1. Introduction
The Svbony SV199 Atmospheric Dispersion Corrector (ADC) is an optical device designed to enhance planetary imaging and observation by correcting the dispersive effects of Earth's atmosphere. This manual provides essential information for the proper use and maintenance of your SV199 ADC.
1.1. What is an ADC?
An ADC is an optical device that introduces light dispersion (refraction) into an optical train to nullify the existing dispersion from a celestial object as seen by the observer. This process results in a sharper, color-corrected image. It is particularly crucial for planetary imaging with modern CMOS or CCD cameras, where high sampling resolution makes the negative effects of light dispersion very apparent.
1.2. What is Light Dispersion?
Light dispersion is a phenomenon observed when white light passes through a medium and is separated into its constituent wavelengths. A common example is a rainbow, which is formed by light passing through water droplets acting as prisms. In astronomy, when observing celestial objects from Earth's surface, our atmosphere acts like a prism, decomposing the light into different colors. This leads to slightly shifted and superimposed images in various wavelengths. The thicker the atmosphere, the worse the dispersion. Objects closer to the Zenith (directly overhead) experience less dispersion compared to those near the horizon (where the atmosphere is thicker).

2. Product Overview and Components
The Svbony SV199 ADC is designed for ease of use and high performance, featuring quality optics and a robust build.
2.1. Key Features
- Corrects atmospheric dispersion for enhanced planetary imaging.
- Utilizes 2 high-quality BK7 prisms with 1/λ surface accuracy.
- Full Multi-Coated (FMC) prism lenses for high transmittance, true colors, and reduced glare/ghosting.
- Internal blackened anti-reflective treatment to minimize stray light.
- Equipped with a spirit level and scale ring for precise zero-point adjustment.
- Side screw locking mechanism to reduce observation errors caused by movement or vibration.
- 1.25-inch barrel with T2 external thread for broad compatibility with eyepieces and cameras.
- 4.5-degree range for declination adjustment.

2.2. Components
The SV199 ADC consists of the following main parts:
- Angle Adjustment Ring (1): Used to change the dispersion correction by rotating the internal prisms.
- Angle Ring (3): Can be rotated and fixed using the thumbscrew, serving as a reference for rotation and marked with different angles.
- Angle Ring Thumbscrew (4): Secures the angle ring in position.
- Spirit Level: Integrated for easy identification of the ADC's zero position.
- 1.25-inch Barrel: Inserts into the telescope's focuser.
- T2 External Thread: For attaching cameras or other accessories.

2.3. Package Contents
- 1x Svbony SV199 1.25" Atmospheric Dispersion Corrector
- 1x 1.25" Dust Plug
- 1x 1.25" Dust Cover
- 1x User Manual

3. Setup
Proper setup of the SV199 ADC is crucial for optimal performance. Follow these steps to integrate it into your imaging train.
3.1. Connecting the ADC
- The SV199 ADC features a 1.25-inch barrel on the telescope side and a T2 external thread on the camera/eyepiece side.
- Insert the 1.25-inch barrel of the ADC into your telescope's focuser. Ensure it is securely seated.
- Attach your camera or eyepiece to the T2 external thread of the ADC.

3.2. Initial Alignment and Locking
- Align Handles: Align the handles with the scale line marks for initial positioning.
- Attach ADC to Telescope: Attach the ADC to your telescope, ensuring it is kept parallel to the horizontal axis.
- Side Screw Locking: Use the side screw locking mechanism to firmly secure the ADC in place. This reduces errors from mirror movement or vibration, ensuring better accuracy during observation or imaging.


4. Operation
Operating the SV199 ADC involves adjusting its internal prisms to counteract atmospheric dispersion.
4.1. Adjusting Dispersion Correction
- Rotate the Angle Adjustment Ring (1) to change the dispersion correction. As you do this, the object's position will shift as seen by your camera or eyepiece.
- Make small adjustments to re-center the object in your field of view after rotating the ring.
- The Angle Ring (3) can be rotated and fixed using the Angle Ring Thumbscrew (4). This ring, marked with different angles, serves as a reference for your rotation adjustments.

4.2. Image Shift Compensation
When rotating the prisms, the image will shift. It is recommended to proceed with caution and rotate the prisms slowly. Re-center the object in your field of view to compensate for any image shift whenever necessary.
4.3. Finding ADC Zero with Spirit Level
The integrated spirit level with a scale ring makes finding the ADC's zero position effortless, which is useful for different latitudes and regions.

4.4. Recommended Objects for Use
While theoretically usable for all deep-sky objects, the most noticeable results with the ADC are observed when imaging or observing the Moon, Jupiter, Saturn, and Mars. For Venus, the ADC's effectiveness may vary and depends on the specific filters used.


5. Maintenance
To ensure the longevity and optimal performance of your Svbony SV199 ADC, follow these maintenance guidelines:
- Cleaning Optics: Use a soft, lint-free cloth specifically designed for optical surfaces. For stubborn smudges, use a small amount of optical cleaning solution. Avoid touching the prism surfaces directly with your fingers.
- Dust Protection: Always use the provided dust plug and dust cover when the ADC is not in use to prevent dust accumulation on the optical surfaces.
- Storage: Store the ADC in a dry, cool place, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case to prevent physical damage.
- Avoid Disassembly: Do not attempt to disassemble the ADC. This can void the warranty and may damage the precision optical components.
6. Troubleshooting
If you encounter issues with your SV199 ADC, consider the following:
- Image Quality Issues (Chromatic Aberration): Ensure the ADC is correctly aligned and adjusted. Rotate the angle adjustment ring slowly while observing the image to find the optimal correction point.
- Image Shift: It is normal for the image to shift slightly when adjusting the prisms. Re-center your target in the field of view after making adjustments.
- No Improvement in Image: Verify that the ADC is properly installed in the optical train and that your telescope and camera are correctly focused. Ensure you are observing an object where atmospheric dispersion is significant (e.g., planets at lower altitudes).
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | SV199 |
| Type | Monocular Atmospheric Dispersion Corrector |
| Optical Aperture | 24mm |
| Substrate | BK7 |
| Lateral Surface | Blackened for improved contrast |
| Coatings | Anti-Reflective Broad-Band (300nm-700nm) |
| Wedge Angle | 4.5° |
| Spirit Level | 1PCS |
| Required Back-focus | 56.6mm |
| Net Weight | 167g |
| Package Dimensions (L x W x H) | 10cm x 5cm x 5cm |
| Package Weight | 0.28kg |
7.1. Prism Transmission Graph
The prism transmission graph (Figure 12) illustrates the broad-band anti-reflective coatings, showing high transmission efficiency across the visible spectrum (300nm-700nm), which is crucial for accurate color correction and bright images.

8. User Tips
- Slow Adjustments: When adjusting the angle rings to correct dispersion, rotate the prisms slowly and carefully. This allows you to observe the subtle changes in the image and find the optimal setting without overshooting.
- Re-centering: Always re-center your celestial target after making any significant adjustments to the ADC's prisms, as rotation can cause the image to shift in the field of view.
- Planetary Focus: The SV199 ADC is most effective for planetary and lunar observations, especially when objects are at lower altitudes where atmospheric dispersion is more pronounced.
- Package Contents: The product includes one SV199 ADC unit, a 1.25" dust plug, a 1.25" dust cover, and a user manual.
9. Safety and Compliance
Please read this guide carefully before using the device. It contains important operating instructions for safe usage and compliance with applicable standards and regulations.
9.1. FCC Requirements
Products authorized under Part 15 using SDoC or Certification require a label containing one of the following compliance statements:
- Receivers associated with licensed device service operations: This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.
- Stand-alone cable input selector switch: This device complies with part 15 of the FCC Rules for use with cable television service.
- All other devices: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
9.2. CE Requirements
Hong Kong Svbony Technology Co., Ltd declares that the equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/30/EU and the ROHS Directive 2011/65/EU. The full text of the EU declaration of conformity is available at www.svbony.com.
9.3. Disposal
The crossed-out wheeled-bin symbol on your product, literature, or packaging indicates that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.
9.4. IC Requirements
CAN ICES-3(B)/NMB-3(B)
9.5. Avoid Choking Hazard
This product contains small parts and is not suitable for children under 3 years.
9.6. Approved Accessories
This device meets regulatory standards when used with Svbony accessories supplied or designated for the product. For a list of Svbony-approved accessories, visit http://www.svbony.com.
10. Warranty and Support
10.1. Warranty Information
Most new Svbony products carry a one-year manufacturer's warranty from the date of purchase. Please retain your guarantee card and proof of purchase for any warranty claims.
Exclusions from Warranty Coverage:
- Damage caused by accident.
- Misuse or abuse of the product, or unauthorized alterations or repairs.
- If the serial number has been altered, defaced, or removed.
10.2. Customer Support
For support, please contact Svbony customer service:
- Website: http://www.svbony.com
- Email: info@svbony.jp
- User Manual PDF: A detailed user manual in PDF format is available for download here.