konsenda H120-C6

Contents

User Manual: 4K 120M HDMI KVM Extender

Model: H120-C6 | Brand: konsenda

1. Introduction

The konsenda H120-C6 HDMI KVM Extender is designed to extend HDMI video, USB, audio, and IR signals over a single CAT5e/6 Ethernet cable. This device allows for high-definition video transmission up to 120 meters at 4K*2K resolution, overcoming the limitations of standard HDMI cable lengths. It provides a flexible and convenient solution for various applications, including HDTV retail and show sites, data center control, multimedia classrooms, and conference room presentations.

Key Benefits:

  • Extended Transmission: Utilizes readily available CAT5e/6 cables for long-distance signal extension, offering greater flexibility in installation compared to fixed-length HDMI cables.
  • Ease of Installation: CAT5e/6 cables are easier to route through walls and conduits due to their smaller connectors and flexibility.
  • Cost-Effective: Eliminates the need for expensive, custom-length HDMI cables for distances over 10 meters.

2. Important Safety Information

Please read and follow these safety guidelines before using the product to prevent damage and ensure safe operation:

  • Do not expose the equipment to rain, fire, or liquids.
  • Do not insert any objects into the device.
  • Do not attempt to repair the equipment or open its casing without professional assistance.
  • Ensure adequate ventilation to prevent overheating and potential damage to the product.
  • Verify device compatibility before connecting and using the extender.
  • Always power off all connected devices and the extender units before installation to ensure electrical safety.

3. Package Contents

The package should contain the following items:

  • 1 x HDMI KVM Extender Transmitter (Sender)
  • 1 x HDMI KVM Extender Receiver (Receiver)
  • 2 x Power Adapters (DV-5V)
  • 1 pair of IR Cables (IR Transmitter and IR Receiver)
  • 1 x USB Cable (Type A to Type B)
  • 1 x User Manual (This document)
Package contents including Sender, Receiver, power adapters, IR cables, and USB cable.

Figure 1: Package Contents

4. Features

The konsenda H120-C6 HDMI KVM Extender offers a range of features for superior performance:

  • Operates as a full functional module, requiring no complex setup.
  • Extends HDMI signals up to 120 meters using a single CAT5e/6 cable.
  • Complies with IEEE-568B standard for CAT5e/6 cabling.
  • Supports video resolutions up to 4K*2K@30Hz (with 120 meters CAT6 cable).
  • Compact and space-saving design.
  • Supports signaling rates up to 3.4Gbps for 4K*2K display.
  • HDCP compliant.
  • Supports uncompressed audio formats such as LPCM.
  • Supports compressed audio formats including DTS Digital, Dolby Digital (DTS-HD and Dolby true HD).
  • Sender unit features HDMI output (loop-out), audio output, and IR output.
  • Receiver unit features HDMI output, audio output, and IR input.
Features of the KVM Extender including 120M Long Distance, Audio Separation, KVM Function, Local Output, and IR Transmitter.

Figure 2: Key Features

5. Product Overview (Ports and Indicators)

Familiarize yourself with the ports and indicators on both the Sender and Receiver units:

Detailed view of the Sender and Receiver units with all ports labeled: DV-5V, Power HDMI OUT, HDMI IN, Audio, IR-TX, PC-USB, RJ45, Link, Con on Sender; DV-5V, Power HDMI OUT, Audio, IR-RX, USB out, RJ45, Link, Con on Receiver.

Figure 3: Sender and Receiver Interface Diagram

Sender Unit:

  • DV-5V: Power input port (5V DC).
  • Power HDMI OUT: HDMI loop-out port for connecting a local display.
  • HDMI IN: HDMI input port for connecting the source device.
  • Audio: 3.5mm audio input port.
  • IR-TX: Infrared transmitter output port for controlling the source device.
  • PC-USB: USB Type B port for connecting to the source computer for KVM functionality.
  • RJ45 (Link/Con): Ethernet port for connecting to the Receiver unit via CAT5e/6 cable. "Link" and "Con" indicators show connection status.

Receiver Unit:

  • DV-5V: Power input port (5V DC).
  • Power HDMI OUT: HDMI output port for connecting the remote display.
  • Audio: 3.5mm audio output port.
  • IR-RX: Infrared receiver input port for receiving IR signals from a remote control.
  • USB out: USB Type A ports for connecting USB peripherals (e.g., keyboard, mouse).
  • RJ45 (Link/Con): Ethernet port for connecting to the Sender unit via CAT5e/6 cable. "Link" and "Con" indicators show connection status.

6. Setup Instructions

Follow these steps to set up your HDMI KVM Extender:

Product Connection Diagram showing various input sources like PC, PS3/4, Set-top box, Notebook, DVD connected to the Sender, and output devices like Monitor, TV, Projector, Headset, Sound System connected to the Receiver via a Cat6 network cable.

Figure 4: General Connection Diagram

  1. Connect HDMI Source to Sender: Use an HDMI cable to connect your source device (e.g., PC, PS4/5, Set-top box, DVD, Notebook) to the HDMI IN port on the Sender unit.
  2. (Optional) Local Display Connection: If you require a local display near the source, connect an HDMI cable from the Power HDMI OUT (Loop-out) port on the Sender unit to your local television or monitor.
  3. (Optional) Audio Input to Sender: If desired, connect a 3.5mm audio cable from your audio source to the Audio input port on the Sender unit.
  4. Connect PC-USB for KVM: Use the provided USB cable to connect the PC-USB port on the Sender unit to a USB port on your source computer. This enables KVM functionality.
  5. Connect Sender to Receiver via Ethernet: Connect a single CAT5e/6 Ethernet cable (up to 120 meters) between the RJ45 port on the Sender unit and the RJ45 port on the Receiver unit. Ensure the cable is properly terminated according to IEEE-568B standards.
  6. Connect Remote Display to Receiver: Use an HDMI cable to connect your remote display (e.g., monitor, television, projector) to the Power HDMI OUT port on the Receiver unit.
  7. (Optional) Audio Output from Receiver: If desired, connect a 3.5mm audio cable from the Audio output port on the Receiver unit to your audio output device (e.g., headset, sound system, mixer, power amplifier).
  8. Connect USB Peripherals to Receiver: Connect your USB keyboard and mouse to the USB out ports on the Receiver unit.
  9. Connect Power Adapters: Connect the two included 5V power adapters to the DV-5V ports on both the Sender and Receiver units, then plug them into power outlets.
  10. Power On: Ensure all connections are secure, then power on all connected devices and the KVM extender units. The "Link" and "Con" indicators on both units should illuminate, indicating a successful connection.
Connection diagram showing a laptop, PS4/5, TX Box, and PC connected to the Sender, which then connects to the Receiver. The Receiver outputs to a TV, monitor, or projector.

Figure 5: Example Connection for Various Sources and Displays

7. Operating Instructions

Once the setup is complete and all devices are powered on:

  • The video and audio from your source device will be displayed on the remote monitor/TV/projector and output through the connected audio devices.
  • If a local display is connected to the Sender's loop-out port, it will mirror the content shown on the remote display.
  • Use the keyboard and mouse connected to the Receiver unit to control the computer connected to the Sender unit.

IR Remote Control Functionality:

The extender supports IR pass-through, allowing you to control your source device from the remote display location.

  1. Connect the IR Transmitter cable to the IR-TX port on the Sender unit. Position the IR emitter head near the IR receiver window of your source device (e.g., DVD player, set-top box).
  2. Connect the IR Receiver cable to the IR-RX port on the Receiver unit. Position the IR receiver head in a location where it can easily receive signals from your remote control.
  3. Point your original remote control at the IR Receiver head connected to the Receiver unit. The signals will be transmitted back to the Sender and then to your source device, enabling remote control.
Diagram illustrating IR Pass Through, showing an IR transmitter connected to the Sender near a DVD player, and an IR receiver connected to the Receiver, allowing a remote control to operate the DVD player from the display location.

Figure 6: IR Pass Through Setup

Close-up image of the IR-TX port on the Sender and IR-RX port on the Receiver, indicating where to connect the infrared cables.

Figure 7: IR Port Locations

KVM Functionality:

The KVM (Keyboard, Video, Mouse) feature allows you to control a remote computer using a keyboard and mouse connected to the Receiver unit.

  • Ensure the PC-USB port on the Sender is connected to your computer.
  • Connect your USB keyboard and mouse to the USB out ports on the Receiver.
  • You can now operate your computer from the remote location as if you were directly connected.
Image showing a keyboard and mouse connected to the USB ports of the Receiver unit, demonstrating remote control of a computer.

Figure 8: Remote Keyboard and Mouse Connection

8. Troubleshooting

If you encounter issues, please refer to the following troubleshooting steps:

  • No Video or Audio Output:
    • Check all HDMI and audio cable connections to ensure they are secure.
    • Verify that both the Sender and Receiver units are powered on and their respective "Link" and "Con" indicators are lit.
    • Ensure the CAT5e/6 Ethernet cable is properly connected and not damaged. Try a different cable if possible.
    • Confirm that the remote display is set to the correct HDMI input source.
    • Test with a shorter CAT6 cable if available to rule out cable length or quality issues.
  • KVM (Keyboard/Mouse) Not Working:
    • Ensure the USB cable is connected from the PC-USB port on the Sender to your source computer.
    • Check that the keyboard and mouse are securely connected to the USB out ports on the Receiver.
    • Try connecting the keyboard and mouse directly to the computer to confirm they are functional.
  • IR Remote Control Not Functioning:
    • Verify that the IR Transmitter and IR Receiver cables are correctly plugged into the IR-TX and IR-RX ports, respectively.
    • Ensure the IR emitter head is positioned directly in front of the source device's IR receiver window.
    • Confirm the IR receiver head is placed in a clear line of sight for your remote control.
    • Test the remote control directly with the source device to ensure it is working.
  • Intermittent Signal or Poor Video Quality:
    • Use a high-quality CAT6 Ethernet cable for optimal performance, especially over longer distances.
    • Ensure the Ethernet cable is not excessively bent, kinked, or damaged.
    • Check for potential electromagnetic interference (EMI) from other electronic devices.

9. Specifications

FeatureSpecification
Brand Namekonsenda
Model NumberH120-C6
TypeHDMI-Compatible Cables (Extender)
Outer Diameter5mm
Connector AUSB, AUX (3.5mm Audio), HDMI-Compatible
Connector BRJ-45, USB, AUX (3.5mm Audio), HDMI-Compatible
GenderFemale
ApplicationComputer, Microphone, Multimedia, Monitor, Projector, Television, TV box, Amplifier
CertificationCE, RoHS
OriginMainland China
Max Resolution4K*2K@30Hz
Transmission DistanceUp to 120 meters (using CAT6 cable)
Signaling Rate3.4Gbps
HDCP SupportYes
Audio FormatsLPCM, DTS Digital, Dolby Digital (DTS-HD, Dolby true HD)
Power SupplyDV-5V (via included adapters)
Package TypeCarton Box
Image highlighting 4K@30Hz Full HD Resolution support, high compatibility, and lossless no delay transmission.

Figure 9: High Resolution and Performance

10. User Tips

Based on general usage and product characteristics, here are some tips for optimal performance:

  • For best video quality and stable transmission, especially over longer distances, always use high-quality CAT6 Ethernet cables.
  • Ensure that the power adapters are connected to both the Sender and Receiver units, as they require external power for operation.
  • When using the KVM function, ensure your computer's USB drivers are up-to-date if you experience any issues with keyboard or mouse recognition.
  • Avoid running the Ethernet cable near strong electromagnetic interference sources to prevent signal degradation.

11. Warranty and Support

Specific warranty information for this product is not provided in the available documentation. For warranty claims, technical support, or further assistance, please contact the retailer or manufacturer directly.

A detailed user manual in PDF format is available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.