HONGWIN F32Z-9C968A

Contents

Fuel Pressure Regulator Instruction Manual

Model: F32Z-9C968A

Brand: HONGWIN Auto Trading

1. Introduction

This manual provides essential information for the proper understanding and general guidance for the installation, operation, and maintenance of your HONGWIN Fuel Pressure Regulator, model F32Z-9C968A. A fuel pressure regulator is a crucial component in your vehicle's fuel injection system, designed to maintain a consistent fuel pressure to the fuel injectors, ensuring optimal engine performance and fuel efficiency.

2. Product Overview

The F32Z-9C968A Fuel Pressure Regulator is a precision-engineered component built for durability and reliable performance. It is designed to meet or exceed OEM specifications for the listed compatible vehicles.

HONGWIN Fuel Pressure Regulator F32Z-9C968A

Figure 1: HONGWIN Fuel Pressure Regulator F32Z-9C968A. Part numbers F32Z-9C968A and KL0113280 are visible on the packaging.

Dimensional drawing of the Fuel Pressure Regulator

Figure 2: Dimensional drawing of the Fuel Pressure Regulator. Key dimensions include 23.4mm (0.92") top diameter, 4.7mm (0.18") and 6mm hose connections, 69.2mm (2.71") overall height, and 54mm (2.12") mounting bracket width.

Video 1: Product showcase of the HONGWIN Fuel Pressure Regulator.

3. Compatibility

This Fuel Pressure Regulator is compatible with the following vehicle models:

  • Ford Probe 1993-1997 2.0L 1989CC 122Cu. In. l4 GAS DOHC Naturally Aspirated
  • Mazda MX-3 1992-1993 1.8L 1845CC V6 GAS Naturally Aspirated
  • Mazda MX-3 1992-1995 1.8L 1845CC V6 GAS DOHC Naturally Aspirated
  • Mazda 626 1993-2002 2.0L 1991CC l4 GAS DOHC Naturally Aspirated
  • Mazda MX-6 1993-1997 2.0L 1991CC l4 GAS DOHC Naturally Aspirated

4. Installation

WARNING: Installation of automotive fuel system components should only be performed by a qualified technician. Improper installation can lead to fuel leaks, fire hazards, and severe injury or death. Always disconnect the vehicle's battery and relieve fuel system pressure before beginning work.

  1. Ensure the engine is cool and the fuel system pressure has been safely relieved.
  2. Locate the existing fuel pressure regulator on your vehicle. Refer to your vehicle's service manual for exact location and removal procedures.
  3. Carefully disconnect the vacuum line and fuel lines from the old regulator. Be prepared for residual fuel spillage.
  4. Remove the mounting bolts or clips securing the old regulator.
  5. Install the new HONGWIN Fuel Pressure Regulator, ensuring all connections (fuel lines, vacuum line) are secure and free of leaks. Use new O-rings or gaskets as required.
  6. Reconnect the battery.
  7. Turn the ignition to the 'ON' position (without starting the engine) several times to prime the fuel system and check for any leaks before starting the engine.
  8. Start the engine and re-check for leaks. Monitor fuel pressure if a gauge is available.

5. Operation

The fuel pressure regulator operates by controlling the amount of fuel that returns to the fuel tank. It uses engine vacuum to adjust the fuel pressure, ensuring that the fuel injectors receive a constant and correct fuel pressure relative to the intake manifold pressure. This precise control is essential for accurate fuel delivery, which impacts engine performance, emissions, and fuel economy.

6. Maintenance

Fuel pressure regulators are generally maintenance-free components. However, periodic inspection is recommended:

  • Visual Inspection: Regularly check the regulator and surrounding fuel lines for any signs of leaks, cracks, or damage.
  • Hose Connections: Ensure all fuel and vacuum hose connections are tight and not deteriorated.
  • Replacement: If the regulator shows signs of failure (see Troubleshooting), it should be replaced promptly. Do not attempt to repair a faulty fuel pressure regulator.

7. Troubleshooting

A faulty fuel pressure regulator can lead to various engine performance issues. Common symptoms include:

  • Rough Idle: Inconsistent fuel pressure can cause the engine to run unevenly.
  • Hard Starting: Both excessively high or low fuel pressure can make the engine difficult to start.
  • Poor Fuel Economy: Incorrect fuel pressure can lead to inefficient fuel consumption.
  • Black Smoke from Exhaust: Often indicates an overly rich fuel mixture due to high fuel pressure.
  • Fuel Smell: A strong fuel odor, especially from the vacuum line, can indicate a ruptured diaphragm within the regulator.
  • Engine Misfires or Stalling: Inconsistent fuel delivery can cause the engine to misfire or stall.

If you experience any of these symptoms, it is advisable to have your fuel system diagnosed by a professional technician.

8. Specifications

AttributeValue
Manufacturer Part NumberF32Z-9C968A, F32Z9C968A
Interchange Part NumberKL0113280, PR4048, FS05-13-280
Other Part NumberPR99, FP10056, 1580322, 89054463, PR4048, FP10055
Special FeaturesFuel Pressure Regulator
Placement on VehicleFuel Pump
MaterialSTEEL, PLASTIC / ALUMINIUM
Item Weight100g
Item Height1 (refer to dimensional drawing for specific measurements)
Item Width1 (refer to dimensional drawing for specific measurements)
Item LengthFuel Injection Pressure Regulator (refer to dimensional drawing for specific measurements)
Country/Region of ManufactureChina
OriginMainland China
Hign-concerned ChemicalNone
Top Diameter23.4mm (0.92")
Hose Connection 14.7mm (0.18")
Hose Connection 26mm
Overall Height69.2mm (2.71")
Mounting Bracket Width54mm (2.12")

9. User Tips

No specific user tips or common questions were available from provided customer reviews or Q&A data for this product. Always ensure proper vehicle diagnosis before replacing parts.

10. Warranty & Support

This HONGWIN Fuel Pressure Regulator comes with a ONE YEAR guarantee from the date of purchase. For any support or warranty claims, please contact HONGWIN Auto Parts Co., Ltd. directly through your purchase platform or their official channels.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.