1. Introduction
This manual provides instructions and specifications for the DNVYUAX WEAH series of audio speaker frequency dividers, including models WEAH-228 (2-Way), WEAH-305 (3-Way), and WEAH-2606 (2-Way). These modules are designed for DIY speaker projects to separate audio signals into different frequency ranges (treble, bass, and for 3-way, also mediant) for optimal sound reproduction through dedicated speaker drivers.
The WEAH series crossovers feature robust construction with large skeleton inductors and high-quality capacitors, ensuring clear sound and high power handling capabilities.
2. Safety Warnings
- Avoid Water: These devices are not water resistant. Exposure to water or moisture can cause damage and electrical hazards.
- Do Not Disassemble: Do not attempt to disassemble or modify the frequency divider by non-professionals. Improper handling can lead to damage or injury.
- Professional Installation Recommended: If you are unsure about wiring or installation, seek assistance from a qualified audio technician.
- Power Off Before Wiring: Always ensure that all audio equipment (amplifier, speakers) is powered off and disconnected from the mains before making any wiring connections to the frequency divider.
3. Product Overview
The WEAH frequency dividers are designed to enhance your audio experience by directing specific frequency ranges to the appropriate speaker drivers. This results in a more balanced and detailed sound output.
Video: Overview of WEAH Audio Speaker Frequency Dividers, showcasing different models and their components.
Models at a Glance:
Image: A composite view of the WEAH-228, WEAH-305, and WEAH-2606 frequency divider boards.
4. Specifications
The following table details the specifications for each model:
| Feature | WEAH-228 (2-Way) | WEAH-305 (3-Way) | WEAH-2606 (2-Way) |
|---|---|---|---|
| Type | HiFi Audio Crossover (High & Low Frequency) | HiFi Audio Crossover (High, Medium & Low Frequency) | High-Power Stages Speaker Crossover (High & Low Frequency) |
| Power | 180W | 150W | 400W |
| Impedance | 4-8 ohms | 4-8 ohms | 4-8 ohms |
| Crossover Point | 2900Hz | Medium-High 4000Hz / Medium-Low 900Hz | 3200Hz |
| Material | PCB, Metal, ABS | ||
| Dimensions (Approx.) | 86x64x26 mm (3.38x2.51x1.02 inch) | 85x62x30 mm (3.34x2.44x1.18 inch) | 144x94 mm (5.67x3.70 inch) |
| Water Resistance Level | Not water resistant | ||
| Origin | Mainland China | ||
Detailed Dimensions:
5. Setup and Installation
Proper wiring is crucial for the correct functioning of the frequency divider and optimal sound quality. Always ensure all equipment is powered off before making connections.
Component Identification:
Wiring Diagrams:
The frequency divider acts as an intermediary between your amplifier and speakers. Connect the amplifier output to the input terminals of the frequency divider, and then connect the corresponding output terminals (Bass, Treble, Mediant) to your speaker drivers.
General Wiring Steps:
- Identify the input terminals on the frequency divider (usually marked 'INPUT' or with '+' and '-' symbols).
- Connect the positive (+) output from your amplifier to the positive (+) input terminal of the frequency divider.
- Connect the negative (-) output from your amplifier to the negative (-) input terminal of the frequency divider.
- Identify the output terminals for your speaker drivers (e.g., 'BASS' for woofer, 'TREBLE' for tweeter, 'MEDIANT' for midrange).
- Connect the positive (+) output for 'BASS' to the positive (+) terminal of your woofer speaker.
- Connect the negative (-) output for 'BASS' to the negative (-) terminal of your woofer speaker.
- Repeat for 'TREBLE' (and 'MEDIANT' if applicable) outputs to their respective speaker drivers.
- Ensure all connections are secure and polarity is correct to avoid phase issues and damage.
6. Operating Instructions
The WEAH frequency divider is a passive component and does not require external power or active controls. Once correctly wired into your speaker system, it operates automatically to filter audio signals.
- After completing all wiring, double-check connections for correctness and security.
- Power on your amplifier and audio source.
- Start with a low volume level and gradually increase it, listening for clear sound from all speaker drivers.
- The frequency divider will automatically direct the appropriate frequencies to your connected woofers, tweeters, and mid-range speakers (for 3-way models).
7. Maintenance
These frequency dividers are designed for durability and require minimal maintenance.
- Cleaning: Use a dry, soft cloth to gently wipe the surface of the board. Do not use liquid cleaners or solvents.
- Environment: Keep the device in a dry, dust-free environment. Avoid extreme temperatures and direct sunlight.
- Inspection: Periodically check wiring connections to ensure they remain secure.
8. Troubleshooting
If you encounter issues, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from a speaker driver (e.g., tweeter or woofer) | Loose or incorrect wiring connection to that driver. | Check the wiring from the frequency divider's output to the specific speaker driver. Ensure polarity is correct. |
| Distorted or poor sound quality | Incorrect wiring, incompatible speaker drivers, or damaged components. | Verify all wiring connections. Ensure speaker impedance matches the crossover's recommended range. Inspect the crossover board for any visible damage. |
| No sound from any speaker | Incorrect input wiring from the amplifier, amplifier issue, or complete system failure. | Check the input connections from the amplifier to the frequency divider. Test the amplifier and speakers independently if possible. |
9. User Tips
- Verify Capacitor Values: Some users have noted discrepancies in capacitor values on certain boards. If you experience unexpected sound characteristics, it may be beneficial to verify the capacitor values against standard crossover designs or expected performance.
- WEAH-228 Performance: The WEAH-228 model is frequently praised for its good bass and treble output, especially when used with a suitable amplifier board.
- Secure Packaging: While the product itself is generally well-regarded, some users have reported issues with packaging during shipping. Consider adding extra protection if you are concerned about transit damage.
10. Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the manufacturer or seller directly. Refer to your purchase documentation for specific contact information.
Manufacturer: Shenzhen Chiyi Technology Co., Ltd
Email/Tel: smtsykj@163.com / 17722493418
Address: 401-43, Buildings 2 and 3, M-10, Maqueling Industrial Zone, Maling Community, Yuehai Street, Nanshan District, Shenzhen
For general inquiries, you may also refer to the official product page or video resources provided by the seller.