1. Product Overview
The TOPDON JumpSurge3000 (JS3000) is a powerful and versatile 3000 Peak Amp jumpstarting tool and power bank designed for vehicles on and off the road. This device is capable of jumpstarting vehicles with 12V batteries, supporting engines up to 9L gas and 7L diesel. With the ability to perform up to 45 jump starts on a single charge, the JS3000 can revive a dead battery in as little as 1 second. Its robust design incorporates multiple protection systems and fast charging capabilities, ensuring reliability in various situations.

2. What's in the Box
The following items are included with your TOPDON JS3000 Jump Starter:
- 1x JumpSurge3000 Unit
- 1x Smart Battery Clamps
- 1x USB Cable
- 1x Ethylene Vinyl Acetate (EVA) Carrying Bag
- 1x User Manual

3. Safety Information
WARNING: Read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.
3.1. Smart Protection Features
The JS3000 is equipped with 7 safety protection measures to ensure safe operation:
- Short Circuit Protection
- Over Current Protection
- Reverse Polarity Protection
- Reverse Charge Protection
- Over Temperature Protection
- Over Discharge Protection
- Over Voltage Protection

3.2. General Safety Warnings
- Keep the device away from children.
- Do not disassemble the device. Disassembly may create a risk of fire, electric shock, or exposure to chemicals.
- Use the device in a well-ventilated area.
- Do not expose the device to water, rain, or snow.
- Do not operate the device if it has received a sharp blow, been dropped, or otherwise damaged.
- Do not use attachments not recommended or sold by the manufacturer, which may result in a risk of fire, electric shock, or injury to persons.
- Ensure the battery clamps are correctly connected to the vehicle battery terminals (positive to positive, negative to negative).
4. Product Features
4.1. Jump Starting Capability
The JS3000 delivers 3000 Peak Amps, enabling it to jump-start a wide range of 12V vehicles, including trucks, RVs, pickups, SUVs, and cars. It is suitable for up to 9L gas engines and 7L diesel engines, providing up to 45 starts on a single charge.

4.2. BOOST Function
The BOOST function is designed to provide an extra surge of power for severely discharged or damaged batteries. When activated, it delivers maximum current to initiate the jump-start process, acting as a 'do-over' button for difficult starting situations.

4.3. Power Bank Functionality
With a 24000mAh capacity, the JS3000 doubles as a powerful portable charger for your electronic devices. It features a USB Quick Charge 3.0 port (5V/3A, 9V/2A, 12V/1.5A) and a Type-C port with PD45W bidirectional charging (5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.25A output). It also includes a standard USB2 output (5V/2A) and a DC output (10A Max 16.8V), allowing it to charge laptops, cell phones, tablets, and power other 12V accessories like inflators, car refrigerators, and vacuum cleaners.

4.4. LED Flashlight
The integrated 400-lumen LED flashlight provides illumination in dark environments. It offers three modes: Steady, SOS, and Strobe, making it a useful tool for emergencies or general lighting needs.

4.5. Rugged Design and Durability
The JS3000 features a sturdy outer housing that is resistant to dust and wear. Its high-quality internal structure and circuitry allow it to operate reliably in extreme weather conditions, from -20°C (-4°F) to 60°C (140°F).

5. Setup
5.1. Initial Charging
Before first use, fully charge the JS3000. Connect the included USB cable to the Type-C input port on the device and to a suitable USB power adapter (not included, but a PD45W compatible adapter is recommended for fastest charging). The battery indicator lights will show the charging progress.
5.2. Connecting the Smart Battery Clamps
The smart battery clamps connect to the JS3000 via a dedicated port. Ensure the connection is secure before attempting to jump-start a vehicle.
6. Operating Instructions
6.1. Jump Starting a Vehicle
- Ensure the JS3000 is sufficiently charged (at least 50% recommended).
- Connect the smart battery clamps to the JS3000.
- Attach the red (positive) clamp to the positive (+) terminal of the vehicle battery.
- Attach the black (negative) clamp to the negative (-) terminal of the vehicle battery.
- Ensure the clamps are securely attached and there is good contact.
- Start your vehicle.
- Once the vehicle starts, immediately remove the clamps from the vehicle battery, then disconnect them from the JS3000.
6.2. Using the BOOST Function
If your vehicle battery is extremely dead or damaged and the JS3000 does not automatically detect it for a jump start, you can use the BOOST function:
- Follow steps 1-5 from the 'Jump Starting a Vehicle' section.
- Press and hold the 'BOOST' button on the JS3000 for 3 seconds. The indicator light will turn solid green.
- Within 30 seconds, start your vehicle.
- Once the vehicle starts, immediately remove the clamps from the vehicle battery, then disconnect them from the JS3000.
CAUTION: Do not use the BOOST function if the battery voltage is above 12.5V. Do not hold the BOOST button for more than 30 seconds.
6.3. Using the LED Flashlight
To operate the LED flashlight:
- Press the flashlight button once for Steady mode.
- Press again for Strobe mode.
- Press a third time for SOS mode.
- Press a fourth time to turn off the flashlight.
7. Maintenance
- Charging: For optimal battery life, fully charge the JS3000 every 3-6 months, even if not in use.
- Cleaning: Use a dry, soft cloth to clean the device. Do not use harsh chemicals or abrasive materials.
- Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. The recommended storage temperature is between -20°C (-4°F) and 60°C (140°F).
8. Troubleshooting
If you encounter issues with your JS3000, please refer to the following common problems:
- Device not turning on: Ensure the device is charged. If it still doesn't turn on, contact support.
- Vehicle not starting: Check that the clamps are securely connected to the correct battery terminals. Ensure the JS3000 has sufficient charge. If the battery is severely discharged, try using the BOOST function.
- Charging issues: Verify that the USB cable and power adapter are working correctly. Try a different cable or adapter.
For more detailed troubleshooting steps and solutions, please consult the comprehensive user manual available in PDF format: Download User Manual (PDF).
9. Specifications
| Feature | JS3000 Specification |
|---|---|
| Peak Amps | 3000A |
| Capacity (mAh) | 24000mAh / 88.8Wh |
| Start-up Capacity | 9L Gas, 7L Diesel |
| Input (Type-C) | PD45W: 5V/3A, 9V/3A, 12V/3A, 15V/3A |
| Output (Type-C) | PD45W: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.25A |
| Output (USB1) | QC18W: 5V/3A, 9V/2A, 12V/1.5A |
| Output (USB2) | 5V/2A |
| Output (DC) | 10A Max 16.8V |
| Button on Jump Starter | Power Button*1, BOOST*1 |
| Length of Clamp Cable | Positive: 250mm, Negative: 200mm |
| Protections | Short Circuit, Over Current, Reverse Polarity, Reverse Charge, Over Temperature, Over Discharge, Over Voltage |
| Operating Temperature | -20°C to 60°C (-4°F to 140°F) |

10. User Tips
- The JS3000 is noted for its ease of use, even for novices.
- Users report excellent and fast performance, with the device maintaining charge well over multiple jump starts.
- The product is designed for easy installation and is considered durable and long-lasting.
11. Warranty and Support
TOPDON products are built to the highest quality standards and are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the official TOPDON website or the warranty information provided in the full user manual.
12. Contact Information
For further assistance, technical support, or inquiries, please contact TOPDON through the following channels:
- Website: www.topdon.com
- Sales Email: sales@topdon.com
- Support Email: support@topdon.com
- Social Media: @topdonofficial
- North America Phone: +1-833-629-4832
- China Phone: +86-755-21612590
- China HQ Address: Unit 2005 20/F, No.3040 Xinghai Avenue, Qianhai Shimao Tower, Qianhai Shenzhen-Hongkong Cooperation Zone, Shenzhen, PR, China 518000
- USA HQ Address: 400 Commons Way, Suite A, Rockaway, NJ 07856