Introduction
Thank you for choosing the AIKE AK1335 Automatic Liquid Soap Dispenser. This manual provides essential information for the safe and efficient use of your new device. Please read it thoroughly before installation and operation, and keep it for future reference.
Product Features
- Designed to work with liquid soap; not suitable for foaming soap.
- USB rechargeable with a 2000mAh battery, offering up to 6 months of use on a single charge.
- Features a Type-C or magnetic suction charging port (new and old models may vary).
- Easy wall-mounting capability to save countertop space.
- Fully transparent liquid chamber for easy monitoring of soap levels.
- Wide opening with a screw cap for convenient and mess-free refilling.
- Peristaltic pump design with 5 adjustable liquid dispense levels for precise control.
- Rapid 0.2-second discharge for quick and efficient use.
- Versatile application for dish soap, hand soap, or hand sanitizer.
Package Contents
Ensure all items are present and in good condition upon unpacking:
- AIKE AK1335 Automatic Liquid Soap Dispenser x1
- USB Charging Cable x1 (Type-C or magnetic suction)
- Instruction Manual x1 (this document)
- Tips Card x1
- Wall-mount hook x1
Specifications
| Model Number | AK1335 |
| Brand Name | AIKE |
| Material | ABS plastic |
| Origin | Mainland China |
| Certification | CE |
| Dimensions (L*W*H) | 157mm * 82.5mm * 227mm (approx. 9.8 x 7.05 x 4.29 inches) |
| Net Weight | approx. 440g (0.42kg) |
| Capacity | 500ml (17 oz.) |
| Automatic Type | Liquid Soap Dispenser |
| Power Supply | Lithium battery / Type-C or Magnetic Suction Charging Interface |
| Sensor Type | Infrared induction diffuse reflection |
| Liquid Dosage | 1.0-3.0ml (5 levels adjustable) |
| Sensing Distance | 3-7cm |
| Ambient Temperature | 0-45 °C |
| Ambient Humidity | ≤ 80 °C |
| Waterproof Grade | IPx4 |
Setup
- Initial Charging: Before first use, fully charge the dispenser. Connect the provided USB charging cable to the dispenser's charging port (Type-C or magnetic suction) and a suitable USB power source (adapter not included). A full charge typically takes about 7 hours. The indicator light may show charging status.
- Filling the Dispenser:
- Twist and remove the top cap of the dispenser.
- Pour liquid soap into the transparent chamber. Do not overfill. Ensure the liquid is not foaming soap.
- Securely replace the top cap.
Easy Refilling - Placement Options:
- Desktop Use: Place the dispenser on a stable, non-reflective surface.
- Wall Mounting: Use the provided wall-mount hook. Clean the desired wall surface thoroughly. Attach the hook firmly to the wall, then slide the dispenser onto the hook. This saves countertop space.
Desk or Wall Mount Options 
Wall-hanging Installation
Operating Instructions
- Power On/Off: Locate the on-off button (refer to the 'Product Dimensions and Components' diagram). Press and hold the button to turn the dispenser on or off.
- Automatic Dispensing: Place your hand or a sponge within the sensing distance (3-7cm) below the outlet nozzle. The infrared sensor will detect your presence and dispense liquid soap automatically within 0.2 seconds.
- Adjusting Dispense Volume: The dispenser features 5 adjustable levels for liquid output. To change the level, briefly press the on-off button while the dispenser is on. Each press will cycle through the 5 levels, indicated by the indicator light or a subtle change in dispense volume. Experiment to find your preferred amount.
5 Levels Liquid Adjustable 
5 Gears Adjustable Dispense
Maintenance
- Refilling: When the liquid level in the transparent chamber is low, refill the dispenser as described in the 'Setup' section.
- Cleaning: Wipe the exterior of the dispenser with a soft, damp cloth. Do not submerge the dispenser in water or use abrasive cleaners.
- Battery Care: Recharge the dispenser when the indicator light suggests low battery. Avoid completely draining the battery frequently to prolong its lifespan.
Troubleshooting
- Dispenser not turning on: Ensure the dispenser is fully charged. Connect it to the charging cable and allow sufficient time for charging.
- No liquid dispensed:
- Check the liquid level in the transparent chamber and refill if necessary.
- Ensure your hand or sponge is within the 3-7cm sensing range.
- Verify that the liquid soap is not too thick or clogs the nozzle. Dilute if needed, or clean the nozzle.
- Inconsistent dispensing: Adjust the dispense volume settings (5 levels) to find the optimal flow for your soap type.
User Tips
- This dispenser is designed for liquid soap and will not produce foam. If you prefer foaming soap, a different type of dispenser would be required.
- Take advantage of the 5 adjustable dispense levels to conserve soap and get the perfect amount for your needs, whether it's for handwashing or dishwashing.
- When placing the dispenser on reflective surfaces like glass tables, ensure the liquid outlet is at least 35cm (13.8 inches) away from the tabletop to prevent accidental dispensing due to sensor reflection. For non-reflective surfaces like wood, this distance is less critical.
- The 2000mAh battery provides long-lasting power, often up to 90 days or 6 months depending on usage. Regular charging when indicated will ensure continuous operation.
Warranty and Support
AIKE provides a 1-year warranty for this product. If the product is damaged due to non-human reasons within this period, please contact AIKE customer support for assistance. We are committed to ensuring your satisfaction with our products.
For support or warranty claims, please refer to the contact information provided on the product packaging or the official AIKE website.
