1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your NERIES Intelligent Dual-mode Electric Bicycle Controller (Model: DSL-QX074KQ). This controller is designed for 2-wheel e-bikes, offering steady speed control, sensitive braking, and anti-theft features. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Safety Information
- Electrical Safety: Always disconnect power before installing or servicing the controller. Improper wiring can lead to electrical shock, damage to the controller, or fire.
- Professional Installation: If you are unsure about any installation steps, seek assistance from a qualified technician.
- Environmental Conditions: Ensure the controller is installed in a location protected from excessive moisture, dust, and extreme temperatures to prevent damage.
- Compatibility: This product supports single Hall sensors or dual Hall sensors with a duty cycle of 60% or higher. Verify compatibility with your e-bike's motor and display before installation.
- Fire Risk: When dealing with electrical components, always be mindful of potential fire risks. Ensure all connections are secure and insulated.
3. Specifications

Image: NERIES Controller showing dimensions (9cm x 5.2cm x 3cm) and weight (196g).
| Feature | Description |
|---|---|
| Brand | NERIES |
| Model | DSL-QX074KQ |
| Power | 250W / 350W |
| Voltage | DC 24V-48V |
| Current Limit | 13A |
| Material | Aluminum Alloy |
| Dimensions (L*W*H) | 9cm * 5.2cm * 3cm |
| Weight | 196g |
| Key Features | Intelligent dual-mode, shock-resistant, durable, steady speed, sensitive control, effective internal circuit protection, heat dissipation, low failure rate. |
| Sensor Compatibility | Single Hall sensors or dual Hall sensors with a duty cycle of 60% or higher. |
4. Package Contents
Your package should contain the following item:
- 1 x NERIES Intelligent Dual-mode Electric Bicycle Controller (DSL-QX074KQ)
5. Installation and Wiring
Before beginning installation, ensure your e-bike's power is completely off and the battery is disconnected. Refer to the wiring diagram below for correct connections.

Image: Detailed wiring diagram for the NERIES Electric Bicycle Controller, showing connections for power, brakes, motor, and sensors.
Wiring Instructions:
- Power Positive Electrode: Connect the red wire to the positive terminal of your e-bike's battery.
- Power Negative Pole: Connect the black wire to the negative terminal of your e-bike's battery.
- Main Electric Door Lock: Connect this wire to your e-bike's main power switch or ignition.
- Brake Light Socket: Connect to your e-bike's brake light system.
- Brake Off: Connect to your e-bike's brake levers. This connection typically cuts power to the motor when brakes are applied.
- Pulse Assist Sensor: Connect to your e-bike's pedal assist sensor (PAS).
- Intelligent Phase Recognition: These wires are used for automatic motor phase recognition. Follow the specific instructions for your motor or connect them as indicated in the diagram.
- Cruise Control: Connect to your e-bike's cruise control switch, if applicable.
- Motor Hall: Connect the Hall sensor wires from your motor to the corresponding connectors on the controller. Ensure correct color matching.
- Phase Line of Brushless Motor: Connect the three thick phase wires from your brushless motor to the corresponding connectors on the controller.
- Turn the Handle (Throttle): Connect your e-bike's throttle (speed control handle) to this connector.
Important: Double-check all connections for correct polarity and secure fitting before reconnecting the battery and powering on the system.
6. Operating Instructions
Once the controller is correctly installed and wired, you can begin operating your e-bike.
- Power On: Turn on your e-bike's main power switch. The controller will initialize.
- Speed Control: Use the throttle (turn handle) to control the speed of your e-bike. The intelligent design provides steady and responsive speed adjustments.
- Braking: Applying the brakes will cut power to the motor, ensuring safe stopping.
- Pedal Assist: If connected, the pulse assist sensor will provide motor assistance based on your pedaling input.
- Anti-theft Feature: The controller includes an anti-theft function. Consult your e-bike's specific anti-theft system instructions for activation and use.
- Cruise Control: If your e-bike has a cruise control switch connected, activate it to maintain a constant speed.
7. Maintenance
To ensure the longevity and optimal performance of your controller, follow these maintenance guidelines:
- Keep Clean: Regularly wipe the controller's exterior with a dry, soft cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners.
- Check Connections: Periodically inspect all wiring connections to ensure they are secure and free from corrosion. Loose connections can lead to intermittent operation or damage.
- Avoid Moisture: While the aluminum alloy casing provides some protection, avoid exposing the controller to heavy rain or submerging it in water.
- Heat Dissipation: Ensure the controller is not obstructed, allowing for proper airflow and heat dissipation.
8. Troubleshooting
If you encounter issues with your controller, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Motor does not start | No power, loose connections, faulty throttle, motor Hall sensor issue. | Check battery connection, main electric door lock, and all wiring. Test throttle functionality. Verify motor Hall sensor connections. |
| Inconsistent speed or jerky operation | Loose motor phase wires, Hall sensor issues, faulty throttle. | Ensure motor phase and Hall sensor wires are securely connected. Inspect throttle for damage. |
| Brakes not cutting power | Brake off wire disconnected or faulty brake lever switch. | Check the 'Brake off' wire connection and the functionality of your brake levers. |
| Controller overheating | Overload, poor ventilation, short circuit. | Reduce load on the motor. Ensure controller has adequate airflow. Check for any short circuits in the wiring. |
If the problem persists after trying these solutions, please contact customer support.
9. User Tips
- Display Compatibility: Users have inquired about compatibility with S866 displays. While the controller is intelligent dual-mode, always verify the specific protocol (e.g., Protocol 1 or 2) required by your display and ensure it matches the controller's capabilities for optimal performance.
- Current Limit Clarification: The controller has a current limit of 13A. Ensure your motor and battery system are compatible with this specification to prevent damage.
- Secure Mounting: Mount the controller securely to your e-bike frame, away from direct impact zones and areas prone to water splashes.
10. Warranty and Support
For any warranty claims, technical support, or further assistance, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.