1. Introduction
Thank you for choosing SKYGOD PTFE FEP Tubing. This high-quality tubing is designed for a wide range of applications, particularly in 3D printing as Bowden J-head pipes, and for transferring various liquids and gases in demanding environments. Its superior material properties ensure excellent performance and durability.

2. Specifications
Our PTFE FEP Tubing is manufactured to high standards, offering reliable performance across various conditions.

General Properties:
- Material: PTFE/FEP (F4, F46, PTFE)
- Voltage Grade: 600V
- Temperature Range: -73°C to 260°C
- Tensile Strength: ≥24.5MPa
- Melting Point: 327°C
- Dielectric Coefficient: 103-106HZ 2.1
- Voltage Withstanding: 3000V (60 seconds)
- Color Options: Milky White, Clear, Blue, Red, Grey, Black
- Certification: RoHS
Dimensions (Unit: mm):
| Size | ID | OD | Size | ID | OD |
|---|---|---|---|---|---|
| 1x2 | 1.00±0.20 | 2.00±0.20 | 2x3 | 2.00±0.20 | 3.00±0.20 |
| 2x4 | 2.00±0.25 | 4.00±0.25 | 3x4 | 3.00±0.25 | 4.00±0.25 |
| 3x5 | 3.00±0.30 | 5.00±0.30 | 4x6 | 4.00±0.30 | 6.00±0.30 |
| 5x7 | 5.00±0.30 | 7.00±0.30 | 6x8 | 6.00±0.30 | 8.00±0.30 |
| 8x10 | 8.00±0.30 | 10.0±0.30 | 10x12 | 10.0±0.30 | 12.0±0.30 |
Note: The specification data is for reference only.
3. Key Features
- High Temperature Resistance: Withstands temperatures up to 260°C.
- Low Temperature Resistance: Maintains integrity down to -73°C.
- Chemical Resistance: Resistant to climate, corrosion, various chemicals, acids, alkalis, and oils.
- High Lubrication: Provides a smooth internal surface for efficient material transfer.
- Non-Adherence: Prevents sticking and blockages.
- Non-Toxic & Harmless: Safe for various applications.
- High Insulation: Offers excellent electrical insulation properties.
- High Transparency: Clear tubing allows for visual inspection of flow.
- Durable: Possesses a certain hardness and is not easily deformed, ensuring long-term use.


4. Setup and Installation
Proper installation ensures optimal performance and longevity of your PTFE FEP tubing.
- Measure and Cut: Carefully measure the required length of tubing. Use a sharp, clean cutting tool to ensure a straight, burr-free cut. This prevents kinks and ensures a proper fit.
- Check Dimensions: Ensure the inner diameter (ID) and outer diameter (OD) of the tubing match your connectors or application requirements.
- Ensure Uniform Thickness: The tubing is designed with uniform thickness for consistent performance. Avoid any compression or stretching that might alter its dimensions.
- Secure Connections: For 3D printer Bowden setups, ensure the tubing is securely seated in the connectors to prevent filament slippage or gaps. For fluid transfer, use appropriate fittings and clamps to prevent leaks.

5. Operating Guidelines
This tubing is versatile and can be used in various demanding applications:
- 3D Printing: Ideal for Bowden J-head setups due to its low friction and high-temperature resistance, ensuring smooth filament feeding.
- Chemical Transfer: Suitable for transferring chemical raw materials, corrosive substances, and other aggressive fluids due to its excellent chemical resistance.
- Liquid and Gas Transport: Can be used for transporting high and low-temperature liquids and gases in industrial or laboratory settings.
- Electrical Insulation: Provides reliable insulation for various electronic and communication components.
6. Maintenance
To ensure the longevity and optimal performance of your PTFE FEP tubing, follow these maintenance guidelines:
- Regular Inspection: Periodically check the tubing for any signs of wear, cracks, discoloration, or damage, especially in areas subject to high stress or temperature fluctuations.
- Cleaning: If used for fluid transfer, ensure the tubing is cleaned regularly according to the nature of the substances it carries. PTFE/FEP's non-stick properties make it easy to clean.
- Storage: Store unused tubing in a clean, dry place away from direct sunlight and extreme temperatures to prevent degradation.
- Avoid Kinking: While flexible, avoid sharp bends or kinks that could permanently deform the tubing and restrict flow.
7. Troubleshooting
Most issues with PTFE FEP tubing are related to improper installation or extreme operating conditions. Here are some common problems and solutions:
- Restricted Flow/Blockages:
- Cause: Kinked tubing, foreign particles, or material buildup (less common with PTFE/FEP).
- Solution: Inspect the tubing for kinks and straighten if possible. Disconnect and flush the tubing to remove any blockages.
- Leaks at Connections:
- Cause: Improperly seated fittings, damaged connectors, or incorrect tubing size.
- Solution: Re-seat the tubing firmly into the connectors. Check connectors for damage and replace if necessary. Ensure the tubing's OD matches the fitting's specifications.
- Tubing Degradation/Damage:
- Cause: Exposure to temperatures or chemicals beyond specified limits, physical abrasion.
- Solution: Verify operating conditions are within the specified temperature and chemical resistance ranges. Replace damaged tubing immediately.
8. User Tips
Based on user feedback, here are some helpful tips for using your PTFE FEP tubing:
- Verify Dimensions: Always double-check the inner and outer diameters of the tubing against your application's requirements to ensure a perfect fit and prevent issues like filament binding in 3D printers or leaks in fluid systems.
- Smooth Cuts: When cutting the tubing, use a dedicated tube cutter or a very sharp blade to achieve a clean, perpendicular cut. Ragged edges can cause friction or impede flow.
- Consider Length: While available in various lengths (e.g., 1m, 5m), consider purchasing a slightly longer piece than needed to allow for mistakes or future adjustments.
9. Warranty and Support
For any questions, concerns, or support regarding your SKYGOD PTFE FEP Tubing, please contact the seller directly through the platform where you made your purchase. They will be able to assist you with product-specific inquiries and any potential warranty claims.