CATA Sygma 1200, Vl3 15101023

Contents

Cata Sygma 1200, Vl3 15101023 Hood Extractor Motor

User Manual

1. Product Overview

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Cata Sygma 1200, Vl3 15101023 Hood Extractor Motor. This motor is designed as a replacement part for various Cata range hood models.

Front/side view of the Cata Sygma 1200 extractor motor, showing the main housing and wiring.

Figure 1: Front/side view of the Cata Sygma 1200 extractor motor.

2. Safety Information

WARNING: Installation and repair of this extractor motor require specialized technical knowledge. Improper installation by the buyer may cause irreversible damage to the motor or the range hood, and poses a risk of electrical shock or fire. It is strongly recommended that installation and any repairs be performed by a qualified and official technical service professional from the manufacturer.

  • Always disconnect power to the range hood before attempting any installation, maintenance, or repair.
  • Ensure all wiring connections are secure and comply with local electrical codes.
  • Handle the motor carefully to avoid damage to components, especially the fan blades and wiring.

3. Setup and Installation

This motor is a replacement part for specific Cata range hood models. Ensure compatibility before proceeding with installation.

  1. Preparation: Disconnect the range hood from the main power supply. Access the existing motor compartment according to your range hood's specific instructions.
  2. Removal of Old Motor: Carefully disconnect wiring and mounting hardware from the old motor. Note the orientation and connections for proper reinstallation.
  3. Junction Box Adjustment: On some range hood models, the junction box of this motor may interfere with the filter. This motor is designed to allow for adjustment of the junction box orientation to prevent such interference. Adjust as necessary to ensure proper clearance.
  4. Mounting: The packaging includes 2 supports with 2 screws for correct adaptation. Use these supports to securely mount the new motor in place.
  5. Wiring: Connect the motor's wiring to the range hood's electrical system. Refer to the range hood's wiring diagram for correct connections. Ensure all connections are tight and insulated.
    Angled side view of the extractor motor, highlighting the wiring connections.

    Figure 2: Wiring connections on the extractor motor.

  6. Reassembly: Reassemble the range hood components, ensuring no wires are pinched and all parts are securely fastened.
  7. Testing: Reconnect power to the range hood and test the motor's operation.

4. Operating Instructions

The Cata Sygma 1200, Vl3 15101023 Hood Extractor Motor functions as an integral part of your range hood's ventilation system. Its operation is controlled directly by the range hood's user interface (e.g., buttons, touch controls, remote control).

  • Refer to your specific Cata range hood's user manual for detailed instructions on how to operate the fan speeds and lighting.
  • Ensure the motor runs smoothly without unusual noises or vibrations.

5. Maintenance

Regular maintenance of your range hood, including its motor, ensures optimal performance and longevity.

  • Cleaning: Periodically clean the fan blades and motor housing to prevent grease and dust buildup. Ensure power is disconnected before cleaning. Use a soft, damp cloth; avoid abrasive cleaners.
  • Filter Maintenance: Ensure your range hood's grease filters are regularly cleaned or replaced as per your hood's manual. Clogged filters can reduce airflow and put strain on the motor.
  • Inspection: Annually inspect the motor for any signs of wear, loose connections, or unusual noises.
Rear view of the extractor motor, showing the fan blades and air outlet.

Figure 3: Rear view of the extractor motor, showing fan blades.

6. Troubleshooting

If you experience issues with your range hood's extraction, consider the following:

  • Motor Not Running: Check power supply to the range hood. Verify all electrical connections to the motor are secure.
  • Reduced Extraction: Ensure grease filters are clean and not obstructed. Check for any blockages in the ductwork.
  • Unusual Noise/Vibration: Disconnect power and inspect the fan blades for any foreign objects or damage. Ensure the motor is securely mounted.
  • Junction Box Interference: If the motor 'trips' on the filter, it indicates an issue with the junction box's position. Re-check the installation and adjust the junction box orientation as described in the setup section.

For persistent issues, contact an official technical service from the manufacturer.

7. Specifications

Feature Detail
Brand Name CATA
Type Range Hood Parts
Model Number Vl3 15101023
Product Name Sygma 1200 Hood Extractor Motor
Package Length 30 cm
Package Width 40 cm
Package Height 40 cm
Package Weight 1.1 kg

Compatible Cata Range Hood Models:

  • Angolo Vl3 Inox/B
  • Arte 900XGBK, Arte 900XGWH
  • Atenea 600XGBK, Atenea 600XGWH, Atenea 700 XGWH, Atenea 900 XGBK, Atenea 900XGWH
  • Atlas 900GXWH, Atlas 900XGBK
  • Beta 600 X/D, Beta 700 X/D, Beta 900 X/D, Beta Vl3 700/B, Beta Vl3 900/C
  • Corfu TC3V Duralum 700/A
  • Gamma 600 GX/E, Gamma 600_D, Gamma 700 GX/E, Gamma 900 GX/E
  • Gamma Glass Vl3 700_C, Gamma Glass Vl3 900_D
  • GC Dual BK 45, GC Dual WH 45
  • GL 45X/B, GL45X, GL45X/A
  • GT-Plus 45 BK/C, GT-Plus 45 IX/C, GT-Plus 45 WH/C, GT-Plus 45 X/C
  • Isla Faro, Isla Selene 900/C, Isla Sygma Vl3 1200 Inox/C, Isla Sygma Vl3 900 Inox/C
  • Selene 9000 Inox/B
  • Sygma 1200/B, Sygma 900 BK/C, Sygma Vl3 600/B, Sygma Vl3 700/B, Sygma Vl3 900 D, Sygma Vl3 900/B
  • TF-6600 Duralum
  • Thalassa 600 XGBK/B, Thalassa 600 XGWH, Thalassa 700XGBK, Thalassa 700XGWH, Thalassa 900XGBK/B, Thalassa 900XGWH
  • Thalassa TC3V 600 Negra, Thalassa TC3V 700 Negra, Thalassa TC3V 900 Blanca, Thalassa TC3V 900 Negra
  • Vega600Vl3
  • Venere Vl3 600 Black Glass

8. Warranty and Support

The repair of this product must be carried out by an official technical service from the manufacturer. Any attempt to repair by unauthorized personnel may void the warranty and cause further damage.

For warranty claims, technical assistance, or to locate an authorized service center, please contact CATA customer support or visit their official website.

9. User Tips

  • Professional Installation is Key: Given the complexity and potential for damage, always opt for professional installation. This ensures correct adaptation and prevents issues like the junction box interfering with filters.
  • Check Duct Compatibility: Before purchasing or installing, verify the outlet pipe hole diameter of this motor is compatible with your existing ductwork to ensure efficient ventilation.
  • Regular Cleaning: Keep your range hood's filters and the motor area clean from grease buildup. This significantly extends the life of the motor and maintains optimal performance.

© 2023 CATA. All rights reserved. Information in this manual is subject to change without notice.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.