YzzYzz WiFi Touch Switch

Contents

YzzYzz Smart WiFi Touch Switch User Manual

Model: WiFi Touch Switch

Introduction

The YzzYzz Smart WiFi Touch Switch offers advanced control over your home lighting, combining touch functionality with smart features. This switch supports both WiFi and RF433MHz connectivity, allowing control via smartphone apps (Tuya Smart/Smart Life), voice commands through Alexa and Google Home, and traditional RF remote controls. It features a sleek tempered glass panel, soft backlight, and is designed for easy installation in various electrical setups, including those without a neutral wire.

Key Features:

  • App Remote Control: Control your lights from anywhere using the Tuya Smart or Smart Life app.
  • Voice Control: Compatible with Amazon Alexa and Google Home for hands-free operation.
  • Timed Settings: Schedule lights to turn on/off automatically.
  • Sharing and Group Control: Share device access with family members and control multiple switches together.
  • Smart Scenarios: Create custom scenarios for automated actions based on your routines.
  • RF433MHz Compatibility: Can be controlled by a 433MHz RF transmitter.
  • No Neutral Wire Option: Supports single live wire installation, making it suitable for older homes.
  • Safety & Certification: Constructed with fire-resistant materials and tempered glass for protection.

Safety Information

  • Always turn off power at the circuit breaker before installing, removing, or servicing the switch.
  • Installation should be performed by a qualified electrician if you are unsure.
  • Do not exceed the maximum load current of 10A or total power of 1000W.
  • Ensure proper wiring connections as per the diagrams to prevent electrical hazards.
  • This switch is designed for indoor use only.
  • Keep the device away from water and excessive humidity.

Specifications

AttributeValue
Current10A
MaterialPC + Toughened Glass Panel
Switch TypeTouch On/Off Switch
Warranty1 year
Item TypeSWITCHES
Features1/2/3 Gang WiFi Touch Switch
Is Smart DeviceYes
OriginMainland China
CertificationRoHS, CE
WiFi StandardIEEE 802.11bgn 2.4GHz
RF Receiver433MHz
Control ModeApp / 433MHz RF / Manual
Size118mm x 72mm x 39mm (8mm panel thickness)
Voice Control CompatibilityAlexa / Google Home
AppTuya / Smart Life
AC Voltage100V-240V 60HZ/50HZ
WiringSingle Live Wire (No Neutral Wire required)
Max. Power0-1000W/total

Setup & Installation

1. Wiring Instructions

The YzzYzz Smart WiFi Touch Switch supports both Live & Neutral wire and Single Live Wire (no neutral wire) configurations. Always ensure power is OFF at the circuit breaker before beginning installation.

Wiring diagrams for Live & Neutral and Single Live Wire setups

Figure 1: Wiring Diagrams for Live & Neutral (left) and Single Live Wire (right) configurations.

  • Live & Neutral Wire: Connect the Live (L) and Neutral (N) wires from your electrical box to the corresponding terminals on the switch. Connect the light control wire (L1) to the switch.
  • Single Live Wire (No Neutral Wire): Connect the Live (L) wire from your electrical box to the switch. Connect the light control wire (L1) to the switch. A capacitor MUST be connected to the L and N terminals of the L1 lamp (light fixture), NOT behind the switch. This is crucial for proper operation in a single live wire setup.

2. Mounting Box Compatibility

The switch is compatible with both American and European standard mounting boxes.

Image showing compatibility with American and European mounting boxes

Figure 2: Mounting box compatibility.

3. Bulb Compatibility

  • The L1 terminal only supports LED lamps and tungsten lamps.
  • L1 does NOT support fluorescent lamps or energy-saving lamps. If you need to install fluorescent or energy-saving lamps, use terminals L2/L3/L4.
  • The switch does not have dimming functionality, regardless of whether a dimmable bulb is connected. It only controls on/off states.

4. Pairing Methods

The switch supports both RF433MHz pairing and WiFi pairing for smart control.

Video 1: Demonstration of RF and WiFi pairing methods for the smart switch.

RF Pairing Method

  1. To Pair: Long press the touch button on the smart switch until the blue backlight flashes once. Then, press the corresponding button on your RF433MHz remote control. The light will turn on, indicating successful pairing.
  2. To Delete RF Code: Long press the touch button on the smart switch until the blue backlight flashes twice. Then, press the corresponding button on your RF433MHz remote control. The light will turn off, indicating the RF code has been deleted.
Image showing RF433 remote control pairing with the smart switch

Figure 3: RF433 Remote Control Pairing.

WiFi Pairing Method (Tuya Smart / Smart Life App)

  1. Download and install the "Tuya Smart" or "Smart Life" app from your smartphone's app store.
  2. Register or log in to your account.
  3. Open the app and tap "Add Device" or the "+" icon.
  4. Select "Electrical" then "Light Source (Wi-Fi)" or similar lighting device type.
  5. Reset the device: Turn the device on, off, on, off, and on until the indicator blinks or breathes rapidly. Confirm the indicator is blinking rapidly in the app.
  6. Select your 2.4GHz Wi-Fi network and enter the password. (Note: 5GHz Wi-Fi is not supported).
  7. The app will begin searching for and adding the device. Once added, you can rename the switch and control it via the app.

Operating Instructions

1. Manual Touch Control

Simply touch the designated areas on the glass panel to turn the connected lights on or off.

2. App Control

After successful WiFi pairing, use the Tuya Smart or Smart Life app to control your lights from anywhere.

Screenshot of the app control interface for the smart switch

Figure 4: App Control Interface.

3. Voice Control

Integrate your switch with Amazon Alexa or Google Home for convenient voice commands.

User interacting with Alexa to control lights via the smart switch

Figure 5: Voice Control with Alexa/Google Home.

4. Timed Settings & Schedules

Use the app to set schedules or timers for your lights to automate their on/off times.

App interface showing timing and scheduling options for the smart switch

Figure 6: Timing and Scheduling.

5. Device Sharing & Group Control

Share control of your smart switch with family members through the app. You can also group multiple switches to control them simultaneously.

Image illustrating device sharing among family members using the app

Figure 7: Device Sharing.

6. Smart Scenarios

Create custom scenarios within the app to trigger actions based on specific conditions or modes (e.g., "Leave Home Mode" to turn off all lights, AC, and TV).

Image depicting 'Leave Home Mode' scenario with smart switch

Figure 8: Smart Scenario - Leave Home Mode.

Images depicting 'Sleep Mode' and 'Theater Mode' scenarios with smart switch

Figure 9: Smart Scenarios - Sleep Mode and Theater Mode.

7. RF Remote Control

If paired with an RF433MHz remote, you can control the switch wirelessly within a range of up to 15 meters.

Image showing RF433 remote control in use with the smart switch

Figure 10: RF Remote Control.

Maintenance

  • To clean the glass panel, gently wipe it with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Ensure the switch is powered off before cleaning to avoid accidental activation or electrical shock.
  • Regularly check for any loose connections or signs of wear.

Troubleshooting

  • Switch not responding to touch: Ensure the power is on. If using a single live wire, verify the capacitor is correctly installed at the lamp.
  • WiFi connection issues: Make sure your Wi-Fi network is 2.4GHz. Ensure the switch is within range of your router. Try resetting the device and re-pairing via the app.
  • RF remote not working: Check the remote's battery. Ensure the RF code is correctly paired with the switch. The control range is approximately 15 meters; ensure you are within this range.
  • Light flickering or not turning off completely (single live wire): This often indicates an issue with the capacitor installation or an incompatible bulb. Double-check the capacitor connection at the lamp. Ensure the bulb connected to L1 is LED or tungsten.
  • No dimming function: This switch does not support dimming. It is designed for on/off control only.

User Tips

  • For single live wire installations, the capacitor is essential for stable operation and to prevent flickering. Install it directly at the light fixture (L1 lamp) between the Live and Neutral connections.
  • If you experience difficulty with RF pairing, ensure you follow the long-press sequence precisely for pairing (one flash) or deleting (two flashes) before pressing the remote button.
  • The switch is both Wi-Fi and RF compatible, offering flexible control options. You can use both methods simultaneously.

Warranty & Support

This product comes with a 1-year warranty from the date of purchase. For technical support, troubleshooting assistance, or warranty claims, please contact the seller or refer to the official product support channels.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.