment cover.
- Remove the old 9V battery.
- Insert a new 9V alkaline battery, ensuring correct polarity.
- Close the battery compartment cover securely.
7.2 Cleaning
Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electronic components.
8. Troubleshooting
- No Sound Output:
- Check if the 9V battery is installed correctly and has sufficient charge (BATT. LED off).
- Ensure all cables (pickup to preamp, output jack to amplifier) are securely connected.
- Verify the VOL. knob is turned up.
- Poor Sound Quality / Distortion:
- Check battery level; a low battery can cause distortion.
- Adjust EQ settings (LOW, MIDDLE, HIGH) to find a balanced tone.
- Ensure the pickup is correctly seated in the saddle slot as per installation instructions.
- Tuner Not Working:
- Press the TUNER button firmly to ensure it is activated.
- Check battery level.
- Feedback Issues:
- Press the PHASE button to reverse the signal phase, which can help reduce feedback.
- Lower the volume or adjust EQ settings.
9. User Tips
- Many users find the built-in reverb and delay effects particularly pleasing and effective for acoustic guitar. Experiment with these controls to find your preferred sound.
- The chromatic tuner is noted for its precision, making it a reliable tool for quick and accurate tuning during performances or practice.
- For optimal sound, take time to adjust the 3-band EQ (Low, Middle, High) to suit your guitar's natural tone and the acoustics of your playing environment.
- Installation is generally straightforward for those with basic guitar modification skills, but careful attention to the provided diagrams is key.
10. Warranty and Support
For detailed warranty information and further technical support, please refer to the official Cherub Technology website or the comprehensive user manual PDF.
A digital version of the user manual can be accessed here: Cherub GT-6 User Manual (PDF)