1. Product Overview
The Klarus HM1 is a smart-sensing, high-output headlamp designed for various outdoor activities such as hiking, mountaineering, fishing, and camping. It features a CREE XPG-3 LED, offering a maximum output of 440 lumens, USB charging, and an IPX6 waterproof rating. Its lightweight design and adjustable angle make it a versatile companion for illuminating your path.


2. Package Contents
Please check the package for the following items:
- 1 x HM1 Headlamp
- 1 x Headband
- 1 x Charging Cable (Micro USB)
- 1 x User Manual (this document)
- 1 x Carrying Case

3. Setup
3.1 Initial Charging
The headlamp comes with a partially charged battery (approximately 50%). For optimal performance and maximum runtime, it is recommended to fully charge the battery before first use.
- Connect the Micro USB charging cable to the headlamp's charging port.
- Connect the other end of the cable to any standard USB power outlet (e.g., computer, wall adapter).
- The recharging indicator will show red during charging and turn green when charging is complete.


3.2 Attaching the Headband
Thread the adjustable headband through the slots on the headlamp body. Adjust the strap to ensure a comfortable and secure fit on your head.
3.3 Angle Adjustment
The headlamp features a 0-60° adjustable angle, allowing you to direct the light precisely where needed. Simply tilt the headlamp body up or down to achieve the desired beam angle.

4. Operating Instructions
The HM1 headlamp offers two main operating modes: Constant-On and Smart-Sensing.

4.1 Constant-On Mode (Mode Switch)
The headlamp is controlled by a single mode switch for various brightness levels.
- Turn ON: Click the Mode switch to turn ON the headlamp at Medium (Spotlight) brightness.
- Change Brightness: Within 3 seconds of turning ON or changing modes, click the Mode switch again to cycle through brightness levels:
Medium (Spotlight) → High (Spotlight) → Turbo (Spotlight + Floodlight) → High (Floodlight) → Low (Floodlight) - Turn OFF: If the headlamp has been ON for more than 3 seconds in any mode, a single click of the Mode switch will turn it OFF.
4.2 Smart-Sensing Mode (Motion Sensor Switch)
This mode allows for hands-free control with a wave of your hand.
- While the headlamp is ON, click the Motion Sensor Switch to enter Sensory Mode. The indicator light will flash for 2 seconds to confirm activation.
- The optimal sensing distance is 7cm-15cm (2.76-5.91 inches).
- Wave your hand in front of the lamp to control it (ON → OFF → Cycle).
- While in Sensory Mode, you can click the Mode switch to adjust the brightness level. If you click the Mode switch again after 3 seconds, the headlamp will turn OFF.
4.3 Battery Capacity Indicator
After power-on, the indicator light will illuminate for 5 seconds to show the remaining battery capacity:
- Blue: 30% - 100%
- Red: 5% - 30%
- Red flashing: Less than 5%
5. Maintenance
5.1 Charging
Recharge the headlamp using the provided Micro USB cable. The charging indicator will be red during charging and green when fully charged.
5.2 General Usage and Care
- Avoid direct eye contact with the light to prevent injury.
- Do not disassemble or modify the product, as this can cause damage and void the warranty.
- The surface temperature of the headlamp may increase during use, especially at higher lumen outputs. The maximum safe operating surface temperature is 60°C (140°F).
5.3 Long-Term Storage
If the headlamp will not be used for an extended period, it is recommended to charge it every 3 months to maintain battery health.
6. Troubleshooting
6.1 Dimming or Mode Issues
If the headlamp dims unexpectedly or is unable to switch modes, it indicates that the battery capacity is low. Please recharge the battery immediately.
7. Specifications
| Feature | Detail |
|---|---|
| Model | HM1 |
| LED | CREE XPG-3 |
| Output | Max 440 LM |
| Working Voltage | 2.5V - 5.0V |
| Battery Capacity | 1800mAh (Lithium ion) |
| Waterproof Rating | IPX6 |
| Dimensions | 60mm (L) x 43mm (W) x 41mm (H) |
| Weight | 70g (2.47oz) (with headband) |
| Beam Angle | 180° |
| Switch Mode | High/Middle/Low |
| Impact Resistance | 2 meters |
7.1 Output and Runtime
| Mode | Output (LM) | Runtime (h) | Beam Intensity (cd) | Beam Distance (m) |
|---|---|---|---|---|
| Turbo (Spotlight+Floodlight) | 440 | 2.5 | 2500 | 100 |
| High (Spotlight) | 330 | 3.7 | 2450 | 99 |
| Medium (Spotlight) | 100 | 8 | 760 | 55 |
| High (Floodlight) | 120 | 7.7 | 64 | 16 |
| Low (Floodlight) | 10 | 70 | 7 | 5 |
Note: Data are based on Klarus lab tests. Actual results may differ based on usage and conditions.
8. User Tips
- Many users praise the HM1 as an "excellent" and "awesome" headlamp, highlighting its performance.
- Ensure the battery is fully charged before extended use to experience the full output and runtime capabilities.
- The large, flat buttons are designed for easy activation and mode switching, reducing errors during operation.
- The lightweight design makes it comfortable for prolonged activities like jogging, mountaineering, fishing, and camping.
9. Warranty and Support
9.1 Warranty Policy
- 15-Day Replacement: Within 15 days of purchase, if the product has quality issues under normal use, it can be replaced free of charge with the same model. If the model is discontinued, it will be replaced with an upgraded or equivalent product.
- 2-Year Warranty: Within 2 years of purchase, if the product has quality issues under normal use, it is eligible for free repair service.
- Limited Lifetime Warranty: For product damage caused by improper use or issues beyond the free warranty period, paid repair services are available. The cost will be based on the actual replacement materials, with no additional labor fees. If the damage is substantial, KLARUS will provide a quote to the customer via the dealer.
9.2 Warranty Procedure
If your HM1 headlamp does not perform as specified:
- Contact your original KLARUS dealer for replacement or repairs.
- If the dealer cannot resolve the warranty issue, contact KLARUS directly at service@klaruslight.com for assistance.
- To expedite the process, please provide the following information:
- The serial number of the headlamp.
- A detailed description of the issue, including pictures or a short video demonstration if possible.
- The name and store of the dealer from whom you purchased the product, along with a copy of the proof of purchase.
9.3 Contact Information
KLARUS LIGHTING TECHNOLOGY CO., LIMITED
- Address: 8/F, E Building, Longjing Industrial Science Park, 335 Bulong Rd, Bantian St. in Longgang District, Shenzhen, China, 518000.
- Phone: +86-755-27700110
- Email: service@klaruslight.com
- Website: www.klaruslight.com
Note: Product specifications are subject to change without prior notice. The final product may differ slightly from photographic representations. KLARUS reserves the right to make the final determination of terms and conditions in this manual.
For the latest updates, scan the QR code on the original user manual or visit the KLARUS official website.