1. Introduction
The Tedeligo WiFi+RF Smart Curtain Switch (CurtainWiFi Module) is a versatile device designed to automate your curtains, motors, roller shutters, and blinds. It offers multiple control options including traditional wired switches, RF wireless remote control, WiFi app control via Tuya or Smart Life, and voice control through smart assistants like Amazon Alexa and Google Home. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure a seamless smart home experience.


2. Safety Information
- Ensure the power supply is disconnected before installation or maintenance to prevent electric shock.
- Installation should be performed by a qualified electrician or in accordance with local electrical codes.
- Do not expose the device to moisture or extreme temperatures.
- Use only with compatible curtain motors and within specified voltage and current limits.
- Keep out of reach of children.
3. Package Contents
Please check that all items are present and in good condition:
- WiFi+RF Curtain Module (Receiver)
- RF Remote Control (Transmitter)
- Remote Control Base (for wall mounting)
- Screws for installation
- Terminals / Electric Wire (for connections)
- User Manual (this document)
4. Specifications
4.1. CurtainWiFi Module (Receiver)
| Parameter | Value |
|---|---|
| Model | CurtainWiFi |
| Working Voltage | AC 100V~240V |
| Output Type | Active output |
| WiFi Standard | IEEE 802.11 b/g/n 2.4GHz |
| Max Current | 16A (10A resistive load, 3A inductive load) |
| RF Frequency | 433MHz (433.92MHz) |
| Working Temperature | -30~+80℃ |
| Receiving Sensitivity | >-97dbm |
| Storage Remote Controls | Up to 20 pieces |
| RF Operating Mode | ASK superheterodyne wireless reception |
| Size | 45*45*20 mm |
| Standby Power | 2.2W |
4.2. RF Remote Control (Transmitter)
| Parameter | Value |
|---|---|
| RF Frequency | 433MHz |
| Size | 110*38*15 mm |
| Support Encoding | 1527 Learning code |
| RF Range | Up to 50 meters indoor (70 meters theoretical in open space) |
| Battery | 23A 12V (Not included) |

5. Installation and Wiring
5.1. Important Notes Before Installation
- The module requires both Live (L) and Neutral (N) lines for power.
- The module and remote are a matched set and cannot be used individually or with other brands.
- For initial use, fully open and close your curtain (100%) to allow the switch and app to calibrate the curtain's length.
- If the up/down direction is reversed on the remote or app, check your wiring connections.
5.2. Wiring Diagrams
There are two primary connection methods, depending on whether you are integrating with a traditional wall switch or connecting directly to the motor.


5.3. Installation Video
Watch this video for a visual guide on how to install and operate your smart curtain switch.
6. Operation
6.1. RF Remote Control
The RF remote control allows for wireless operation of your curtains. It comes with a base that can be conveniently mounted on a wall.

6.1.1. RF Signal Pairing
- Press the learning button on the curtain module once. The red indicator LED will turn off.
- Press the first button (e.g., UP button) on the remote control. The red indicator LED on the curtain module will flash several times and then light up, indicating successful pairing.
6.1.2. RF Signal Clearing
To clear all paired RF remote controls from the module:
- Press the learning button on the curtain module 8 times. The red indicator LED on the receiver will flash several times and then light up. All previously paired remotes will no longer work.

6.2. WiFi App Control (Tuya / Smart Life)
Control your curtains from anywhere using the Tuya or Smart Life app on your smartphone.
6.2.1. App Download
Search for "Smart Life" or "Tuya Smart" in your device's app store (Google Play for Android, App Store for iOS) or scan the QR codes below:

6.2.2. App Pairing
- Ensure your phone is connected to a 2.4GHz Wi-Fi network and Bluetooth is enabled.
- Power on the curtain module. It should automatically enter 'Pairing Network state' with the blue indicator LED flashing. If not, reset the device by pressing and holding the learning button on the module for about 10 seconds until the blue LED flashes.
- Open the "Tuya" or "Smart Life" APP.
- The curtain module icon should appear on the app interface. Follow the prompts to complete the setup. If it doesn't appear automatically, click 'add device' and select the 'Curtain module' icon.

6.2.3. App Features
- Open/Close/Pause: Directly control your curtains from the app interface.
- Scheduling: Set up timers and schedules for automatic curtain opening and closing.
- Group Control: Control multiple modules simultaneously.
- Device Sharing: Share control of the module with family members through the app.

6.3. Voice Control (Alexa / Google Assistant)
Integrate your smart curtain switch with Amazon Alexa or Google Assistant for hands-free voice control.
- Rename Device: Modify the device name in the Tuya/Smart Life app to something easily recognizable by your smart assistant (e.g., "Living Room Curtain").
- Link Account: Open your Alexa or Google Home app. Go to 'Skills' (for Alexa) or 'Works with Google' (for Google Home) and search for 'Smart Life' or 'Tuya Smart'. Enable the skill/service and link your account using your Tuya/Smart Life login credentials.
- Discover Devices: Ask your smart assistant to discover devices (e.g., "Alexa, discover devices" or "Hey Google, sync my devices").
- You can now control your curtains using voice commands (e.g., "Alexa, open the curtain" or "Hey Google, close the curtain").

6.4. Manual Switch Operation
If you have connected a traditional wall switch, it typically functions as a pulse switch:
- A single click on the manual switch will cause the motor to rotate until it reaches its end limit (fully open or closed).
- Pressing and holding the manual switch will cause the motor to rotate for as long as the button is held, stopping when released.
7. User Tips
- Remote Access: You can control your curtains via the mobile app from any city, as long as your module is connected to Wi-Fi and your phone has internet access.
- Multiple Remotes: The module can store up to 20 remote controls, allowing multiple users or remotes to control the same curtain.
- Simultaneous Control: Both the RF remote control and WiFi app control can be used simultaneously to operate the curtain module.
- Curtain Calibration: If your motor stops prematurely, use the "Accurate Calibration" feature in the app's settings to properly set the travel limits.
8. Troubleshooting (FAQ)
8.1. App Displays Offline / Cannot Control
- Allow 1-2 minutes for the device to connect to the network after adding.
- Check Wi-Fi Indicator: If the blue LED is off, the device is not connected to Wi-Fi.
- Incorrect Wi-Fi Password: Verify the password entered during setup.
- Router Overload: Ensure your router's maximum Wi-Fi device capacity is not exceeded.
- Signal Strength/Interference: Move the device closer to the router. If no improvement, power cycle the device and re-add.
- 5G Wi-Fi: The device does not recognize 5G Wi-Fi. Ensure you are connected to a 2.4G Wi-Fi network.
- MAC Address Filtering: Check your router settings and disable MAC address filtering if it's enabled.
- Personal Hotspot: If all else fails, try using a personal hotspot from another phone to re-add the device.
8.2. Remote Control Not Working
- Check Batteries: Verify if the 23A 12V battery in the remote control is depleted. The remote's indicator LED may not light up or be dim.
- Reset and Reprogram: Reset and reprogram both the receiver (module) and transmitter (remote) as per the RF pairing instructions.
8.3. Motor Stops Prematurely
- Access the 'Setting' interface of the curtain module in the app and use the "Accurate Calibration" function to set the motor's travel limits.
9. Maintenance
- Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Ensure proper ventilation around the module to prevent overheating.
- Regularly check wiring connections for any signs of wear or damage.
- Replace remote control batteries as needed to ensure optimal performance.
10. Product Application Area
This smart curtain module is suitable for a wide range of applications, including:
- Residential homes
- Offices
- Hotels and villas
- Commercial markets
- Factories and industrial settings

11. Certifications
The Tedeligo WiFi+RF Smart Curtain Switch complies with relevant safety and quality standards.

12. Support and Contact Information
If you encounter any issues or have questions not covered in this manual, please contact our support team:
- WhatsApp: +86 135 0227 8583 / +86 181 3880 5271
- Email: dieseelectronic@163.com
- Address: Room 03, 12th Floor, Building T19, East Coast Garden, Fangzhilonghuwan, No. 27, Sanhuan South Road, Huicheng District, Huizhou City, Guangdong Province, China 516001
We are committed to providing the best service to our customers.
