UOTEK UT-890A / UT-890J

Contents

UOTEK USB to RS-422 RS-485 Converter Instruction Manual

Model: UT-890A / UT-890J

Brand: UOTEK

1. Introduction

The UOTEK UT-890A / UT-890J is a universal USB to RS-485/422 converter designed to facilitate data transmission between personal computers and industrial equipment utilizing RS-485/422 interfaces. As modern PCs increasingly rely on USB ports, this converter bridges the gap, allowing seamless communication with legacy serial devices.

This converter operates without the need for an external power supply and is fully compatible with USB 1.1, 1.0, and 2.0 standards, as well as RS-485 and RS-422 EIA standards. It efficiently converts USB signals into balanced differential RS-485/422 signals, ensuring reliable data transfer.

UOTEK USB to RS-485/422 Converter cable with USB-A and DB9 connectors
Figure 1: UOTEK USB to RS-485/422 Converter Cable (UT-890A model shown)

2. Key Features

  • Universal Compatibility: Supports USB 1.1, 1.0, 2.0, RS-485, and RS-422 EIA standards.
  • No External Power Required: Draws power directly from the USB port.
  • Robust Protection: Features surge protection for each wire and ±15KV ESD protection for ports.
  • High-Speed Transmission: Tiny interelectrode capacitance ensures high-speed data transfer for RS-422/485 ports.
  • Automatic Data Flow Control: Internal zero-delay auto receiving and transmitting function, with a unique I/O circuit that automatically controls data flow direction without requiring handshake signals (RTS, DTR).
  • Plug & Play: No jumper wire settings needed for full-duplex (RS-422) and half-duplex (RS-485) modes.
  • Point-to-Point & Multi-Point Communication: Supports connecting up to 32 sets of RS-422 or RS-485 devices in multi-point mode.
  • Wide Baud Rate Support: Automatically detects serial signal baud rates from 300 to 921.6Kbps.
  • Visual Indicators: LEDs for Power (PWR), Transmitting (TXD), and Receiving (RXD) activity.
  • Enhanced Signal Integrity: Equipped with a magnetic ring to reduce electromagnetic interference.
  • Wide Operating Temperature: Functions reliably in environments from -40℃ to 85℃.
  • Imported Chipset: Utilizes a high-quality FTDI chipset for stable performance.
Close-up of the FTDI chipset on a circuit board
Figure 2: High-quality FTDI Chipset for reliable performance.
Diagram showing the internal structure of the cable with tinned copper core, filter shielding, braid, and PVC insulation
Figure 3: Cable construction details, highlighting tinned copper core and shielding for durability and signal integrity.

3. Specifications

ParameterDescription
StandardsUSBV1.1, 1.0, 2.0, RS-485, RS-422 EIA
USB SignalVCC, DATA+, DATA-, GND, FG
RS-485 SignalT/R+, T/R-, GND
RS-422 SignalT/R+, T/R-, RXD+, RXD-, GND
Working ModeAsynchronous, point to point or point to multi-point, 2 wires half-duplex or 4 wires full-duplex
Direction ControlAutomatic traffic direction control technology
Baud Rate300-921.6Kbps (auto-detect serial signal)
Loading CapacitySupports up to 32 sets of RS-422 or RS-485 devices
Transmission Distance1,200m (RS-485/422 at 9,600bps), 5m (USB)
Port ProtectionSurge protection, ±15KV ESD protection
ConnectorsUSB-A male, DB9 male
IndicatorsLEDs for PWR, TXD, and RXD
Transmission MediaTwisted-pair or shielded cable
Cable Length1.5m (UT-890A) / 3m (UT-890J)
Operating Temperature-40℃ to 85℃
Relative Humidity5% to 95%
Supported OSWin2000/2003/2008/2012/XP/Vista/7/8/8.1/10/CE/Mac/Linux/iOS/Android
Dimension diagram of the UOTEK USB to RS-485/422 converter, showing USB-A male, magnetic filter, transparent USB 2.0 cable, DB9 male, and exquisite housing with UK FTDI chipset. Dimensions are in mm and inches.
Figure 4: Product Dimensions and Components (UT-890A shown with 1.5m length).
Image showing the operating temperature range from -40°C to 85°C, with scenes of snowy mountains and industrial heat.
Figure 5: Wide operating temperature range for industrial applications.

4. Package Contents

The package includes the following items:

  • 1 x UOTEK USB to RS-485/422 Converter Cable (UT-890A or UT-890J)
  • 1 x Terminal Block (for DB9 connection)
  • 1 x User Manual (this document)
Image showing the product packaging and the converter cable with terminal block
Figure 6: Typical package contents.

5. Setup and Installation

5.1 Driver Installation

The UOTEK UT-890A / UT-890J converter typically operates as a Plug & Play device on most modern operating systems (Windows 7/8/8.1/10, Mac, Linux). Drivers are usually installed automatically upon connecting the device. If automatic installation fails, please refer to the manufacturer's website for the latest driver downloads.

5.2 Hardware Connection

  1. Connect the USB-A male connector of the converter cable to an available USB port on your computer (PC or Notebook).
  2. Connect the DB9 male connector of the converter to your RS-485 or RS-422 compatible device.
  3. For devices requiring terminal block connections, attach the provided terminal block to the DB9 connector.
Diagram showing the USB to RS-485/422 converter connected to a laptop and an industrial device via a terminal block
Figure 7: Connection example with a laptop and an industrial device.

5.3 Wiring for RS-485/422

Refer to the following pin assignment table for correct wiring of your RS-485 or RS-422 device to the DB9 connector/terminal block.

Table showing DB9 male pin assignments for RS-422 full-duplex and RS-485 half-duplex connections, along with a diagram of the USB-A pin assignment.
Figure 8: Connector & Signal Pin Assignment for DB9 and USB-A.
DB9 PinOutput SignalRS-422 Full-Duplex ConnectionRS-485 Half-Duplex Connection
1T/R+TX(A+)RS-485 (A+)
2T/R-TX(B-)RS-485 (B-)
3RXD+RX(A+)-
4RXD-RX(B-)-
5GNDGNDGND
6N/A
7N/A
8N/A
9N/A

6. Operation

Once the converter is connected and drivers are installed, it functions as a virtual serial port on your computer. You can use standard serial communication software to interact with your RS-485/422 devices.

  • Power Indicator (PWR): A red LED illuminates when the converter is powered via the USB port.
  • Transmitting Indicator (TXD): A green LED flashes when data is being transmitted from the computer to the serial device.
  • Receiving Indicator (RXD): A green LED flashes when data is being received by the computer from the serial device.
Close-up of the converter showing the Power, Receiving, and Transmitting LED indicators
Figure 9: LED indicators for power and data flow.

7. Compatibility

7.1 Operating System Compatibility

The converter supports a wide range of operating systems, including:

  • Windows: 2000, 2003, 2008, 2012, XP, Vista, 7, 8, 8.1, 10, CE
  • Mac OS
  • Linux
  • iOS
  • Android

7.2 Device Compatibility

This converter is suitable for connecting various devices with RS-485/422 interfaces to your computer, such as:

  • Modems
  • Thermal Printers
  • FCR (Fiscal Cash Registers)
  • Set-top Boxes
  • PDAs
  • Numerical Control Machines
  • Industrial Instruments
Diagram showing a PC and Notebook connected via the converter to various devices like Modem, Thermal printer, FCR, Set-top box, PDA, Numerical control machine, and Industrial Instrument.
Figure 10: Broad device compatibility for industrial and commercial applications.

8. User Tips

  • For optimal performance, ensure your operating system is up-to-date and any necessary drivers are correctly installed.
  • When connecting to multiple devices in a multi-point configuration, verify that each device is properly terminated and addressed according to your RS-485/422 network specifications.
  • If experiencing communication issues, check the TXD and RXD LEDs to confirm data activity. No flashing might indicate a wiring problem or incorrect software settings.

9. Troubleshooting

  • No Power (PWR LED off): Ensure the USB cable is securely connected to both the computer and the converter. Try a different USB port or computer.
  • No Data Transmission/Reception (TXD/RXD LEDs not flashing):
    • Verify that the drivers are correctly installed on your operating system.
    • Check the wiring between the converter's DB9 connector/terminal block and your serial device, referring to the pin assignment diagram (Figure 8).
    • Confirm that your serial communication software settings (COM port, baud rate, data bits, parity, stop bits) match those of your connected device.
    • Ensure the serial device itself is powered on and functioning correctly.
  • Intermittent Communication:
    • Check for electromagnetic interference. The magnetic ring on the cable helps, but ensure the cable is not routed near strong electrical noise sources.
    • Verify cable length and quality. For long distances, use high-quality twisted-pair or shielded cable.
    • In multi-point setups, ensure proper termination resistors are used on the RS-485/422 bus if required by your network design.
  • Device Not Recognized:
    • Disconnect and reconnect the converter.
    • Restart your computer.
    • Check Device Manager (Windows) or equivalent (Mac/Linux) to see if the virtual COM port is listed without errors.

10. Maintenance

To ensure the longevity and optimal performance of your UOTEK converter, please follow these maintenance guidelines:

  • Keep the device in a dry environment, away from moisture and liquids.
  • Avoid exposing the converter to extreme temperatures outside its specified operating range (-40℃ to 85℃).
  • Handle the cable and connectors with care to prevent physical damage.
  • Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Store the converter in a safe place when not in use to prevent accidental damage.

11. Warranty and Support

UOTEK products are rigorously tested to ensure quality and reliability. This product comes with a 1-year warranty from UOTEK.

If you encounter any technical problems or have questions regarding the operation of your converter, please do not hesitate to contact UOTEK customer support. Our engineers are available to provide assistance and help resolve any issues you may experience.

Image showing customer support information, including 7 days return, 1 year warranty, and shopping help.
Figure 11: UOTEK Warranty and Service Information.

12. Certifications

This product complies with the following international standards and certifications:

  • CE
  • FCC
  • RoHS
Collage of various UTEK certificates including ISO, CE, FCC, and RoHS compliance documents.
Figure 12: Product Certifications.

13. Product Overview Video

Video 1: UOTEK USB to RS-485/422 Converter Product Overview.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.