1. Introduction
Thank you for purchasing the XIEGU G106C G106 5W HF Transceiver. This manual provides essential information for the safe and effective operation of your device. The G106C is a portable 5-watt QRP (low power) HF transceiver featuring a general coverage receiver from 0.55-30 MHz. It supports SSB, CW, and AM transmit capabilities across the 80 to 10 meter amateur radio bands, including WARC bands. Additionally, it offers Wide FM (WFM) reception in the broadcast FM band (88-108 MHz).
The G106C is built on an advanced SDR (Software Defined Radio) architecture with 16-bit sampling, ensuring superior performance. It includes a digital CW filter with three selectable bandwidths to enhance signal reception and combat interference. For digital modes like FT8, the transceiver can be connected to a PC using the optional external DE-19 digital adapter. As an entry-level portable SDR transceiver, the G106C is an excellent choice for exploring amateur radio bands with various modes.

2. Safety Warnings
Before using this product, please read and comply with all safety instructions to prevent damage or injury.
2.1 Electrical Safety
- Use only the power adapter provided with the product or a compliant power supply.
- Do not use in humid environments unless the product specifically states a waterproof rating.
- If the power cord is damaged, do not continue to use it. Contact support for a replacement.
- Always disconnect the power before cleaning.
2.2 Usage Environment
- Operating temperature range: -10°C to 40°C (subject to model specifications).
- Avoid direct sunlight, high temperatures, and dusty environments.
- Ensure good ventilation and do not block heat dissipation holes.
2.3 Operational Safety
- Do not disassemble or modify the product yourself, as there are no user-repairable parts inside.
- Prevent liquid from entering the product interior.
- If the product emits smoke, unusual odors, or abnormal noise, immediately disconnect the power and contact after-sales service.
3. Setup
3.1 Unpacking Inspection
After opening the package, please check that all items are complete:
- 1 x G106 transceiver
- 1 x Handheld microphone
- 1 x Power cord
- 1 x English manual
If you find any items missing or damaged, please contact customer service immediately.
3.2 Initial Power and Connections
Before first use, ensure the product is fully charged (if applicable) or connected to a stable power source. Check that the power supply voltage is consistent with the product specifications (9-15V DC).


- ANT: Connect your HF antenna to this BNC connector. Ensure proper grounding.
- KEY: Connect your CW keyer here.
- COM: This is a serial port for computer control or firmware updates.
- ACC: Accessory port for external devices.
- DC IN 9-15V: Connect the provided power cord to a 9-15V DC power source.
4. Operating Instructions
4.1 Basic Operations
- Power On/Off: Press and hold the power button for approximately 3 seconds to turn the transceiver on or off.
- Function Selection: Short press the MODE button to switch between different operating functions (e.g., SSB, CW, AM, WFM).
- Display Screen: The display screen shows the current frequency, operating mode, signal strength, and other relevant status information.

4.2 Operating Modes
The G106C supports the following operating modes:
- SSB (Single Sideband): For voice communication on HF bands.
- CW (Continuous Wave): For Morse code communication.
- AM (Amplitude Modulation): For voice communication, typically on lower HF bands.
- WFM (Wideband FM): For receiving broadcast FM radio (88-108 MHz) only.
5. Features
The XIEGU G106C offers a range of features designed for amateur radio enthusiasts:
- High-performance SDR 16-bit circuit for superior signal processing.
- Compact, robust, and user-friendly design for portable operation.
- General coverage HF receiver for a wide range of listening.
- Transmit capabilities across all amateur radio bands from 3.8 MHz to 29.7 MHz.
- WFM broadcast receiving in the 88-108 MHz band.
- Digital modes option capable, allowing connection to a PC for modes like FT8 with an optional adapter.
- Computer control ready for advanced operation and customization.


6. Specifications
| Parameter | Specification |
|---|---|
| RX Frequency Range | 0.55~30MHz; 88~108MHz (WFM) |
| TX Frequency Range | 3.5~3.9MHz; 7.0~7.2MHz; 10.1~10.15MHz; 14.0~14.35MHz; 18.068~18.168MHz; 21.0~21.45MHz; 24.89~24.99MHz; 28.0~29.7MHz |
| Operating Mode | SSB/CW/AM, WFM (receive only) |
| Receiving Sensitivity | CW: 0.25uV @10dB S/N; SSB: 0.5uV @10dB S/N; AM: 10uV @10dB S/N |
| Frequency Stability | ±1.5ppm within 30min after power on at 25°C: 1ppm/hour |
| Transmitting Power | ≥ 5W at 13.8V DC |
| Transmitting Spurious Suppression | ≥ 50dB |
| Audio Output Power | 0.3W |
| Operating Voltage | 9~15V DC |
| Standby Current | 0.37A at Max |
| Transmitting Current | 2.8A at Max |
| Dimensions | 120 x 40 x 135mm (4.7 x 1.6 x 5.3 inches) |
| Weight | About 720g (1.6lb) (host only) |
| Material | Metal |
| Protection Level | IP20 (for indoor use, except for waterproof models) |


7. Maintenance and Care
- Cleaning: Wipe the outer casing with a soft, dry cloth. Do not use chemical solvents.
- Storage: When not in use for an extended period, clean and store in a cool, dry place.
- Battery (if applicable): If the device has an internal battery and is not used for an extended period, please remove the battery to prevent leakage.
8. Troubleshooting Common Problems
| Problem | Possible Reasons | Solution |
|---|---|---|
| Unable to power on | Power not connected/battery depleted | Check the power connection, charge and try again. |
| No display/Display error | Poor connection/Incorrect settings | Restart the device and check the connection. |
| Inaccurate measurement values (instrument-related) | Range error/calibration required | Confirm the measurement range and contact calibration services. |
| Other faults | Contact customer service for technical support. |
9. User Tips
- Firmware Updates: For optimal performance and access to the latest features, consider updating the transceiver's firmware. Check the manufacturer's website for the latest versions and instructions.
- Band Opening: Some users may wish to operate on additional bands. Consult official documentation or technical support for information on band opening procedures, if available and supported.
- SWR Meter: For efficient transmission and to protect your transceiver, always use an SWR (Standing Wave Ratio) meter to ensure your antenna is properly tuned for the operating frequency.
10. EU Compliance Information
10.1 CE Declaration of Conformity
This product complies with the essential requirements of the following EU directives:
- Low Voltage Directive (LVD) 2014/35/EU
- Electromagnetic Compatibility Directive (EMC) 2014/30/EU
- RoHS Directive 2011/65/EU
10.2 Waste Electrical and Electronic Equipment (WEEE)
The wheeled bin symbol marked with an X on the product indicates that, according to EU Directive 2012/19/EU, this product must not be disposed of as unsorted municipal waste and must be collected and recycled separately.
11. Warranty and Support
Warranty Policy
The product typically comes with a 12/24 month warranty from the date of purchase (subject to store announcement).
Technical Support
For detailed technical documentation, calibration certificates, or hard copies of the manual, please contact us via AliExpress internal message or email: alisupport2026@163.com. Response time is typically within 24 hours on working days.
A comprehensive user manual is also available for download from the manufacturer's website: http://www.cqxiegu.com/filedownload/89714. A PDF version can also be found via the product page: https://manuals.plus/m/f7c6cbacf02346e53af85b6c9537df6c159bfb957ad3d89f40c5e86ae89aaf96
12. Disclaimer
This instruction manual is a general version; the actual product functions and parameters shall prevail. The manufacturer reserves the right to change product designs and specifications without prior notice.