1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your TEKA metal fume hood filter. Designed for optimal performance in your kitchen range hood, this filter ensures efficient grease and odor removal. Please read this manual thoroughly before installation and keep it for future reference.
2. Product Overview
The TEKA metal fume hood filter is a crucial component for maintaining the efficiency and cleanliness of your range hood. It is designed to capture grease particles from cooking fumes, preventing them from accumulating in the exhaust system and on kitchen surfaces. This filter is compatible with various TEKA range hood models, including but not limited to:
- TEKA CNL2002
- TEKA CNL1 2002
- TEKA CML-2002VR01
- TEKA C NL INOX 6610
- TEKA CNL1-1001
- TEKA CNL1-2002
- TEKA CNL1001
- TEKA CNL 1001
- TEKA CNL11001I
- TEKA CNL2002 VR02
- TEKA CNL2002INOX
- TEKA CNL2002VR01
- TEKA CNL3000
- TEKA C-622325
- TEKA CNL 1001 INOX VR01
- TEKA CNL 2002 INOX VR00
- TEKA CNL 2002 VR01 INOX
- TEKA CNL 3000 INOX
- TEKA CNL 3000 INOX VR01
- TEKA CNL 3000 INOX VR02
- TEKA CNL 3000 INOX VR03
- TEKA CNL 6610 INOX VR00
- TEKA CNL 6610 INOX VR01
- TEKA CNL 6610 INOX VR02
- TEKA INOX CNL-1001
- TEKA CNL-1001-110V60HZ-062
- TEKA CNL-1001-238
- TEKA CNL-1001/2002
- TEKA CNL-1001INOX-110V60HZ
- TEKA CNL-2002-110V60HZ-062
- TEKA CNL-2002-238
- TEKA CNL-2002INOX-110V60HZ
- TEKA CNL-3000INOX-0628
- TEKA CNL1 3000 INOX VR00
- TEKA CNL1-2002 VR00 WHITE
- TEKA CNX 6000 INOX
- TEKA CNX 6000 INOX VR01
- TEKA CNX 6000 INOX VR02
- TEKA EDIP600W-302
Please verify your specific range hood model for compatibility.
3. Specifications
| Feature | Specification |
|---|---|
| Product Type | Metal Fume Hood Filter (Range Hood Part) |
| Brand | Teka |
| Model Number | 61836020 |
| Dimensions (Length x Width) | 547 mm x 209 mm |
| Material | Metal |
4. Setup and Installation
Before beginning installation, ensure your range hood is turned off and disconnected from the power supply to prevent electrical hazards.
- Remove Old Filter: Locate the existing filter(s) in your range hood. Most filters are held in place by small latches or clips. Gently push or pull the latch to release the filter. Carefully slide out the old filter.
- Inspect Range Hood: While the old filter is out, take the opportunity to clean any grease buildup inside the filter housing or surrounding areas of the range hood.
- Insert New Filter: Align the new TEKA metal fume hood filter with the filter slot in your range hood. Ensure the filter is oriented correctly (usually with the latch mechanism facing outwards or downwards for easy access).
- Secure Filter: Slide the new filter into place until it clicks or locks securely with the latches. Gently tug on the filter to ensure it is firmly seated and will not fall during operation.
- Restore Power: Once the new filter is securely installed, reconnect your range hood to the power supply.
5. Operating Instructions
The TEKA metal fume hood filter operates passively as part of your range hood's ventilation system. Once correctly installed, it will effectively capture grease and other airborne particles during cooking. Ensure your range hood fan is operating at an appropriate speed for the cooking task to maximize filtration efficiency.
6. Maintenance
Regular cleaning of your metal fume hood filter is essential for maintaining optimal performance and extending its lifespan. A dirty filter can reduce airflow, decrease grease capture efficiency, and increase fire risk.
- Cleaning Frequency: It is recommended to clean the metal filter every 3-6 weeks, depending on your cooking habits. For heavy cooking, more frequent cleaning may be necessary.
- Removal: Turn off and unplug the range hood. Release the latches and carefully remove the filter as described in the 'Setup and Installation' section.
- Cleaning Method:
- Hand Washing: Soak the filter in hot water with a degreasing dish soap for at least 30 minutes. Use a non-abrasive brush to gently scrub away any remaining grease. Rinse thoroughly with clean water.
- Dishwasher: Many metal filters are dishwasher safe. Place the filter in the dishwasher, preferably on a hot cycle with a strong detergent. Avoid placing it with delicate items.
- Drying: Allow the filter to air dry completely before re-installing it into the range hood. Ensure no water droplets remain, as this could lead to corrosion or affect electrical components if not fully dry.
- Re-installation: Re-install the clean, dry filter following the steps in the 'Setup and Installation' section.
7. Troubleshooting
If you experience issues with your fume hood's filtration, consider the following common troubleshooting steps related to the filter:
- Reduced Airflow/Poor Suction:
- Cause: Clogged filter due to grease buildup.
- Solution: Clean the filter thoroughly as per the maintenance instructions. If the filter is damaged or excessively worn, consider replacing it.
- Rattling Noise from Filter Area:
- Cause: Filter not properly seated or latched.
- Solution: Remove and re-install the filter, ensuring it is securely locked into place with all latches engaged.
- Persistent Odors/Grease Buildup:
- Cause: Filter may be damaged, worn out, or not cleaned frequently enough.
- Solution: Increase cleaning frequency. Inspect the filter for any tears or damage to the mesh; if found, replace the filter. Ensure the range hood fan is operating correctly.
8. User Tips
No specific user tips from reviews or Q&A are available for this product at this time.
9. Warranty and Support
For warranty information or technical support regarding your TEKA metal fume hood filter, please refer to the documentation provided with your TEKA range hood or contact the original seller or TEKA customer service directly. Keep your purchase receipt as proof of purchase.
