Bafang SR PA2X2.32.ST

Contents

Bafang Torque Sensor (SR PA2X2.32.ST) User Manual

Model: SR PA2X2.32.ST Series

1. Product Overview

The Bafang SR PA2X2.32.ST series torque sensor is a crucial component for electric bicycles, providing precise torque and speed sensing for an enhanced riding experience. This sensor is designed for integration into the bicycle's bottom bracket.

1.1 Key Features

  • High Precision: Offers excellent linearity and fast dynamic response for accurate power assistance.
  • Non-Contact Design: Insensitive to bending and axial movement, ensuring long-term stability and reliability.
  • Independent Sensing: Chainring and crank positions are sensed separately to generate precise torque data.
  • Dual-Side Torque Sensing: Provides torque signals from both sides with a left-right error of less than 1.5%.
  • Combined Output: Simultaneously outputs both torque and speed signals.
  • Compact Size: Designed for installation on standard 68mm bottom brackets (internal thread BC1.37" x 24T), with custom lengths available.

1.2 Product Identification

The sensor bracket features a unique identification number, typically arranged in two rows. This number includes the product model, hardware version, cable length/connector code, production date, and serial number. For example, SR PA242.32.ST 3.1 indicates the model and hardware version, while XXXF7QB280001 provides details on the cable, production date, and serial number.

Important: The laser-etched code and QR code label must not be maliciously erased, polished, or damaged. Any such alteration will void after-sales service.

Bafang Torque Sensor with QR code label
Bafang Torque Sensor with its unique identification label.

1.3 Applicable Scope

This torque sensor is compatible with bicycles featuring bottom bracket lengths of 68mm, 73mm, 84mm, 100mm, 110mm, and 120mm. The bottom bracket must have an internal thread specification of BC1.37" x 24T.

Note: The 73mm and 68mm specifications are compatible. If you require a 68mm bottom bracket, you can select the 73mm option, and two 2.5mm washers will be provided for proper fitment.

Bafang Torque Sensor main product view
Main view of the Bafang Torque Sensor.
Bafang Torque Sensor on a laptop keyboard
Close-up of the Bafang Torque Sensor.
Multiple Bafang Torque Sensors in packaging
Multiple Bafang Torque Sensors, showing different configurations.

2. Specifications

ParameterValue
TypePAS sensor (Torque Speed Sensor)
ModelSR PA2X2.32.ST Series
OriginMainland China
Input VoltageDC 5 ±0.5V DC
Input Power< 0.15W
Output Speed Signal Pulses32 pulses per rotation
Output Torque Signal Range0.5-80 N.m
Output Torque Signal Voltage0.75-3.2V
AccuracyLeft-right error < 1.5%
Detection TypeDynamic and Static
Protection LevelIP54
Storage Temperature0℃ to 60℃
Operating Environment Temperature-20℃ to 45℃
Relative Humidity15-95% RH
AltitudeNot exceeding 1500m
Atmospheric Pressure86-106 kPa
Weight (approx.)0.65 kg
Lead Wire LengthL=250mm (approx.)
Standards & CertificationsCE, EN15194/14764/14766

Note: Product performance is subject to continuous updates. Please refer to the latest data before matching or integration.

2.1 Dimensions Diagram

Torque sensor dimensions diagram
Detailed dimensions of the torque sensor. (Note: This image is a placeholder for the actual diagram from OCR page 6, which is not directly embeddable as a separate image. Please refer to the full PDF manual for precise measurements.)

2.2 Performance Curves and Waveforms

Torque vs. Voltage performance curve
Torque vs. Voltage performance curve. (Note: This image is a placeholder for the actual graph from OCR page 7, which is not directly embeddable as a separate image. Please refer to the full PDF manual for precise data.)

The sensor outputs 32 pulse signals for every 360° of forward rotation. During reverse rotation, the signal output remains at a high level.

Forward and reverse rotation signal waveforms
Forward and reverse rotation signal waveforms. (Note: This image is a placeholder for the actual waveforms from OCR page 8, which are not directly embeddable as separate images. Please refer to the full PDF manual for precise data.)

2.3 Connector and Wiring

The sensor uses specific connectors for communication. The PA261.32.ST.C 12 is the CAN Bus version. A UART to CAN cable may be supplied if required.

UART to CAN cable
UART to CAN cable for connectivity.
PinWire ColorFunction (UART Connector G6.4.2)
1Orange5V [VCC]
2PurpleNC (Not Connected)
3BlackGND [Power Ground]
4GreenSpeed Signal
5BrownTorque Signal (Torque Voltage)

Rotation Direction: When viewed from the right spline, the shaft rotates clockwise.

3. Setup and Installation

Proper installation is critical for the optimal performance and longevity of your Bafang torque sensor. Please follow these steps carefully.

3.1 Required Tools

  • Torque wrench
  • Bottom bracket tools (for installation/removal)
  • Thread gauge (for checking bottom bracket threads)
  • Concentricity gauge (for checking bottom bracket concentricity)
  • Cleaning supplies (for bottom bracket threads)
Tools for protective sleeves and locking ring
Specialized tools for installing protective sleeves and the bracket locking ring. (Note: This image is a placeholder for the actual tools from OCR page 12, which are not directly embeddable as separate images. Please refer to the full PDF manual for precise tools.)

3.2 Pre-Installation Checks

  1. Inspect Bottom Bracket:
    • Ensure the internal threads of the bicycle's bottom bracket are free from metal shavings, paint, or burrs. Clean thoroughly if necessary.
    • Verify the bottom bracket internal thread specification is BC1.37" x 24T using a thread gauge.
    • Check the concentricity and flatness of the bottom bracket using a concentricity gauge.
    • Confirm the bottom bracket length meets the required tolerances.
Bottom bracket thread and concentricity check diagrams
Diagrams illustrating bottom bracket thread and concentricity checks. (Note: This image is a placeholder for the actual diagrams from OCR page 13, which are not directly embeddable as separate images. Please refer to the full PDF manual for precise instructions.)

3.3 Installation Steps

  1. Install Left Protective Sleeve: Insert the wave washer, then screw the left protective sleeve into the bottom bracket (non-chainring side). Use a torque wrench to tighten to a maximum of 40 N.m.
  2. Installation of left protective sleeve
    Diagram for installing the left protective sleeve. (Note: This image is a placeholder for the actual diagram from OCR page 14, which is not directly embeddable as a separate image. Please refer to the full PDF manual for precise instructions.)
  3. Insert Torque Body: Carefully thread the sensor cable through the bottom bracket. Then, slide the torque body onto the shaft, ensuring proper alignment with the keyway and that the bearing shoulder is approximately 1.8mm higher than the chainring side.
  4. Insertion of torque body
    Diagram for inserting the torque body. (Note: This image is a placeholder for the actual diagram from OCR page 14, which is not directly embeddable as a separate image. Please refer to the full PDF manual for precise instructions.)
  5. Install Right Protective Sleeve: Screw the right protective sleeve into the bottom bracket (chainring side). Use a torque wrench to tighten to a maximum of 40 N.m.
  6. Installation of right protective sleeve
    Diagram for installing the right protective sleeve. (Note: This image is a placeholder for the actual diagram from OCR page 14, which is not directly embeddable as a separate image. Please refer to the full PDF manual for precise instructions.)
  7. Install Cable Outlet Protective Ring: Insert the cable outlet protective ring into the bottom bracket's cable outlet.
  8. Installation of cable outlet protective ring
    Diagram for installing the cable outlet protective ring. (Note: This image is a placeholder for the actual diagram from OCR page 15, which is not directly embeddable as a separate image. Please refer to the full PDF manual for precise instructions.)
  9. Install Chainring Assembly: Align the splines of the chainring assembly with the splines on the sensor sleeve and gently push it into place.
  10. Installation of chainring assembly
    Diagram for installing the chainring assembly. (Note: This image is a placeholder for the actual diagram from OCR page 15, which is not directly embeddable as a separate image. Please refer to the full PDF manual for precise instructions.)
  11. Install Bracket Locking Ring: Screw the bracket locking ring onto the outer thread of the torque body. Use a torque wrench to tighten to a maximum of 35 N.m.
  12. Installation of bracket locking ring
    Diagram for installing the bracket locking ring. (Note: This image is a placeholder for the actual diagram from OCR page 15, which is not directly embeddable as a separate image. Please refer to the full PDF manual for precise instructions.)

The sensor package includes an outlet protective ring (SR PA01.32.ST20) and a bracket locking ring (SR PA212.32.ST09 QPQ). Chainring and locking screw components are not included and must be sourced separately by the customer.

4. Operating Instructions

The Bafang torque sensor operates by detecting the force applied to the pedals and the rotational speed of the bottom bracket. This data is then transmitted to the e-bike controller, which calculates the appropriate motor assistance level. The system provides proportional assist based on your pedaling effort, offering a natural and intuitive riding experience.

Ensure all connections are secure and the sensor is correctly installed before operating your e-bike. The sensor is designed to work seamlessly with compatible e-bike systems, providing real-time feedback for optimal performance.

Video: Bafang Torque Sensor product overview and demonstration.

5. Maintenance

Regular maintenance ensures the longevity and reliable performance of your torque sensor.

5.1 General Care

  • Keep the sensor clean and free from dirt, dust, and debris.
  • Periodically check all connections for tightness and ensure cables are not pinched or damaged.
  • Avoid exposing the sensor to harsh chemicals or solvents.

5.2 Storage

When not in use, store the sensor in a ventilated and dry environment. Avoid damp, acidic, or alkaline conditions. Keep away from strong magnetic objects, as these can interfere with the sensor's operation.

5.3 Environmental Conditions

The sensor is designed to operate within specific environmental parameters. Avoid using or storing the sensor outside of the specified temperature and humidity ranges. Ensure the operating environment is free from severely corrosive gases or media that could affect electrical insulation.

5.4 Anti-Corrosion Performance

The sensor has undergone salt spray testing (5% NaCl solution at 35.5℃ salt spray temperature, 37.5℃ saturated barrel temperature, continuous spray for 72 hours) and meets anti-corrosion standards. However, prolonged exposure to corrosive environments should still be avoided.

6. Troubleshooting

If you encounter issues with your Bafang torque sensor, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Sensor not responding / No assistLoose or disconnected wiring; Incorrect installation; Controller issue.Check all cable connections to the sensor and controller. Ensure the sensor is correctly installed and tightened. Verify power supply to the e-bike system.
Inaccurate or inconsistent assistImproper installation; Magnetic interference; Sensor damage.Re-check installation steps, especially torque values and alignment. Ensure no strong magnetic objects are near the sensor. If issues persist, the sensor may be damaged.
Cable breakageImproper installation or routing; External damage.Ensure cables are routed without sharp bends or pinching. Avoid knocking the sensor during transport or installation. Replace damaged cables.
Water ingressOperating in deep water; Damaged seals.Avoid wading or immersing the sensor in water during operation. Check for any visible damage to seals.

If troubleshooting steps do not resolve the issue, please consult a qualified e-bike technician or contact Bafang customer support.

7. User Tips

  • Bottom Bracket Compatibility: As noted, the 73mm and 68mm bottom bracket specifications are compatible. If your bike requires a 68mm bottom bracket, selecting the 73mm sensor will include two 2.5mm washers to ensure a correct fit.
  • CAN Bus Version: The PA261.32.ST.C 12 model specifically refers to the CAN Bus version of the sensor. Ensure compatibility with your e-bike's controller system.
  • Transfer Cable: If your setup requires a CAN connector type, a transfer cable may be necessary and can be supplied.
  • Axle Length: The axle length varies by specific model (e.g., SR PA222.32.ST, SR PA232.32.ST). Always refer to the detailed specifications table in the full PDF manual to ensure the correct axle length for your bicycle.
  • Included Components: The sensor typically comes with an outlet protective ring and a bracket locking ring. Adjustment rings and safety rings (washers) may be included for specific compatibility needs.

8. Warranty and Support

This Bafang Torque Sensor comes with a 1-Year Warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use conditions.

For detailed warranty terms, technical support, or service inquiries, please contact your authorized Bafang dealer or the official Bafang customer service channel. Please have your product model and serial number ready when contacting support.

Disclaimer: Overloading the sensor for extended periods during use is not recommended and may void the warranty.

For a comprehensive guide, including detailed diagrams and technical data, please refer to the official user manual PDF: Download User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.