GIEC Q.24-161 Series

Contents

GIEC Infrared Remote Control User Manual

Model: Q.24-161 Series

For QILIVE LED TVs

1. Introduction

This user manual provides comprehensive instructions for the GIEC Infrared (IR) Remote Control, designed for use with various QILIVE LED TV models, including Q.24-161, Q1042, Q24161, Q49-161, and Q1324. This remote control operates using infrared technology and does not require any complex pairing process. Please read this manual carefully to ensure proper use and to maximize your viewing experience.

2. Package Contents

  • 1 x GIEC Infrared Remote Control

Note: Batteries are typically not included and must be purchased separately (usually 2x AAA batteries).

3. Product Overview

Familiarize yourself with the layout and functions of your new remote control.

Front view of the GIEC remote control with all buttons visible.

Figure 3.1: Front view of the GIEC remote control, showing all buttons.

Back view of the GIEC remote control, highlighting the battery compartment.

Figure 3.2: Back view of the GIEC remote control, showing the battery compartment.

Close-up of the IR emitter on the top front of the remote control.

Figure 3.3: Close-up of the Infrared (IR) emitter on the top front of the remote.

Button Functions:

  • Power Button (Red Circle): Turns the TV on or off.
  • Numeric Keypad (0-9): For direct channel selection.
  • TV/Input Button: Switches between different input sources (HDMI, AV, etc.).
  • Volume Up/Down (V+/V-): Adjusts the TV volume.
  • Channel Up/Down (P+/P-): Changes TV channels.
  • Mute Button: Mutes or unmutes the TV sound.
  • Menu Button: Accesses the TV's main menu.
  • Navigation Buttons (Up, Down, Left, Right Arrows): Navigates through menus and options.
  • OK Button: Confirms selections in menus.
  • BACK Button: Returns to the previous menu or screen.
  • EXIT Button: Exits the current menu or function.
  • Info Button (i): Displays program information.
  • Colored Buttons (Red, Green, Yellow, Blue): These buttons have specific functions depending on the TV model or the content being viewed (e.g., teletext, interactive features).
  • LANG. Button: Changes audio language or subtitle options.
  • Media Control Buttons (Play, Pause, Stop, Rewind, Fast Forward): Controls media playback if supported by the TV.

4. Setup

4.1 Battery Installation

  1. Locate the battery compartment on the back of the remote control (refer to Figure 3.2).
  2. Slide open the battery compartment cover.
  3. Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment.
  4. Close the battery compartment cover securely.

Note: Always use new batteries and replace both batteries at the same time. Do not mix old and new batteries or different types of batteries.

4.2 Initial Use

This GIEC remote control uses infrared (IR) technology and does not require any complex pairing or setup process. Once batteries are installed, it should function directly with compatible QILIVE LED TVs. Simply point the remote control towards the TV's IR receiver and press the desired button.

5. Operating Instructions

To operate your QILIVE LED TV with this remote control, ensure there is a clear line of sight between the remote's IR emitter (Figure 3.3) and the TV's IR receiver.

  • Power On/Off: Press the Power button once.
  • Changing Channels: Use the P+ or P- buttons to cycle through channels, or use the Numeric Keypad for direct channel entry.
  • Adjusting Volume: Press V+ to increase volume and V- to decrease volume.
  • Accessing Menus: Press the MENU button to open the TV's main menu. Use the Navigation Arrows to move, and OK to select. Press BACK to go back or EXIT to leave the menu.
  • Selecting Input Source: Press the TV/Input button to cycle through available input sources (e.g., HDMI 1, HDMI 2, AV).
  • Special Functions: The colored buttons (Red, Green, Yellow, Blue) and media control buttons (Play, Pause, etc.) will activate specific features depending on the TV model and the current application or content.

6. Maintenance

  • Keep the remote control dry. Avoid exposing it to water or high humidity.
  • Do not drop or subject the remote control to strong impacts.
  • Clean the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • If the remote control will not be used for an extended period, remove the batteries to prevent leakage.

7. Troubleshooting

ProblemPossible CauseSolution
Remote control is not working.
  • Batteries are dead or incorrectly inserted.
  • Obstruction between remote and TV.
  • Remote control is too far from the TV.
  • TV's IR receiver is blocked or faulty.
  • Replace batteries with new ones, ensuring correct polarity.
  • Remove any objects blocking the line of sight to the TV.
  • Move closer to the TV.
  • Ensure the TV's IR receiver is not covered. Test with another remote if available.
Remote control buttons are unresponsive or sticky.
  • Dirt or debris under buttons.
  • Internal damage.
  • Clean the remote control surface.
  • If cleaning doesn't help, the remote may need replacement.
Remote control needs to be paired with the TV.
  • Misunderstanding of remote technology.
  • This remote control uses infrared (IR) technology and does not require pairing. Ensure batteries are fresh and there is a clear line of sight to the TV.

8. Specifications

FeatureDetail
Brand NameGIEC
Model NumberQ.24-161 (Compatible with QILIVE Q.24-161, Q1042, Q24161, Q49-161, Q1324)
Wireless CommunicationIR (Infrared)
Frequency433 MHz
Channel1
UseTV
Support APPNo
PackageYes
OriginMainland China
CertificationCE
Power Source2x AAA Batteries (not included)

9. User Tips

  • Battery Check: If the remote seems unresponsive, always check and replace the batteries first. Ensure they are inserted with the correct polarity.
  • Line of Sight: For optimal performance, ensure there is a direct, unobstructed line of sight between the remote control's IR emitter and the TV's IR receiver.
  • No Pairing Needed: This is an infrared remote control, meaning it works by sending light signals directly to your TV. It does not require any Bluetooth or wireless pairing process. If it's not working, it's usually a battery or line-of-sight issue, not a pairing problem.

10. Warranty and Support

For any issues or questions regarding your GIEC remote control, please refer to the retailer or manufacturer's support channels. Keep your purchase receipt for warranty purposes.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.