Breo Scalp Mini Pro Massager User Manual

1. Safety Precautions

Please read this User's Manual carefully before using this device to ensure safe and proper use. The company shall not be responsible for any consequences caused by improper use or non-compliance with the relevant instructions of this device.

• Do not use this device while driving.
• When using this device, please remove any accessories or items around the area of your body that may affect massage.
• Please keep the device away from fire and corrosive environments.
• Please follow safety regulations when you use the device in specific environments.
• Do not use the device if you have previously received surgery to the massage area.
• Do not use the device if you have any discomfort such as skin injury, swelling, inflammation and bruising to the massage area.
• Do not use the device if you have heart disease or a history of heart disease, acute disease, skin disease, malignant tumor or any other abnormal physical symptoms.
• Do not use the device if you have a blood disease or other bleeding tendency, osteoporosis, soft tissue disease or suffer strokes.
• Do not use the device if you are slow in motion, have physical and mental discomfort or are mentally handicapped. Please follow your doctor's advice if you need to use the device.
• Please stop using the device if you experience any discomfort during use.
• Pregnant or menstruating women should not use the massager.
• Children under the age of 6 are forbidden to use the device, and children between 6 and 12 should use the device under the guidance and care of their parents or guardians.
• If you need to clean the surface of the main device, wash it with water and dry it with a soft cotton cloth. If you need to clean the surface of the support base, clean it with alcohol-soaked cotton instead of water.
• Do not use sharp objects to scratch or poke the device.
• This device is a household electronic health care device. It is not intended to be used as a medical device and is not suitable for diagnosis, treatment and other commercial purposes.
• Please charge the device with the charging equipment provided by Breo, and pay attention to electrical safety.
• In the case of any abnormal occurrence when using the device, please cut off the power supply immediately. Do not disassemble the device and repair it by yourself.
• Do not immerse the charging dock in water or other liquids, and do not wash it under the faucet.
• The device has a heating surface. Those who are not sensitive to heat must be cautious when using the device.

2. Product Configuration & Features

2.1. What's in the Box

• Scalp Massager
• Charging Dock
• Storage Bag
• Magnetic Charging Cable
• General Charging Cable
• User's Manual (this document)

2.2. Key Features

• Kneading Massage: Features 96 soft silicone nodes and 4-shaft centrifugal kneading for gentle and balanced massage.
• Infrared Technology: Continuous output of 850nm infrared light wave for deep stimulation of scalp cell vitality and stabilization of hair roots.
• Waterproof Design: IPX7 waterproof rating allows use in shower or during bathing.
• Ergonomic & Portable: Comfortable hand grip, lightweight (215g), and compact size for easy carrying.
• Versatile Use: Can be used on the scalp and other body parts like neck, legs, back, and arms.

Figure 1: Multifunctional Scalp Massager Features

Figure 2: Customized Massage Areas

3. Operating Instructions

3.1. Power On/Off

• Power On: When the device is off, short-press the ON/OFF button to turn on the device. The default mode after startup is Mode 1 (Fast Mode).
• Power Off: Long-press the ON/OFF button to turn off the device.

3.2. Mode Selection

After powering on the device, short-press the ON/OFF button to switch between the available massage modes.

• Mode 1 (Fast Mode): Fast forward rotation. The indicator light flashes once and stays on. Far infrared is active.
• Mode 2 (Slow Mode): Slow forward rotation. The indicator light flashes twice and stays on. Far infrared is active.
• Mode 3 (Alternating Mode): Fast and slow forward rotation. The indicator light flashes three times and stays on. Far infrared is active.

3.3. Usage Timing

The device is set to work for 10 minutes at a time, after which the power supply will be automatically cut off.

3.4. Important Usage Notes

• The device cannot be used while charging. Please unplug the power adapter after charging is complete before use.
• When using the device, please adopt a comfortable position in which you can completely relax.
• Please remove ornaments including headdresses and hairpins, headphones, earrings, glasses, etc.
• If you feel pain or discomfort to your skin, please stop using the device and see a doctor immediately.

4. Charging

4.1. Charging Methods

There are two ways to charge your Breo Scalp Mini Pro Massager:

1. Using the Charging Dock:
   1. Place the device on the charging dock, ensuring a proper connection.
   2. Insert the micro USB connector of the USB cable into the micro USB socket of the charging dock.
   3. Plug the other end of the USB cable into a rechargeable USB port or an adapter plugged into a socket to recharge the device.
2. Using the Magnetic Charging Cable Directly:
   1. Connect the magnetic head of the magnetic charging cable to the charging contact of the device.
   2. Plug the other end of the magnetic charging cable into a rechargeable USB port or an adapter plugged into a socket to recharge the device.

4.2. Charging Indicators & Time

• When you charge the device, the indicator on the device panel will flash.
• After charging is completed, the charging indicator will be solid.
• It is normal for the host and power adapter to heat up slightly during charging.
• The charging period is about 2-3 hours. The device cannot be charged when it is in use. If you attempt to charge the device while it is in use, it will enter self-protection mode and stop working automatically.
• When fully charged, the device can be used 6 to 8 times for 15 minutes each time. (Usage time may vary according to the ambient temperature).
• The indicator will flash when the battery power is low.

Figure 3: Charging the Massager

5. Maintenance

5.1. Cleaning

• To clean the surface of the main device, wash it with water and dry it with a soft cotton cloth.
• To clean the surface of the support base, use an alcohol-soaked cotton cloth.
• Ensure the device is powered off before cleaning.

5.2. Storage

• If the storage period exceeds 3 months, unpack the product, and check and recharge it before use.
• Do not place the product tightly close to the floor, wall, or ceiling.
• The indoor environment should be well-ventilated; keep away from strong sunlight and corrosive gas.
• After use, put the device in a safe place; do not place any heavy objects on the device.

5.3. Transport

The product package is provided with simple shockproof measures, making it suitable for transport by air, rail, road, and sea. Keep away from rain and snow, and avoid inversion and collision.

6. Troubleshooting

Please perform the following checks in case of any failure occurring during operation. If the failure cannot be eliminated or the product still cannot work ideally, please cut off power supply and ask a professional technician to repair it. Never attempt to disassemble the product.

7. Specifications

Figure 4: Detailed Product Specifications

8. User Tips

• For optimal results, use the massager on a clean scalp.
• Experiment with different modes (Fast, Slow, Alternating) to find what feels best for you.
• The waterproof design allows for use during hair washing, which can help distribute shampoo and deeply cleanse the scalp.
• Regular use can help improve blood circulation and reduce tension in the scalp and other massaged areas.
• Always ensure the device is fully charged before extended use to avoid interruptions.

9. Warranty & Support

The Breo Scalp Mini Pro Massager comes with a 12-month warranty.

If you encounter any issues that cannot be resolved using the troubleshooting guide, or for any other support inquiries, please contact Breo customer service:

• Customer Service Hotline: 400-830-9700
• Email: support@breocare.com
• Website: www.breocare.com
• Manufacturer: Shenzhen Breo Technology Co., LTD
• Address: 19/F, Hisense Southern Building, No.1777 Chuangye Road, Yuehai Street, Nanshan District, Shenzhen 518054, China

Battery Removal Steps (for disposal):

Warning: Except professionals, no one shall attempt to remove the battery!

1. Cut off the external power supply, and remove the product housing.
2. Disconnect the power supply to the battery.
3. Remove the battery.
4. Place the waste battery at a fixed recycling station.
5. Please observe local environmental protection laws and waste disposal guidance and protect the environment.

Notes:

• Remove the battery out of the appliance before scrapping the appliance.
• The appliance must be disconnected from power supply before removing the battery.
• The battery should be disposed of safely.