GVDA GVDA SPPS-C Series

Contents

GVDA SPPS-C Series Adjustable DC Regulated Power Supply

User Manual

1. Introduction

The GVDA SPPS-C Series is a miniature switching DC power supply designed for laboratory, educational, and industrial applications. It offers precise control and adjustment of both output voltage and current. The front panel features a high-precision three-window LED digital display, allowing users to simultaneously monitor voltage, current, and power output, providing clear and intuitive feedback on the device's operational status and parameters.

2. Safety Instructions

  • Always connect the power supply to a properly grounded electrical outlet.
  • Do not operate the device in wet or damp conditions, or near flammable gases or vapors.
  • Ensure adequate ventilation around the unit to prevent overheating. Do not block ventilation openings.
  • Do not open the casing of the power supply. There are no user-serviceable parts inside, and doing so may expose you to dangerous voltages.
  • Use only the provided power cord and output load cords.
  • Disconnect power before making any connections or adjustments to the output terminals.
  • In case of smoke, unusual odors, or abnormal operation, immediately turn off the power switch and disconnect the power cord.

3. Product Overview

3.1. Panel Instructions

Refer to the diagram below for an overview of the front panel components and their functions:

GVDA SPPS-C Series DC Power Supply Front Panel Diagram
Figure 1: Front Panel Layout and Components
  1. Output Voltage Display: Shows the current output voltage.
  2. Output Current Display: Shows the current output current.
  3. Output Power Display: Shows the current output power.
  4. Constant Voltage Indicator (C.V): Illuminates when the power supply is operating in constant voltage mode.
  5. Constant Current Indicator (C.C): Illuminates when the power supply is operating in constant current mode.
  6. Voltage Adjust Knob: Used to adjust the output voltage. Press down to select the cursor position for fine adjustment.
  7. Current Adjust Knob: Used to adjust the output current. Press down to select the cursor position for fine adjustment.
  8. Power Switch: Main power ON/OFF switch for the unit.
  9. USB Charging Socket (5V/2A): Provides a 5V, 2A USB output for charging devices.
  10. Output Button (ON/OFF): Toggles the main DC output ON or OFF.
  11. + Positive Polarity (Red): Positive output terminal.
  12. Grounding (Green): Ground terminal.
  13. - Negative Polarity (Black): Negative output terminal.
  14. Cooling Fan: Provides cooling for the internal components.
  15. Power Socket: AC power input socket.
  16. Fuse Box: Contains the protective fuse for the unit.

4. Specifications

ParameterValue
Output VoltageDC 0-30V / 0-60V / 0-120V (model dependent)
Output CurrentDC 0-3A / 0-5A / 0-10A (model dependent)
AC Input Voltage230V±10% 50Hz (also supports 115V±10% 60Hz)
Working Temperature0℃ ~ 40℃, relative humidity <80%RH
Storage Temperature-10℃ ~ 70℃, relative humidity <70%RH
Voltage Stability (Constant Voltage)≤0.1% + 3mV
Low Voltage (Constant Voltage)0.2~0.3% + 3mV
Load Stability (Constant Voltage)≤0.5% + 3mV
Ripple Noise (Constant Voltage)≤30mVrms
Current Stability (Constant Current)≤0.2% + 3mA
Load Stability (Constant Current)≤0.2% + 3mA
Ripple Noise (Constant Current)≤20mArms (valid value)
Accuracy0.5% + 2 digits
ResolutionVoltage 0.01V, Current 0.001A
Fuse Standard3A (AC 220V input)
Product Size215mm (L) * 155mm (W) * 85mm (H)
Product Weight1.2kg
Package Weight1.7kg

4.1. Model Specific Specifications

The SPPS-C series includes various models with different output ranges:

ModelOutput Voltage (V)Output Current (A)AC 115V Input FuseAC 230V Input Fuse
SPPS-C3050~30V0~5A5A3A
SPPS-C30100~30V0~10A5A3A
SPPS-C6050~60V0~5A5A3A
SPPS-C12030~120V0~3A5A3A

5. Setup

5.1. Unpacking and Inspection

Upon receiving your GVDA DC Power Supply, carefully unpack all components and inspect for any signs of damage. The package should contain:

  • 1 x GVDA DC Power Supply Unit
  • 1 x Power Cord
  • 1 x Output Load Cord (with alligator clips)
  • 1 x User Manual (PDF version available at PDF Manual)
GVDA DC Power Supply Package Contents
Figure 2: Package Contents

5.2. Connecting Power

  1. Ensure the power switch (8) on the front panel is in the OFF position.
  2. Connect the provided power cord to the power socket (15) on the rear of the unit.
  3. Plug the other end of the power cord into a suitable grounded AC electrical outlet (230V±10% 50Hz or 115V±10% 60Hz, depending on your region and unit model).

5.3. Connecting Output Load

  1. Connect the red lead of the output load cord to the positive (+) terminal (11).
  2. Connect the black lead of the output load cord to the negative (-) terminal (13).
  3. If grounding is required for your application, connect the green lead to the GND terminal (12).
  4. Connect the other end of the output load cord (alligator clips) to your device or circuit, ensuring correct polarity.

6. Operating Instructions

How to use GVDA DC Power Supply
Figure 3: Basic Operation Steps
  1. Power On: Turn on the main power switch (8) on the front panel. The LED display will illuminate.
  2. Adjust Voltage and Current: Use the Voltage Adjust Knob (6) and Current Adjust Knob (7) to set the desired output voltage and current limits. Pressing down on these knobs allows you to select the cursor position for more accurate, fine adjustments. The display will show the set values.
  3. Start Output: Once voltage and current are set, press the Output ON/OFF button (10) to enable the DC output. The C.V or C.C indicator will light up, showing the operating mode.
  4. USB Charging: The unit includes a 5V/2A USB charging socket (9) for convenient charging of compatible devices.

6.1. Adjusting Current Without Load (Presetting Current Limit)

To accurately set the current limit before connecting a sensitive load, follow these steps:

Adjusting Current Without Load Diagram
Figure 4: Procedure for Adjusting Current Without Load
  1. Adjust the voltage to below 5V using the Voltage Adjust Knob (6).
  2. Let the positive (+) and negative (-) output terminals of the output line touch (short circuit them).
  3. Now, adjust the Current Adjust Knob (7) to set your desired current limit. The unit will enter Constant Current (C.C) mode, and the display will show the set current.
  4. Once the current is set, remove the short circuit and proceed with connecting your load.

7. Applications

The GVDA SPPS-C Series DC Power Supply is versatile and suitable for a wide range of applications, including:

GVDA DC Power Supply Applications
Figure 5: Common Applications
  • Laboratory Use: Powering experimental circuits and devices.
  • Computer Repair: Testing components and diagnosing power-related issues.
  • Cell Phone Repair: Providing stable power for mobile device diagnostics and repair.
  • Electronic Equipment Production: Quality control and testing during manufacturing.
  • Aging Products: Stress testing electronic components and products.
  • Battery Charging: Providing regulated power for charging various battery types (ensure compatibility and safety protocols).
  • Scientific Research and Teaching: Educational demonstrations and research projects requiring precise power control.

8. Troubleshooting

  • No Power / Unit Does Not Turn On:
    • Check if the power cord is securely connected to both the unit and the electrical outlet.
    • Ensure the main power switch (8) is in the ON position.
    • Inspect the fuse in the fuse box (16) on the rear panel. If blown, replace it with a fuse of the correct rating (3A for AC 220V input).
  • No Output Voltage/Current:
    • Ensure the Output ON/OFF button (10) is pressed to enable the output.
    • Check that the output load cords are correctly connected to the terminals and the load.
    • Verify that the voltage and current limits are set above zero.
  • Output Voltage/Current Readings Are Incorrect:
    • Ensure all connections are secure and free from corrosion.
    • Check the integrity of the output load cords.
    • If possible, test with a known good multimeter to verify the readings.
  • Overload Protection Activated (Output Shuts Off):
    • The unit has overload protection. If the load draws more current than the set limit, the output may shut off or enter constant current mode.
    • Reduce the load or increase the current limit (if safe for your application) and then re-enable the output.

9. User Tips

  • Precise Adjustment: For very fine adjustments of voltage or current, press down on the respective knob (Voltage Adjust Knob (6) or Current Adjust Knob (7)) to activate cursor selection. This allows you to adjust individual digits for greater precision.
  • Model Differences: Be aware that different models within the SPPS-C series (e.g., SPPS-C305, SPPS-C3010, SPPS-C605, SPPS-C1203) have varying maximum output voltage and current capabilities. Always refer to the specifications table (Section 4) for your specific model to ensure it meets your application requirements.
  • Quiet Operation: The power supply features a temperature-controlled fan, which helps maintain low noise levels during operation, especially at lower loads.

10. Maintenance

  • Cleaning: Keep the unit clean and free from dust. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
  • Ventilation: Regularly check that the cooling fan (14) and ventilation openings are not obstructed to ensure proper airflow and prevent overheating.
  • Fuse Replacement: If the fuse blows, replace it only with a fuse of the same type and rating as specified in the specifications (3A for AC 220V input). Incorrect fuse replacement can damage the unit or pose a fire hazard.
  • Storage: When not in use for extended periods, store the power supply in a cool, dry place, away from direct sunlight and extreme temperatures.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your seller. A detailed user manual in PDF format is available for download at GVDA SPPS-C Series User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.