Veromount SP613E RGB / SP614E RGBW Bluetooth LED Music Controller Instruction Manual

1. Introduction

This manual provides detailed instructions for the Veromount SP613E RGB and SP614E RGBW Bluetooth LED Music Controllers. These controllers are designed to enhance your LED strip lighting experience with smart control options, music synchronization, and customizable effects. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance.

2. Features

• Dual Control Methods: Supports both smartphone APP control (Bluetooth-compatible) and IR remote control.
• Smart Connectivity: Automatic device connection and reconnection when the APP is opened.
• Group Control: Ability to control multiple devices simultaneously by creating groups within the APP.
• Music Synchronization: Multiple music collection modes including mobile microphone, player streaming, and on-board microphone for dynamic light effects.
• Customization: Modify device names, calibrate RGB channel sequences, and utilize timer functions.
• Diverse Effects: Built-in music and non-music effects with adjustable speed, brightness, and color.
• Wide Voltage Input: DC5-24V wide voltage input with anti-reverse connection protection.
• Parameter Memory: Automatic saving function for all setting parameters.
• DIY Modes: Four customizable DIY modes for personalized lighting.
• Pure White Output (SP614E only): The SP614E model supports RGBW LED strips and can output pure white light.

3. Specifications

4. Package Contents

The package includes the selected LED music controller (SP613E or SP614E) and an IR remote control. Please note that the remote control does not come with a battery.

5. Setup Instructions

Follow these steps for easy installation:

1. Connect LED Strip: Connect the pin outlet of the controller to your LED strip light. Ensure the correct polarity (e.g., + to + and - to -).
2. IR Receiver Placement: Ensure the IR receiver on the controller is visible and unobstructed for the remote control to function correctly.
3. Connect Power: Connect the power adapter to the controller. The controller supports DC5-24V. Ensure your power adapter's voltage matches your LED strip's requirements.
4. Activate Remote: If applicable, pull out the plastic insulation tab from the remote control's battery compartment before first use.

Wire Connections Diagram

6. Operating Instructions

6.1. APP Control

The SP613E/SP614E controllers can be controlled via a dedicated smartphone application, available for both iOS (version 10.0 or later) and Android (version 4.4 or later) devices.

1. Download App: Scan the QR code provided on the product packaging or in the detailed diagram to download and install the application.
2. Add Devices: Open the App. Click the "+" icon in the upper right corner of the homepage. You can add devices by scanning for available controllers or by manually creating a group for multiple added devices.
3. Individual Control: Click on an individual device in the device list to access its control page.
4. Group Control: Click on a group in the group list to enter the control page and control all devices within that group simultaneously.
5. Settings: To modify the device name or calibrate the RGB channel sequence, click the "..." icon in the upper right corner of the operation page.
6. Timer Function: Set up to five timing events by clicking the "..." icon. Note that all set timing events will be deleted if the controller is powered off.
7. Effects Page: Explore various music and non-music effects. Adjust speed, brightness, and color for specific effects.
8. Help: For more detailed information and help, click the "?" button in the top right corner of the app.

6.2. IR Remote Control Functions

The included 38-key IR remote control allows for direct operation of the LED strip lights.

• ON/OFF: Power on/off the LED lights.
• R, G, B, W: Select 15 static colors (W for white).
• Brightness Levels: Buttons for 75%, 50%, 25%, 10% white brightness.
• MODE < / >: Cycle through different lighting modes (Mode Minus / Mode Plus).
• HUE < / >: Adjust the hue (Hue Subtraction / Hue Plus).
• Music Mode (Note Icon): Activate and cycle through music synchronization modes (Music Mode Minus / Music Mode Plus).
• Speed (Clock Icon): Adjust the speed of dynamic effects (Speed Reduction / Speed Plus).
• Brightness (Sun Icon): Adjust the overall brightness of the lights (Brightness Reduction / Brightness Plus).
• Music Sensitivity (Speaker Icon): Adjust the sensitivity of the music synchronization (Music Sensitivity Reduction / Music Sensitivity Plus).
• DIY1-DIY4: Access four customizable DIY modes.

6.3. Control Box Button Functions

The physical control box features three buttons for basic operation:

• On/Off Button: Press to turn the LED lights on or off.
• Mode Button (M): Press to switch between different lighting effects.
• Speed Button (S): Press to adjust the speed of non-music lighting effects.

7. User Tips

• Power Adapter Compatibility: Ensure your power adapter's DC barrel jack size (commonly 2.1mm or 2.5mm) is compatible with the controller's input.
• Remote Battery: The remote control does not include a battery. Please insert a compatible battery before use.
• Voltage Matching: Always match the input voltage of the controller to the voltage requirements of your LED strip (e.g., do not use a 12V power supply for a 5V strip).
• Signal Strength: For optimal music sync effects, ensure the microphone (mobile or onboard) is close to the music source.
• Color Calibration: If the colors displayed on your LED strip do not match the selected colors (e.g., red appears green), use the app's calibration feature to adjust the RGB channel sequence.

8. Troubleshooting

• Lights Not Turning On:
  • Check all power connections to ensure they are secure.
  • Verify the power adapter is functioning and providing the correct voltage.
  • Ensure the remote control has a working battery and the plastic tab is removed.
• Remote Control Not Responding:
  • Ensure the remote is pointed directly at the IR receiver on the controller.
  • Check and replace the remote control battery if necessary.
  • Ensure there are no obstructions between the remote and the IR receiver.
• App Not Connecting:
  • Ensure Bluetooth is enabled on your smartphone.
  • Make sure the controller is powered on.
  • Try restarting the app and/or power cycling the controller.
  • Ensure your smartphone's operating system meets the minimum requirements (iOS 10.0+, Android 4.4+).
• Effects Appear Stuck or Lagging:
  • If the LED strip is long or has many LEDs, it might require additional power injection. Consider adding voltage to the LED strip at intervals to maintain consistent brightness and effects.
  • Ensure the power supply is sufficient for the total wattage of your LED strip.
• Incorrect Colors Displayed:
  • Use the app's RGB channel sequence calibration feature (found under the "..." icon on the device's control page) to correct color discrepancies.

9. Maintenance

To ensure the longevity and proper functioning of your LED music controller, follow these maintenance guidelines:

• Keep Dry: Protect the controller from moisture and water. Do not expose it to rain or humid environments.
• Clean Gently: Use a soft, dry cloth to clean the controller and remote. Avoid using harsh chemicals or abrasive materials.
• Avoid Extreme Temperatures: Operate and store the device within the recommended working temperature range of -20°C to 60°C.
• Proper Storage: When not in use for extended periods, store the controller in a cool, dry place.

10. Warranty and Support

For any issues, questions, or support needs regarding your Veromount LED Music Controller, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific warranty terms and contact information.