DemonFX CALL76

Contents

DemonFX Call76 Compact Bass Guitar Compressor Pedal

Model: CALL76

Introduction

The DemonFX Call76 is a compact, studio-grade FET compressor pedal designed specifically for bass guitar, though it can also be used with other instruments. It features a 100% Class-A discrete signal path, ultra-fast FET response, and a studio-grade discrete-transistor preamp. The pedal offers dedicated controls for parallel compression (Dry Blend) and a variable-frequency sidechain filter (HPF), allowing for precise dynamic control and tone shaping. Its robust zinc alloy casing ensures durability.

Package Contents

  • DemonFX Call76 Compact Bass Compressor Pedal
  • User Manual (this document)

Note: Power supply is not included.

Setup

  1. Power Connection: Connect a 9-18V DC power adapter (center negative) to the '9-18VDC' input jack on the pedal. The pedal requires 78mA at 9V or 103mA at 18V. Ensure the power supply meets these specifications for optimal performance.
  2. Instrument Input: Connect your bass guitar (or other instrument) to the 'INSTR' input jack on the right side of the pedal using a standard 1/4-inch instrument cable.
  3. Amplifier Output: Connect the 'AMP' output jack on the left side of the pedal to your amplifier's input using a standard 1/4-inch instrument cable.
  4. Bypass Footswitch: The large footswitch labeled 'ON' engages or bypasses the effect. When the effect is engaged, the LED indicator will illuminate.
Angled view of DemonFX Call76 pedal showing input, output, and power jacks.
Figure 1: Pedal connections (Input, Output, Power)

Operating the Pedal

The Call76 features six control knobs to shape your compressed tone:

Diagram showing the layout and function of each control knob on the DemonFX Call76 pedal.
Figure 2: Control layout and functions
  • DRY: This control determines the level of your original, uncompressed signal that is blended with the compressed signal. Turning it clockwise increases the dry signal. This allows for parallel compression, preserving the natural attack and dynamics of your instrument while adding sustain and consistency from the compressed signal.
  • RATIO: Adjusts the compression ratio. Turning it clockwise increases the amount of gain reduction applied for a given increase in input signal. Lower settings provide more transparent compression, while higher settings deliver more aggressive compression with a highly controlled dynamic range.
  • ATT/REL (Attack/Release): This combined control adjusts both the attack and release parameters of the compressor. Turning the knob clockwise reduces the release time and increases the attack time, which is ideal for percussive playing. Turning it counter-clockwise increases the release time and reduces the attack time for a smoother, more 'spongy' feel. This control is designed to avoid nasty distortions and frequency-dependent artifacts often associated with separate attack/release controls.
  • OUT: This is the master output level control for the pedal. Adjust it to match the volume of your bypassed signal or to boost your signal.
  • IN: This is the input gain control. It sets the level of the signal entering the compressor circuit. Higher settings will result in more compression.
  • HPF (High-Pass Filter): This knob controls the cut-off frequency of a high-pass filter positioned in the compressor's sidechain. By removing low frequencies from the sidechain, it prevents the compressor from overreacting to bass frequencies, making the compression more consistent and natural, especially for bass guitars.

Engaging the Effect: Press the 'ON' footswitch to toggle the effect on or off. The LED indicator will light up when the effect is active.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the pedal's surface. Avoid using abrasive cleaners or solvents, as they may damage the finish.
  • Storage: Store the pedal in a cool, dry place away from direct sunlight and extreme temperatures. Disconnect the power supply when not in use for extended periods.
  • Durability: The pedal features a durable zinc alloy enclosure, designed to withstand regular use.

Troubleshooting

ProblemPossible CauseSolution
No sound when pedal is engaged.Incorrect cable connections, power issue, 'OUT' knob set too low, 'IN' knob set too low.Check all cable connections. Ensure power supply is connected and functional. Increase 'OUT' and 'IN' knob settings.
Distorted or undesirable sound.Input signal too hot, extreme 'RATIO' or 'ATT/REL' settings, incorrect HPF setting.Reduce the 'IN' knob setting. Experiment with 'RATIO' and 'ATT/REL' settings. Adjust the 'HPF' knob to filter out unwanted low frequencies from the sidechain.
Pedal does not power on.Incorrect power supply, faulty power cable, power outlet issue.Verify power supply is 9-18V DC (center negative) and meets current requirements. Try a different power cable or outlet.

Specifications

FeatureDetail
ModelCALL76
TypeCompact Bass Compressor Effect Pedal
Circuitry100% Class-A discrete signal path, FET response, discrete-transistor preamp
ControlsDRY, RATIO, ATT/REL, OUT, IN, HPF
Power Requirements9-18V DC (center negative)
Current Draw78mA @ 9V / 103mA @ 18V
MaterialZinc Alloy
Input ImpedanceUltra-high
Frequency ResponseUltra-wide
SwitchingSilent switching, high-quality signal-conditioning bypass mode
OriginMainland China (Designed in England)
Dimensions (approx.)13 cm (L) x 9 cm (W) x 7 cm (H)
Weight (approx.)0.45 kg

User Tips

  • Experiment with Dry Blend: The 'DRY' knob is crucial for achieving a natural sound. Start with it at 12 o'clock and adjust to find the perfect balance between your raw and compressed tones. This allows for parallel compression, which can add punch and sustain without completely squashing your dynamics.
  • Utilize the HPF: For bass players, the 'HPF' control is invaluable. By filtering low frequencies from the compressor's detection circuit, you can prevent the pedal from overreacting to deep bass notes, resulting in smoother, more consistent compression.
  • Attack/Release Sweet Spot: The combined 'ATT/REL' knob simplifies finding the right attack and release times. For percussive playing (slap bass), try turning it clockwise. For a smoother, more sustained sound, turn it counter-clockwise.
  • Gain Staging: Use the 'IN' knob to control how much signal hits the compressor. Higher 'IN' settings will result in more compression. Always balance this with the 'OUT' knob to maintain consistent volume levels.

Warranty and Support

DemonFX products are designed for quality and reliability. For any warranty claims or technical support, please contact the manufacturer directly. Keep your proof of purchase for warranty validation.

Contact Information:

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.