Introduction
The Andoer L5i Camera Video Auto Dolly is a versatile, motorized 3-wheel slider designed to enhance your photography and videography. It features mobile APP control, stepless speed adjustment, and support for various shooting modes including time-lapse and A-B point positioning. Its compact design and 3kg load capacity make it suitable for DSLR, ILDC cameras, and smartphones.
Package Contents
Please check the package to ensure all items are present:
- 1 x Andoer L5i Auto Dolly
- 1 x USB Charging Cable (Type-C)
- 1 x Mutual Screw (1/4 inch & 3/8 inch)
- 1 x Large Rubber Ring
- 1 x Mini Wrench
- 1 x User Manual (English & Chinese)
Setup Guide
Charge the Dolly: Before first use, fully charge the auto dolly using the provided Type-C USB charging cable. Connect the cable to the charging port on the dolly and a suitable USB power source. The indicator light will show charging status.
Type-C interface charging for the built-in 1800mAh battery. Mount Your Camera/Smartphone:
- Attach the mutual screw (1/4 inch & 3/8 inch) to the top of the dolly.
- Mount your DSLR/ILDC camera or smartphone (using a compatible phone holder, not included) onto the mutual screw. Ensure it is securely fastened. The dolly supports a maximum load of 3kg.
Mounting a camera or smartphone using the mutual screw. 
Dolly with a camera mounted. Download the APP: Scan the QR code provided in the user manual or on the product packaging to download the official Andoer L5i APP for your Android or iOS device.
QR codes for Android and Apple app downloads. Connect via APP: Turn on the auto dolly. Open the APP on your mobile phone and follow the on-screen instructions to connect to the L5i device. The remote control distance is up to 8 meters without interference.
Operating Instructions
The Andoer L5i offers various shooting modes and adjustable settings via its mobile APP.
1. Adjusting Wheel Angles for Path
The wheels of the dolly can be adjusted to create straight or curved paths. Simply rotate the wheels to the desired angle for your shot. The markings on the dolly indicate the angle of adjustment.
2. Mobile APP Control
Use the dedicated mobile APP to control the dolly's movement and settings.
- Video Mode: For continuous video recording.
- Time-Lapse Mode: For capturing time-lapse sequences with customizable parameters.
- Shutter Control: The APP's shutter button supports most mirrorless cameras (requires a shutter cable, not included).
- Automation: Set up automated movements and loops.
3. Shooting Modes
Straight-Line/Curved-Line Shooting: Place the dolly on a flat surface or desktop. Adjust the wheel angles to achieve either a straight path or a curved trajectory. This is ideal for smooth tracking shots.
Straight and curved line shooting capabilities. A-B Point Positioning Shooting: Supports automatic loop shooting between two designated points (A and B) without frequent manual operation. This is useful for repetitive movements or interviews.
Time-Lapse Photography: Utilize the APP's time-lapse mode to set parameters such as intervals, number of shots, and shutter time. A shutter cable is required for linkage with the camera.
Time-lapse photography setup with app control.
4. Speed Adjustment
The dolly features stepless speed regulation from 0% to 100%, with a maximum speed of 10cm/s. Adjust the speed via the mobile APP to achieve the desired motion for your shots.
5. Silent Shooting
The dolly adopts a stepping motor for precise control and low noise operation, allowing for quiet close-range video recording.
6. Product Video Demonstration
Maintenance
- Charging: Recharge the built-in 1800mAh Li-ion battery when the battery indicator on the APP or dolly shows low power. A full charge takes approximately 3 hours and provides about 4 hours of working time.
- Cleaning: Use a soft, dry cloth to clean the dolly. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the dolly in a cool, dry place away from direct sunlight and extreme temperatures.
- Heat Emission: The dolly features upgraded heat emission holes. Ensure these are not obstructed during operation to maintain optimal performance and product longevity.
Troubleshooting
- Dolly not moving: Check if the dolly is powered on and fully charged. Ensure it is properly connected to the mobile APP.
- APP connection issues: Make sure Bluetooth is enabled on your phone and the dolly is within the 8-meter control range. Restart both the APP and the dolly if connection fails.
- Inaccurate movement: Verify that the wheels are clean and free from debris. Ensure the surface the dolly is operating on is flat and smooth. Re-adjust wheel angles if necessary.
- Camera not triggering: Confirm that the shutter cable is correctly connected to both the camera and the dolly's shutter port. Check camera settings and APP shutter settings.
Specifications
| Feature | Detail |
|---|---|
| Brand | Andoer |
| Model Number | L5i |
| Photography Accessories Type | Autodolly/Video Dolly |
| Material | Plastic |
| Load-bearing Range | max. 3kg |
| Battery Capacity | 1800mAh |
| Charging Time | About 3 hours |
| Working Time | About 4 hours (after fully charged) |
| Control Distance | max. 8M (APP remote control, without interference) |
| Speed | max. 10cm/s |
| Speed Adjustable | 0%-100% (stepless) |
| Item Weight | 446g / 15.7oz |
User Tips
- APP Compatibility: The mobile application for the Andoer L5i is compatible with both Android and iOS systems and is designed to function globally, including in Europe.
- Smooth Surfaces: For the best performance and smoothest shots, always use the dolly on a clean, flat, and even surface.
- Shutter Cable: Remember that a separate shutter cable is required to link your camera with the dolly for shutter control, especially for time-lapse photography.
Support
For further assistance, technical support, or inquiries regarding your Andoer L5i Camera Video Auto Dolly, please refer to the contact information provided by your retailer or the official Andoer website.
