SMTAV TXE038

Contents

SMTAV TXE038 RJ45 Ethernet PoE Switch User Manual

5-Port 10/100/1000Mbps Desktop PoE Switch

1. Introduction

The SMTAV TXE038 is a 5-port 10/100/1000Mbps Desktop PoE Switch designed to provide seamless network connectivity. Its Power over Ethernet (PoE) ports automatically detect and supply power to IEEE 802.3at/af compliant Powered Devices (PDs). This allows for network expansion in areas lacking power lines or outlets, ideal for devices such as Access Points (APs), IP Cameras, or IP Phones. The switch also features VLAN isolation for enhanced security monitoring and an independent uplink port to manage high traffic efficiently, ensuring an unobstructed upstream channel.

The TXE038 is designed for ease of use, requiring no complex configuration or installation. Its compact desktop design, combined with outstanding performance and quality, makes it an excellent choice for expanding your home or office network.

2. Features

  • Complies with IEEE802.3, IEEE802.3i, IEEE 802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3az, IEEE802.1q Ethernet standards.
  • Supports IEEE802.3af and IEEE802.3at PoE standards.
  • Provides PoE power up to 30W for each PoE port, with a total power budget of up to 60W.
  • Features VLAN isolation to meet security monitoring requirements.
  • Equipped with 5 x 10/100/1000Mbps Auto-negotiation RJ45 ports, with PoE function on ports 1-4.
  • Independent uplink port ensures smooth handling of sudden high traffic and an unobstructed upstream channel.
  • Supports IEEE802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode.
  • Includes a 2K entry MAC address table with auto-learning and auto-aging capabilities.
  • LED indicators for monitoring Port Link / Activity and device status.
  • External power supply, exquisite design, suitable for desktop or wall-hanging installation.

3. Setup

3.1 Package Contents

Before installation, please verify the contents of your package:

  • SMTAV TXE038 PoE Switch
  • Power Adapter (DC 52V, 1.25A)
  • User Manual (this document)
Diagram showing the contents of the product package, including the PoE switch, power adapter, and manual.
Figure 1: Package Contents

3.2 Physical Placement

The TXE038 switch is designed for desktop or wall-hanging installation. Choose a location that is:

  • Within the specified operating temperature range (0℃~45℃).
  • Within the specified operating humidity range (10%~90% non-condensing).
  • Away from direct sunlight, heat sources, and excessive moisture.
  • Well-ventilated to prevent overheating.

3.3 Connecting the Power Adapter

  1. Connect the DC plug of the provided power adapter (DC 52V, 1.25A) to the DC power input port on the switch.
  2. Plug the other end of the power adapter into a standard electrical outlet.
  3. Verify that the 'PW' (Power) LED on the switch illuminates, indicating that the device is receiving power.

3.4 Connecting Network Devices

The switch features 5 RJ45 ports. Ports 1-4 support Power over Ethernet (PoE), while the 'Uplink' port is typically used for connecting to your main network infrastructure (e.g., router, NVR).

Diagram of the PoE switch front panel, showing the power input, Uplink port, PoE ports 1-4, and LED indicators for PW, VLAN, Uplink, PoE, and Link/Act.
Figure 2: Switch Front Panel and Indicators
  1. Connect to Main Network: Use a standard Ethernet cable (UTP category 5 or 5e recommended for Gigabit speeds) to connect your router, NVR, or main network switch to the 'Uplink' port on the TXE038.
  2. Connect PoE Devices: For PoE-compatible devices such as IP cameras, wireless access points, or IP phones, connect them to any of the PoE ports (ports 1-4) using standard Ethernet cables. The switch will automatically detect and provide power to these devices if they are IEEE 802.3at/af compliant.
  3. Connect Non-PoE Devices: You can also connect non-PoE network devices (e.g., computers, ordinary cameras) to ports 1-4. These devices will receive data connectivity but will not be powered by the switch.
Wiring diagram showing a PoE switch connected to an NVR video recorder, a router, a PoE camera, and two ordinary cameras, illustrating a typical network setup.
Figure 3: Typical Network Wiring Diagram

4. Operating the Switch

The SMTAV TXE038 is a plug-and-play device that operates automatically once connected. There is no software configuration required for basic network functionality.

4.1 LED Indicators

Monitor the status of the switch and connected devices using the front panel LEDs:

  • PW (Power) LED: Illuminates when the switch is powered on.
  • VLAN LED: Indicates the status of VLAN isolation. Refer to specific product documentation for detailed VLAN mode operation if applicable.
  • Uplink LED (Link/Act):
    • Solid Green: A valid network link is established on the Uplink port.
    • Flashing Green: Data activity is occurring on the Uplink port.
    • Off: No link or connection detected.
  • PoE LEDs (Ports 1-4): Illuminates when PoE power is being supplied to a connected device on that port.
  • Link/Act LEDs (Ports 1-4):
    • Solid Green: A valid network link is established on the corresponding port.
    • Flashing Green: Data activity is occurring on the corresponding port.
    • Off: No link or connection detected.

4.2 VLAN Isolation

The switch supports VLAN isolation, which can segment network traffic to enhance security, particularly useful in surveillance systems where IP cameras might be isolated from other network traffic. Consult the device's specific mode settings or documentation for activating and managing VLAN features.

4.3 Flow Control

The switch implements IEEE802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode. This mechanism helps prevent data loss during periods of high network traffic by regulating the data flow between devices.

5. Maintenance

To ensure optimal performance and longevity of your SMTAV TXE038 PoE Switch, follow these maintenance guidelines:

  • Cleaning: Keep the switch clean and free from dust. Use a soft, dry cloth for cleaning. Do not use liquid or aerosol cleaners.
  • Ventilation: Ensure that the ventilation openings on the switch are not blocked. Proper airflow is crucial to prevent overheating.
  • Environment: Operate the switch within the specified environmental conditions (temperature: 0℃~45℃, humidity: 10%~90% non-condensing). Avoid exposing the device to extreme temperatures, high humidity, or corrosive environments.
  • Power: Always use the provided power adapter. Disconnect power during electrical storms or when unused for long periods.

6. Troubleshooting

If you encounter issues with your SMTAV TXE038 PoE Switch, refer to the following common troubleshooting steps:

6.1 No Power

  • Ensure the power adapter is securely connected to both the switch and a working electrical outlet.
  • Check if the 'PW' LED on the switch is illuminated. If not, try a different power outlet.
  • Verify that the power adapter is the correct one supplied with the device (DC 52V, 1.25A).
  • Check the Ethernet cable connection between the switch port and the connected device. Ensure both ends are securely plugged in.
  • Try using a different Ethernet cable to rule out a faulty cable.
  • Verify that the connected device is powered on and functioning correctly.
  • Ensure the correct port is being used (e.g., Uplink for router, PoE ports for PoE devices).

6.3 PoE Device Not Powering On

  • Confirm that the connected device is IEEE 802.3at/af compliant. Non-PoE devices will not receive power.
  • Check the PoE LED for the corresponding port. If it's not illuminated, the switch is not delivering power.
  • Ensure the total power consumption of all connected PoE devices does not exceed the switch's PoE budget (60W). If exceeded, some devices may not power on.
  • Try connecting the PoE device to a different PoE port on the switch.

6.4 Slow Network Speed

  • Ensure you are using appropriate Ethernet cable categories. For 100/1000Mbps speeds, UTP category 5 or 5e cables are recommended.
  • Check for excessive network traffic or bottlenecks elsewhere in your network.
  • Verify that the Link/Act LEDs are indicating the expected speed (e.g., green for Gigabit, amber for Fast Ethernet, if applicable).

7. Specifications

Category Specification
Model Name TXE038
Chipset MT7530DU+IP804A
Standards and Protocols IEEE802.3, IEEE802.3i, IEEE 802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3az, IEEE802.1q, IEEE802.3at, IEEE802.3af
Interface 5 x 10/100/1000Mbps Auto-Negotiation ports
Network Media 10Base-T: UTP category 3, 4, 5 cable (maximum 100m)
100Base-Tx: UTP category 5, 5e cable (maximum 100m)
1000Base-T: UTP category 5, 5e cable (maximum 100m)
Transfer Method Store-and-Forward
MAC Address Table 2K
Switching Capacity 10Gbps
Packet Forwarding Rate 7.44Mpps
PoE Ports (RJ45) 4* PoE ports compliant with 802.3at/af
Power Pin Assignment 1/2(+), 3/6(-)
PoE Budget 60W
Indicators Per Device: Power, VLAN
Per Port: Link/Activity
Power Supply DC 52V, 1.25A External Power
Power Consumption Maximum (PoE on): 63W (220V/50Hz)
Dimensions (W x D x H) 123*70*23mm
Operating Temperature 0℃~45℃
Storage Temperature -40℃~70℃
Operating Humidity 10%~90% non-condensing
Storage Humidity 5%~90% non-condensing
Diagram showing the dimensions of the PoE switch: 123mm length, 70mm width, and 23mm height.
Figure 4: Product Dimensions

8. User Tips

  • Power Adapter: Always ensure you are using the correct DC 52V, 1.25A power adapter supplied with the switch for proper operation and to avoid damage.
  • Cable Quality: For optimal network performance, especially at Gigabit speeds, use high-quality UTP Category 5 or 5e Ethernet cables.
  • LED Monitoring: Regularly check the LED indicators on the front panel to quickly assess the power status, network link, activity, and PoE power delivery for each port.
  • VLAN for Security: If using the switch in a security monitoring setup with IP cameras, leverage the VLAN isolation feature to segment camera traffic from the main network for enhanced security.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt and product serial number handy when seeking support.

9.1 Important Disclaimer

⚠️ Camera products (which may be connected to this switch) can only be used for purposes permissible under applicable laws and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

© 2024 SMTAV. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.