OWLLON STK8039

Contents

OWLLON STK-8039 Wireless Game Controller User Manual

Model: STK8039 | Brand: OWLLON

1. Introduction

Thank you for purchasing the OWLLON STK-8039 RGB Light Wireless Game Controller. This versatile gamepad is designed to enhance your gaming experience across multiple platforms, including PlayStation 4, Nintendo Switch, PC, Android, and iOS devices. Featuring vibrant RGB lighting, dual motor vibration, Turbo function, Macro programming, and 6-axis gyro support, the STK-8039 offers precise control and immersive feedback. Please read this manual carefully to ensure proper setup and operation.

OWLLON STK-8039 Wireless Game Controller with phone mount
STK-8039 Wireless Game Controller with phone attached.

2. Safety Information

  • Keep the controller away from water and other liquids.
  • Do not expose the controller to extreme temperatures or direct sunlight.
  • Avoid dropping or subjecting the controller to strong impacts.
  • Do not attempt to disassemble or modify the controller, as this will void the warranty and may cause damage.
  • Use only the provided charging cable or a certified equivalent.
  • Keep out of reach of small children.

3. Package Contents

Please check the package contents upon unboxing:

  • OWLLON STK-8039 Wireless Game Controller
  • USB Charging Cable
  • User Manual (this document)
  • Phone Holder (pre-attached or separate)

4. Product Overview

The STK-8039 controller features a transparent design with integrated RGB lighting, ergonomic grips, and a detachable phone holder for mobile gaming. Key components include:

  • Analog Sticks: Left and Right for movement and camera control.
  • D-Pad: Directional input.
  • Action Buttons: A, B, X, Y.
  • Shoulder Buttons: L1, R1.
  • Triggers: L2, R2.
  • Function Buttons: SELECT, START, TURBO, HOME.
  • Macro Buttons: M1, M2 (on the back).
  • USB-C Port: For charging and wired connection.
  • LED Indicators: For connection status, charging, and battery level.
Detailed diagram of STK-8039 controller features and connection methods
Detailed overview of the STK-8039 controller and its features.

5. Specifications

FeatureDetail
Model NumberSTK8039
Brand NameOWLLON
TypeGamepads
Interface TypeBluetooth
Compatible PlatformsNintendo Switch, PlayStation (PS4), PC, Android, iOS
Battery IncludedYes (600mAh)
Playtime10-12 hours (approx.)
Charging Time2-3 hours (approx.)
Special FeaturesRGB Light, Vibration, Turbo, Macro Programming, 6-Axis Gyro (Switch)
Phone HolderAdjustable, fits phones up to 6.5 inches
OriginMainland China

6. Setup

6.1 Initial Charging

Before first use, fully charge the controller. Connect the provided USB charging cable to the controller's USB-C port and to a power source (e.g., computer USB port, USB wall adapter). The LED indicator will blink during charging and become solid when fully charged.

6.2 Attaching the Phone Holder

If your phone holder is separate, carefully attach it to the top of the controller. Ensure it is securely fastened before placing your smartphone in it. The holder is adjustable to accommodate various phone sizes up to 6.5 inches.

6.3 Connecting to Devices

The STK-8039 supports both wireless (Bluetooth) and wired (USB) connections depending on the platform.

6.3.1 Nintendo Switch (Wireless)

  1. On your Nintendo Switch, go to 'Controllers' > 'Change Grip/Order'.
  2. Press and hold the Y + HOME buttons on the STK-8039 controller for 3 seconds. The LED indicators will flash quickly.
  3. Once the controller appears on the Switch screen, select it to pair. The LED will become solid when connected.
STK-8039 controller connected to a Nintendo Switch console
Controller paired with a Nintendo Switch.

6.3.2 Android Devices (Wireless)

  1. Enable Bluetooth on your Android device (Android 6.0+ required).
  2. Press and hold the A + HOME buttons on the STK-8039 controller for 3 seconds. The LED indicators will flash quickly.
  3. In your device's Bluetooth settings, search for and select the controller to pair. The LED will become solid when connected.

6.3.3 iOS Devices (Wireless)

  1. Enable Bluetooth on your iOS device (iOS 13.0+ required).
  2. Press and hold the B + HOME buttons on the STK-8039 controller for 3 seconds. The LED indicators will flash quickly.
  3. In your device's Bluetooth settings, search for and select the controller to pair. The LED will become solid when connected.

6.3.4 PC (Wired)

Connect the controller to your PC using the USB charging cable. The controller should be automatically recognized as a gamepad. Supports Windows 7/8/10/11.

STK-8039 controller connected to a laptop
Controller connected to a PC via USB or Bluetooth.

6.3.5 PC (Wireless)

  1. Ensure your PC has Bluetooth enabled.
  2. Press and hold the X + HOME buttons on the STK-8039 controller for 3 seconds. The LED indicators will flash quickly.
  3. In your PC's Bluetooth settings, search for and select the controller to pair. The LED will become solid when connected.

6.3.6 PlayStation 4 (Wired)

Connect the controller to your PS4 console using the USB charging cable. The controller will be recognized and can be used for gameplay. Supports PS4, PS4 Slim, PS4 Pro.

STK-8039 controller connected to a gaming monitor
Controller connected to a gaming setup.

7. Operating Instructions

7.1 RGB Light Modes

The controller features customizable RGB lighting with 7 colors and 3 modes:

  • Breathing Mode: Colors cycle smoothly.
  • Static Mode: A single color is displayed.
  • Off: Lights are turned off.

Refer to the product's detailed diagram (Image 4 in Product Overview) for specific button combinations to cycle through modes or colors.

7.2 Turbo Function

The Turbo function allows for rapid, repeated input of a button press without continuously pressing it.

  1. Activate Turbo: Press and hold the TURBO button, then press the desired action button (A/B/X/Y/L1/R1/L2/R2). The LED will flash to confirm activation.
  2. Adjust Turbo Speed: While holding TURBO, press the D-pad Up to increase the turbo speed or D-pad Down to decrease it.
  3. Deactivate Turbo: Press and hold the TURBO button, then press the same action button again.

7.3 Macro Programming (M1/M2 Buttons)

The M1 and M2 buttons on the back of the controller can be programmed to execute a sequence of button presses (macros).

  1. Enter Programming Mode: Press and hold either M1 or M2, then press the SET button. The LED will flash, indicating programming mode.
  2. Record Macro: Press the sequence of buttons you wish to record (e.g., A, B, X, Y).
  3. Save Macro: Press the same M1 or M2 button again to save the macro. The LED will stop flashing.
  4. Execute Macro: Press the programmed M1 or M2 button during gameplay to execute the recorded sequence.
  5. Clear Macro: Press and hold the M1 or M2 button, then press the SET button for 3 seconds. The LED will flash and then turn off, indicating the macro has been cleared.

7.4 Vibration Feedback

The controller features dual motor vibration for immersive haptic feedback during gameplay. This feature is automatically enabled when supported by the game and platform.

7.5 6-Axis Gyro (Nintendo Switch Only)

For Nintendo Switch games that support motion controls, the built-in 6-axis gyroscope provides precise motion sensing. This feature is automatically enabled when connected to a Nintendo Switch console.

7.6 Sleep Mode

To conserve battery, the controller will automatically enter sleep mode after 5 minutes of inactivity. To wake the controller, press the HOME button.

8. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the controller. Do not use abrasive cleaners or solvents.
  • Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the controller regularly, even if not in use for extended periods.

9. Troubleshooting

9.1 Controller Not Connecting

  • Ensure the controller is fully charged.
  • Verify you are using the correct button combination for the desired platform (e.g., Y+HOME for Switch, A+HOME for Android).
  • Make sure Bluetooth is enabled on your device and the controller is in pairing mode (LED flashing quickly).
  • Try forgetting the device in your Bluetooth settings and re-pairing.
  • For PC/PS4, ensure the USB cable is securely connected.

9.2 Buttons Not Responding

  • Check if the controller is properly connected to your device.
  • Restart the controller and your gaming device.
  • Ensure the game you are playing supports external controllers.

9.3 Lag or Disconnection Issues

  • Ensure there are no obstructions between the controller and your device.
  • Move closer to your device to reduce interference.
  • Avoid using the controller near other strong wireless signals.
  • Ensure the controller's battery is not critically low.

9.4 RGB Lights Not Working

  • Check the RGB light mode settings as described in section 7.1.
  • Ensure the controller has sufficient battery charge.

10. User Tips

  • For optimal mobile gaming, ensure your phone is securely seated in the holder before starting gameplay.
  • Experiment with Turbo speeds for different games to find what works best for rapid-fire actions.
  • Utilize the Macro programming feature for complex button combinations in games that require them, saving time and improving reaction speed.

11. Warranty and Support

The OWLLON STK-8039 Wireless Game Controller comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please contact your retailer or the official OWLLON customer support channel. Please retain your proof of purchase for warranty claims.

Note: This manual is subject to change without prior notice. For the latest version and additional resources, please visit the official product support page.

12. Manufacturing Process

The OWLLON STK-8039 controllers undergo a meticulous manufacturing and quality control process to ensure high performance and durability. This includes assembly, testing, and packaging by skilled technicians.

Video showcasing the manufacturing and assembly process of the game controllers.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.