ZUOYI GAS67

Contents

ZUOYI GAS67 Hot Swap Customized Mechanical Keyboard Kit User Manual

Model: GAS67

Introduction

The ZUOYI GAS67 Hot Swap Customized Mechanical Keyboard Kit provides a foundation for building your personalized mechanical keyboard. This kit features a gasket structure, hot-swappable PCB compatible with 3/5 pin switches, Type-C connectivity, and RGB lighting. Please note that this kit comes unassembled, requiring manual assembly of its components.

The kit includes:

  • Spring Type-C Cable
  • Keyboard Shell (Case)
  • PCB Circuit Board
  • PC Positioning Board
  • Poron Gasket
  • Satellite Shafts (Stabilizers)
  • Screws
  • IXPE Switch Pad
  • Other small accessories for assembly
GAS67 Keyboard Kit Components

Image: All components included in the GAS67 keyboard kit.

Setup and Assembly

Assembling your GAS67 keyboard kit is a rewarding process. Follow these steps carefully:

Assembly Video Guide

Video: A step-by-step guide to assembling the GAS67 keyboard kit, including a sound test.

Detailed Assembly Steps

  1. Prepare Components: Unpack all components including the PCB, PC positioning board, IXPE switch pad, satellite shafts (stabilizers), gasket strips, screws, and the keyboard case.
  2. Lubricate Stabilizers: Lubricate the satellite shafts (stabilizers) by applying grease on both sides of the switch housing and the wire. This ensures smooth operation and reduces rattle.
  3. Install Stabilizers: Install the lubricated satellite shafts onto the PCB.
  4. Apply IXPE Switch Pad: Carefully place the IXPE switch pad onto the PCB, aligning it with the switch holes.
  5. Initial Switch Installation: Install 4 switches into the PCB and PC positioning plate. This helps to fix the positioning plate and the shell during the initial assembly phase.
  6. Apply Gasket Strips: Attach the poron gasket strips to the designated areas on the keyboard case. These gaskets are crucial for the keyboard's gasket mount structure, providing a softer typing feel and improved acoustics. Gasket Structure Diagram

    Image: Diagram illustrating the gasket structure for improved typing feel and sound.

  7. Connect PCB to Case: Carefully place the assembled PCB and positioning plate into the bottom case, ensuring the Type-C connector aligns with the case opening. Secure with screws as needed.
  8. Install Remaining Switches: Insert the rest of your chosen 3-pin or 5-pin mechanical switches into the hot-swappable sockets on the PCB. Ensure they are fully seated.
  9. Install Keycaps: Place your desired keycaps onto the switches.
  10. Final Assembly: Close the keyboard case and secure it with screws.
Exploded View of Keyboard Kit Structure

Image: Exploded view showing the layers of the keyboard kit structure, including the transparent cover, poron gasket, PC positioning board, silicone muffler pad, PE switch pad, PCB board, and transparent bottom case.

Operating Instructions

Basic Connectivity

Connect the keyboard to your computer using the provided Type-C USB cable. The keyboard is plug-and-play for basic functionality.

Key Functions (Fn Combinations)

The GAS67 keyboard features a compact 67-key layout. Many functions are accessed via the 'Fn' key in combination with other keys. Refer to the diagram below for specific key combinations:

Keyboard Key Function Diagram

Image: Diagram detailing the Fn key combinations for various functions such as F1-F12, media controls, backlight adjustments, and Win key lock/unlock.

  • Fn + F1-F12: Access standard F-key functions.
  • Fn + T: Reset function.
  • Fn + Y: Lock the keyboard.
  • Fn + U: Mute.
  • Fn + I: Volume down.
  • Fn + O: Volume increase.
  • Fn + P: Previous track.
  • Fn + [: Next track.
  • Fn + ]: Play/Pause.
  • Fn + H: Monochrome switching.
  • Fn + J: Direction of backlight switch.
  • Fn + K: Backlight on/off.
  • Fn + L: Bright adjustment.
  • Fn + Win: Win key lock/unlock.
  • Fn + G: The ESC key on the left becomes `~/` and the `~` on the right becomes ESC.

Custom Driver Software

The keyboard supports custom driver software to modify key positions, lighting effects, and macros. This software allows for advanced personalization of your keyboard experience.

  • Lighting Control: Adjust RGB lighting effects, brightness, and color. The keyboard also features a musical rhythm function where lights change with system sound. Software Lighting Control

    Image: Screenshot of the keyboard software interface for controlling lighting effects.

    Software Music Rhythm Setting

    Image: Screenshot of the keyboard software interface for enabling music rhythm lighting.

  • Key Settings: Remap keys to suit your preferences. Software Key Settings

    Image: Screenshot of the keyboard software interface for customizing key assignments.

  • Macro Settings: Create and assign macros for complex commands. Software Macro Settings

    Image: Screenshot of the keyboard software interface for configuring macros.

Please contact the seller to obtain the driver software and installation instructions.

Maintenance

  • Cleaning: Regularly clean your keyboard with a soft brush or compressed air to remove dust and debris. For keycaps, you can remove them and wash with mild soap and water, ensuring they are completely dry before reattaching.
  • Switch Care: If you notice any switches feeling inconsistent, you can carefully remove them using a switch puller and inspect for debris or re-lubricate if necessary.
  • Cable Management: Avoid sharp bends or excessive pulling on the Type-C cable to prevent damage.

Troubleshooting

  • Keyboard Not Responding:
    • Ensure the Type-C cable is securely connected to both the keyboard and your computer.
    • Try connecting the keyboard to a different USB port on your computer.
    • Test with a different Type-C cable if available.
  • Switches Not Registering:
    • Carefully remove the affected switch and re-insert it, ensuring the pins are straight and properly seated in the hot-swap socket.
    • If the issue persists, try swapping the problematic switch with a known working switch to determine if the issue is with the switch or the PCB socket.
  • Stabilizers Rattle/Feel Mushy:
    • Ensure the satellite shafts are properly installed and lubricated. Re-lubricating with a suitable grease can often resolve rattling.
  • Software Compatibility:
    • The provided software is typically designed for Windows. If you are using macOS or another operating system, please contact the seller for potential alternative drivers or compatibility information.

Specifications

Feature Detail
Product Name GAS 67
Key Arrangement 67 Keys
Connection Method Type-C Wired Hot Plug Connection
Backlight Mode RGB Symphony Backlight
PCBA White Thickened PCBA
Muffler Configuration Muffler Silicone Pad + IXPE Switch Gasket
Dimensions (L*W*H) 326*120*26mm
Full Size Keyboard No
Wrist Support No
Style Ergonomics, Multimedia, Gaming, Mini, Multifunctional Keyboard
Interface Type USB
Battery Included No
Operation Style Mechanical
Language English
Application Desktop, Laptop
GAS67 Translucent Shell

Image: The translucent shell design of the GAS67 keyboard kit.

User Tips

  • Assembly Patience: Remember that this is an unassembled kit. Take your time during assembly, especially when installing switches and stabilizers, to ensure proper seating and functionality.
  • Stabilizer Lubrication: Don't skip lubricating the satellite shafts. This significantly improves the typing experience by reducing unwanted noise and friction.
  • Sound Profile: The PC positioning plate and spacer structure are designed to enhance key rebound and reduce noise, contributing to a pleasant typing sound.
  • Switch Compatibility: The hot-swappable PCB is compatible with both 3-pin and 5-pin mechanical switches, offering flexibility in your switch choice.
  • Stabilizers Included: Even if you select the 'No Switch' option, the kit will still include the necessary stabilizers for assembly.

Support

For any questions regarding assembly, operation, or troubleshooting that are not covered in this manual, please contact the seller directly for assistance. They can provide further guidance and support, including access to the custom driver software.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.