1. Introduction
This manual provides detailed instructions for the installation, operation, and troubleshooting of your ISUDAR DSP Amplifier Power Cable. This cable is designed to provide power and signal connections for ISUDAR DSP amplifiers in various car models, supporting a plug-and-play installation.
For a complete digital version of this manual, please refer to the User Manual (PDF).
2. Features
- Six-core professional DSP module: Offers comprehensive, more accurate sound processing, achieving a higher degree of audio reproduction.
- Ideal position adjusting: Allows adjusting the speakers' sound delay to make the listener feel centered, adjusted by the sound delay of the speakers, which is adjusted by taking the listener as the center point.
- 31-band floating-point EQ with curve adjustment: Allows adjusting the music style to your preference. (Note: Apple system compatibility may be limited).
- iPhone and Android mobile phones adjusting: Simple and practical interface, allowing adjustment via mobile phone (supports 6-channel output).
- WiFi mobile phone connection: 2.4G WiFi module for connection to computers, mobile phones, Android DVD players. (Note: inquire about computer software and APK for mobile phones/DVD player after purchasing).
- Bluetooth music playback on mobile phones: Bluetooth Version 5.0 for connecting to mobile phones to play music (non-destructively). If the car host has Bluetooth function and supports Bluetooth connections, connect the car and mobile phone pair first and then connect to the DSP.
- Low voltage protection: If the car battery voltage is lower than 10.5V, the system will enter low voltage protection state. No sound will be produced. If no sound is heard when listening, it may indicate battery discharge. This function helps prevent battery damage.
- Power amplification: The circuit is rigorous, the materials are solid. Highly restored sound, clear and transparent treble, mellow midrange, and full and strong bass.
3. Compatibility
The ISUDAR DSP Amplifier Power Cable is designed for a wide range of vehicles. Please select the appropriate cable based on your car's make, model, and connector type. If you are unsure, please contact support for assistance.
Compatible Car Models:
- VW / SKODA (MQB, Old VW)
- TOYOTA (Camry, COROLLA 2019)
- HONDA
- Mazda
- NISSAN
- Ford
- AUDI (A3/TT/A6)
- BMW
- PEUGEOT (308)
- Citroen (C5)
- Benz Mercedes (B class, C class)
- HYUNDAI (Low Configuration, IX35, Elantra)
- Kia (K5/K2/K3/K4)
- Renault
- Universal 16-pin Android Radio
4. Installation Guide
The ISUDAR DSP Amplifier Power Cable supports a plug-and-play installation for compatible vehicles. Ensure your vehicle's ignition is off before beginning installation.
4.1 General Cable Overview

The cable connects your car's stereo system to the DSP amplifier. Identify the correct connectors in your vehicle that match the cable ends.
4.2 Specific Vehicle Wiring Diagrams
Below are wiring diagrams for various car models. Locate the diagram that corresponds to your vehicle for proper connection.
4.2.1 For VW / SKODA

4.2.2 For VW / SKODA MQB

4.2.3 For VW / SKODA / SEAT / FORD / PEUGEOT / AUDI / BMW / BENZ

4.2.4 For TOYOTA

4.2.5 For NISSAN

4.2.6 For HYUNDAI Low Configuration

4.2.7 For HYUNDAI IX35, Elantra, Kia K5/K2/K3/K4

4.2.8 For Benz Mercedes B class, C class, Audi A3/TT/A6

4.2.9 For Renault

4.2.10 For Peugeot 308, Citroen C5

4.2.11 For Camry, COROLLA 2019

4.2.12 For 16 pins Android Radio

4.3 Universal Cable
If you cannot find a suitable connector for your specific car model, a universal cable is available. This cable requires manual wiring to match your vehicle's audio system.

5. Operating Instructions (DSP Software)
The DSP amplifier's settings can be adjusted via a dedicated software interface on Windows systems or through a mobile application for iPhone and Android devices. Ensure the DSP amplifier is properly connected and powered on before attempting to configure settings.
5.1 Windows System User Manual
To operate the DSP amplifier using a Windows system, follow these steps:
- Connection: Both the DSP amplifier and your computer should be connected automatically. If connection fails, check the car power cable, car host, DSP power LED, and USB cable connection. Ensure the car host is turned on and the DSP power LED is on.
- Sound Output: After power on, wait a few seconds for sound output. If there is no sound, check all cables.
- Power Supply: Use a power supply between 10 and 16 volts.
- WiFi Connection: For machines with WiFi, connect to WiFi via computer or mobile phone (default name is Car_DSP). USB has priority over WiFi.
- Input Selection (SRC): Select the sound source (e.g., HighLevelMix for AUX or Bluetooth).
- Channel Setting: Adjust individual channel settings for volume, phase, and input channels.
- 31-band EQ Adjustment: Adjust frequency (20-20000 Hz), Q value (0.1-10), and gain (-15-15 dB) for each band.
- Filter Settings (Highpass & Lowpass): Adjust filter type (Butterworth, Bessel), frequency, and band slope (12dB/Oct to 48dB/Oct).
- Parametric Equalization (PEQ or GEQ): Adjust gain, equalization, and frequency.
- Universal Settings: Access setup, file management, input volume, and delay settings.
- File Management: Save/Load sound parameters to/from the DSP device or PC.
5.2 iPhone and Android System User Manual
To operate the DSP amplifier using the mobile application, follow these steps:
- Manual Connection Button: Connect your mobile device to the DSP via WiFi (WiFi name: "Car_DSP"). After entering the app, it should automatically connect. If not, click the button to connect.
- Version Information: View the DSP device version and app version.
- Master Volume Adjustment and Mute Buttons: Control the overall volume and mute function.
- List of Pre-stored Sound Effects: Select from various sound effects (Current, Universal, Voice, Rock, Classical, Soft, Original).
- Current Sound Effect: The currently playing sound effect is highlighted.
- Delay Setting: Adjust delay for front left, front right, rear left, rear right, center, and subwoofer channels (Range: 0-12.5 ms). Units can be ms or mm.
- Filter for Each Channel: Adjust low-cut and high-cut filter types, frequencies, and slopes.
- Volume Control of Each Channel: Adjust individual channel volumes.
- Joint Tuning: Adjust front, rear, center, and subwoofer sound fields together or independently.
- Balance Adjustment Interface: Fine-tune audio balance.
- Band Equalizer (EQ) Adjustment: Adjust frequency, Q value, and gain for each band.
- Reset & Reset All: Reset individual channel settings or all settings to default values.
- Auto Adjustment: Collect sound field signals in the car through the microphone for automatic sound effect correction.
6. Troubleshooting
If you encounter issues, please consider the following points:
6.1 Connection Issues
- No connection: Turn off the car power, plug in all plugs, then turn on the car power. All indicators should be on, indicating the system is working properly.
- Cannot connect to DSP WiFi: Connect to a computer via the data cable, or connect to DSP WiFi (name: Car_DSP), or install the APK to mobile or Android DVD player, and connect to DSP WiFi. Turn on the DSP program, select sound source, such as: High Level.
- No sound output: Adjust the volume of the car host to 0, reset all the EQ adjustment of car host. Slowly increase the volume of the car host to the volume you are usually listening to. Reset all the pre-stored sound effects in the DSP program (7 pre-set sound effects). If none of the pre-stored sound effects can reach the sound effect you need, fine-tune the 31 band EQ.
6.2 Sound Quality Issues
- Sound is turbid: Attenuate the frequency band near 250Hz.
- Sound sounds like a horn: Attenuate the frequency band near 500Hz.
- Sound needs improvement: Consider using attenuation.
- Sound needs to be different: Consider using boost.
- Recording equipment limitations: If your recording equipment is limited or due to vocal conditions, and no sound is collected or emitted in this frequency band, do not waste time adjusting this frequency band.
- DSP working indicator not lit up normally: Check all cables are connected properly.
- Cannot log into DSP system interface: Check if the sound source selector corresponds to the sound source you are using.
- Selected sound source is playing audio: Ensure the selected audio source is normal.
- Cracking sound when increasing volume: If the audio input volume is too high, or if the car host EQ is reset, the frequency is increased by both car host EQ and the DSP, resulting in distortion.
- Quality of playing audio is not good: This indicates a general sound quality issue.
6.3 EQ Frequency Parameter Explanation
Understanding EQ frequency parameters can help in troubleshooting and optimizing sound quality:
- <32Hz, 40Hz (Infrasound and extremely low bass): Hard to hear by human ears, these can often be ignored.
- 50Hz, 63Hz: Gain values greater than +15dB can cause a slight harmonic resonance feeling.
- 80Hz, 100Hz, 125Hz, 160Hz, 200Hz (Main pitch zone of bass): Related to the thickness of the bass. Too strong can cause low-frequency resonance or a rumbling sound.
- 250Hz, 315Hz, 400Hz, 500Hz (Mid and low frequencies): Related to the strength of mid and low sounds.
- 630Hz, 800Hz, 1KHz (Main tone of midrange): Related to clarity and openness. Too much gain can cause a "nasal voice".
- 1.25KHz, 1.6KHz, 2KHz (Main vocals): Related to the hardness of the sound. Positive gain can improve brightness, but too much can make the voice harsh.
- 2.5KHz, 3.15KHz, 4KHz (Sharpness of human voice): Critical frequency point for sound sharpness. Too much lift can cause "tooth sounds".
- 5KHz, 6.3KHz, 8KHz (Main tone of treble): Related to crispness, clarity, and brightness of the treble.
- 10KHz, 12.5KHz, 16KHz, 20KHz (High frequencies): Above 8KHz, human voice becomes very slim. Excessive raising can make sound sharp and hairy.
- 20KHz (Ultrasound): Human ear cannot hear it, so no adjustment is needed.
7. Specifications
| Attribute | Value |
|---|---|
| Brand Name | ISUDAR |
| Item Type | Cables, Adapters & Sockets |
| Voltage | 12 V |
| Origin | Mainland China |
| Is It With PCB | No |
| High-concerned chemical | None |
| Package Length | 20 cm |
| Package Width | 20 cm |
| Package Height | 5 cm |
| Package Weight | 0.5 kg |
8. User Tips
- This cable is primarily designed to be harnessed for stereo systems, ensuring optimal audio signal transfer to your DSP amplifier.
- Always ensure the car host is turned on and the DSP power LED is illuminated for proper operation.
- When adjusting EQ settings, consider starting with attenuation rather than boost for a more natural sound improvement.
9. Warranty and Support
9.1 Warranty Information
Your ISUDAR DSP Amplifier Power Cable comes with the following warranty:
- Return Policy: You have 7 days to contact us and 30 days to return the item from the date it was received.
- Quality Issues: A 24-month warranty is provided for quality-related issues.
- Repair Service: If the product breaks or is damaged under normal usage, as per the instruction sheet, we will offer repair service within the warranty period.
9.2 Contact Information
If you have any questions or require support, please contact us through the following channels:
- Website: www.isudar.com
- Email: amplifier1@isudar.com
- Skype: david.isudar
- Facebook: Isudar
- VK: Isudar official store