Introduction
Thank you for purchasing the HOMCOM Kitchen Cupboard Cabinet. This versatile storage unit is designed to help you organize your kitchenware, small appliances, and other items efficiently. Constructed from durable wood melamine, it features a 2-door upper module, a spacious countertop, three convenient drawers, and a 1-door lower module with adjustable interior shelves. Please read this manual carefully before assembly and use to ensure proper installation and long-lasting enjoyment of your new furniture.

Safety Information
- Always assemble the unit on a clean, flat, and soft surface (e.g., carpet) to prevent scratches.
- Ensure all parts are present and undamaged before beginning assembly.
- Do not overtighten screws, as this may damage the material.
- Use the provided anti-roll safety hardware to fix the cabinet to the wall for stability and to prevent tipping, especially in households with children or pets.
- Keep small parts and packaging materials away from children.
- Do not exceed the maximum load capacities specified in the "Specifications" section.
Package Contents
Your HOMCOM Kitchen Cupboard Cabinet package includes the following components:
- 1 x Kitchen Cupboard (unassembled components)
- 1 x Instruction Manual (this document)
- All necessary hardware for assembly (screws, dowels, hinges, handles, shelf pegs, anti-tip kit)
Setup and Assembly
Assembly is required for this product. Please follow the step-by-step instructions provided in the included assembly guide (separate from this manual) for detailed visual instructions. The general steps involve:
- Unpacking: Carefully unpack all components and hardware. Verify against the parts list in the assembly guide.
- Base Assembly: Assemble the base frame and attach the feet.
- Lower Module Assembly: Construct the lower cabinet module, including the side panels, back panel, and bottom/top panels. Install the door and drawers according to the guide.
- Upper Module Assembly: Construct the upper cabinet module.
- Connecting Modules: Securely attach the upper module to the lower module, ensuring proper alignment.
- Shelf Installation: Insert the adjustable interior shelves into the desired positions using the provided shelf pegs.
- Handle Installation: Attach the chrome handles to the doors and drawers.
- Anti-Tip Safety: Secure the cabinet to a wall using the anti-roll safety hardware provided. This is a crucial step for stability.
Adjusting Hinges
After assembly, you may need to adjust the door hinges to ensure the doors are flush and operate smoothly. Refer to the diagram below for common hinge adjustment points:

- a: Adjust Up and Down - Typically controls the vertical alignment of the door.
- b: Adjust Front and Back - Controls how far the door sits from the cabinet frame.
- c: Adjust Left and Right - Controls the horizontal gap between doors or between a door and the cabinet side.
Adjusting Shelves
The interior shelves in the cabinets are adjustable. To change their height, simply remove the shelf, reposition the shelf pegs into the desired holes, and then place the shelf back on the pegs.

Operating and Use
This cabinet is designed for versatile storage in your kitchen, dining room, or living room. Its various compartments offer organized storage solutions:
- Upper Module: Two doors conceal spacious compartments with adjustable shelves, ideal for storing plates, glasses, or pantry items.
- Countertop: The open countertop area is perfect for placing small kitchen appliances like microwaves, coffee makers, or toasters.
- Drawers: Three drawers on the bottom left provide convenient storage for cutlery, utensils, napkins, or other small kitchen essentials.
- Lower Module: The single-door lower module offers additional storage space, also with adjustable shelving, suitable for larger items or less frequently used kitchenware.

Maintenance
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as they can damage the wood melamine finish.
- Spills: Clean up spills immediately to prevent staining or moisture damage.
- Hardware: Periodically check all screws and fittings to ensure they remain tight. Retighten if necessary.
- Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration of the finish.
- Moisture: Keep the cabinet away from excessive moisture or humidity.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Doors are not aligned or do not close properly. | Hinges are not properly adjusted. | Refer to the "Adjusting Hinges" section (Figure 2) and adjust the screws (a, b, c) as needed to align the doors. |
| Cabinet feels wobbly or unstable. | Screws are loose; anti-tip kit not installed or improperly installed. | Ensure all assembly screws are tightened. Verify the anti-tip safety hardware is securely fastened to both the cabinet and the wall. |
| Drawers do not slide smoothly. | Drawer slides are misaligned or dirty. | Check that the drawer slides are correctly installed and aligned. Clean any debris from the slides. |
Specifications
| Feature | Detail |
|---|---|
| Model | 835-243 |
| Color | White |
| Material | Wood Melamine |
| Overall Dimensions (L x W x H) | 80 cm x 39.5 cm x 183.5 cm |
| Upper Module Dimensions (L x W x H) | 77 cm x 23 cm x 53 cm |
| Open Shelf Dimensions (L x W x H) | 76.8 cm x 38 cm x 48.5 cm |
| Internal Drawer Dimensions (L x W x H) | 32.75 cm x 33.7 cm x 12.1 cm (each) |
| Lower Right Module Dimensions (L x W x H) | 38 cm x 37 cm x 74.1 cm |
| Distance from Ground | 6 cm |
| Maximum Load Capacity (Total) | 80 kg |
| Maximum Load Capacity (Shelf) | 5 kg |
| Maximum Load Capacity (Drawer) | 5 kg |

User Tips
- When assembling, lay out all parts and hardware in an organized manner to speed up the process.
- Use a power drill with appropriate torque settings for screws, but finish tightening by hand to avoid stripping.
- Consider using felt pads under the feet if placing on delicate flooring to prevent scratches.
- For optimal stability, always place heavier items in the lower sections of the cabinet.
Warranty and Support
For any questions regarding assembly, missing parts, or product defects, please contact the seller or manufacturer directly. Keep your purchase receipt and this manual for reference. Do not attempt to modify the product, as this may void your warranty and pose safety risks.