To Our Valued Customers
Thank you very much for choosing the Retevis RT668/RT68 two-way radio. This radio features a modern design, reasonable structure, and stable functions, crafted to meet diverse communication needs with high quality, easy operation, and perfect capability. We are confident you will be pleased with its excellent performance and ergonomic design.
Safety Information and Important Guidelines
Please read the following brief instructions carefully. Non-compliance with these rules may cause danger or violate the law.
General Safety Tips
- Always obey local government regulations regarding radio use. Improper use may lead to penalties.
- Turn off the radio before entering flammable or explosive areas.
- Do not charge or change the battery in flammable or explosive areas.
- Turn off the radio before approaching blasting zones or areas with detonators.
- Do not use a radio with a damaged antenna, as touching a damaged antenna can cause heat injury.
- Do not attempt to open the radio. Maintenance should only be performed by a technical expert.
- To avoid electromagnetic interference, turn off the radio in areas marked "Do not use wireless equipment," such as hospitals and other healthcare facilities.
- In vehicles equipped with airbags, do not place the radio within the airbag deployment area.
- Do not store the radio under direct sunlight or in hot areas.
- When transmitting, keep the radio's antenna at least 5cm away from your body.
- If the radio emits smoke or an unusual smell, immediately turn it off and contact your local dealer.
- Avoid transmitting for excessively long periods, as the radio may heat up and cause discomfort.
RF Energy Exposure and Product Safety Guide
This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum for communication. Improper use of RF energy can cause biological damage. All Retevis two-way radios are designed, manufactured, and tested to meet government-established RF exposure levels. Users should be aware of RF energy exposure and follow simple procedures to control it.
For more information on RF energy exposure and control, please refer to: http://www.who.int/en/
Local Government Regulations
When using two-way radios for employment, users must be fully aware of and control their exposure to meet occupational requirements. Your Retevis two-way radio includes an RF Exposure Product Label, and this manual provides user awareness information.
Unauthorized Modification and Adjustment
Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate this radio. Transmitter adjustments should only be made by or under the supervision of a certified technical expert. Replacing any transmitter component not authorized by the local government radio management departments could violate regulations.
FCC Requirements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device. It generates, uses, and can radiate radio frequency energy. If not installed and used according to the instruction manual, it may cause harmful interference to radio communications.
FCC ID: 2ASNSRT68
CE Requirements
Shenzhen Retevis Technology Co., Ltd. declares that this radio equipment type complies with the essential requirements and other relevant provisions of RED Directive 2014/53/EU, ROHS Directive 2011/65/EU, and WEEE Directive 2012/19/EU. The full text of the EU declaration of conformity is available at www.retevis.com.
This product can be used in EU countries and regions, including: Belgium (BE), Bulgaria (BG), Czech Republic (CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE) and United Kingdom (UK).
RF Exposure Information (Detailed)
- DO NOT operate the radio without a proper antenna attached, as this may damage the radio and cause you to exceed RF exposure limits. Use only the antenna supplied or authorized by the manufacturer.
- DO NOT transmit for more than 50% of total radio use time. Exceeding this can lead to non-compliance with RF exposure requirements.
- During transmissions, your radio generates RF energy that can interfere with other devices. Turn off the radio in areas where signs indicate to do so.
- DO NOT operate the transmitter in areas sensitive to electromagnetic radiation, such as hospitals, aircraft, and blasting sites.
- For portable use, this transmitter may operate with documented antennas in Push-to-Talk and body-worn configurations. RF exposure compliance requires a separation distance of at least 2.5 cm between the user and the device/antenna.
- For mobile use, the separation distance between the user and the antenna must comply with actual regulations to ensure sufficient distance from a properly installed externally-mounted antenna.
- This radio is designed for "Occupational/Controlled Use Only," meaning it should be used by individuals aware of hazards during employment. It is NOT intended for "General population/uncontrolled Use."
RF Exposure Compliance and Control Guidelines
- User awareness instructions should accompany the device when transferred to other users.
- Do not use this device if the operational requirements described herein are not met.
Operating Instructions for RF Exposure
- Transmit no more than 50% of the time. To transmit, press the Push to Talk (PTT) button. To receive, release the PTT button.
- Transmit only when people outside the vehicle are at least the recommended minimum lateral distance away from a properly installed, externally mounted antenna.
- When operating in front of the face or body-worn, always place the radio in a Retevis approved clip, holder, holster, case, or body harness. Using non-approved accessories may exceed RF exposure limits.
Hand-held Mode
Hold the radio in a vertical position with the microphone (and other parts, including the antenna) at least 2.5 cm (one inch) away from the nose or lips. Keep the antenna away from the eyes. Maintaining proper distance is crucial as RF exposure decreases with increasing distance from the antenna.
Phone Mode
When making or receiving a call, hold your radio as you would a wireless telephone. Speak directly into the microphone.
Electromagnetic Interference/Compatibility
Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or configured for electromagnetic compatibility.
Avoid Choking Hazard

Turn off your radio power in the following conditions:
- Before removing (installing) a battery or accessory, or when charging.
- In potentially hazardous environments: near electrical blasting caps, in a blasting area, or in explosive atmospheres (inflammable gas, dust particles, metallic powders, grain powders, etc.).
- While fueling or parked at gasoline service stations.
Avoid Burns
- Antennas: Do not use any portable radio with a damaged antenna. Contact with a damaged antenna can cause minor burns.
- Batteries: Avoid conductive materials (jewelry, keys, chains) touching exposed battery terminals, as this can cause a short circuit, heating, and potential burns. Handle batteries carefully.
- Long Transmission: The radio's radiator and chassis may become hot during long transmissions.
Safety Operation (Forbid)
- Do not use the charger outdoors or in moist environments; use only in dry locations/conditions.
- Do not disassemble the charger, as this may result in electrical shock or fire.
- Do not operate the charger if it is broken or damaged.
- Do not place a portable radio in the area over an airbag or in the airbag deployment area. The radio may be propelled with great force and cause serious injury if the airbag inflates.
To Reduce Risk (Charger Safety)
- Always pull by the plug, not the cord, when disconnecting the charger.
- Unplug the charger from the AC outlet before any maintenance or cleaning.
- Contact Retevis for assistance regarding repairs and service.
- The adapter should be installed near the equipment and be easily accessible.
Approved Accessories
This radio meets RF exposure guidelines when used with Retevis-supplied or designated accessories. Use of other accessories may not ensure compliance and could violate regulations. For a list of approved accessories, visit www.Retevis.com.
Unpacking and Checking Equipment
Welcome to your new Retevis two-way radio! Before discarding the packaging, please check the contents against the list below. If any item is missing, please contact your local dealer immediately.
Supplied Accessories (for 10-pack)
- 10 x Two-Way Radios (Transceivers)
- 10 x Li-ion Batteries
- 10 x USB Charge Bases
- 10 x Belt Clips
- 10 x Slings (Lanyards)
- 5 x User Manuals
- 10 x Earphones
- 10 x Adapters

Product Overview
Familiarize yourself with the various parts and controls of your Retevis RT668/RT68 two-way radio.


Key Components
- Antenna: For transmitting and receiving signals.
- Lanyard Hole: For attaching a wrist strap or lanyard.
- PTT (Push-to-Talk) Switch: Press to transmit, release to receive.
- Squelch Button: Used to adjust squelch level.
- Channel Knob: Rotates to select channels (1-16).
- Power/Volume Knob: Rotates clockwise to turn on the radio and adjust volume; counter-clockwise to turn off.
- Indicator Light: Red when transmitting, green when receiving. Blinks red when battery is low.
- Earpiece/Mic Jack: For connecting a headset or external programming cable.
- Mic: Microphone for voice input.
- Battery Release Buckle: For detaching the battery.
- Li-ion Battery: Provides power to the radio.



Basic Operation
1. Indicator
The indicator light turns red when transmitting and green when receiving. It blinks red when the battery capacity is low.
2. Channel Knob
Rotate the channel knob to select channels 1 through 16. Rotate counter-clockwise to decrease the channel number, and clockwise to increase it.
3. Power Knob/Volume Knob
Rotate this knob clockwise to turn on the radio and adjust the volume. Rotate counter-clockwise to turn off the radio.
4. PTT (Push-to-Talk) Switch
Press the PTT switch and speak into the microphone to transmit. The indicator light will turn red. If the channel does not have a transmitting frequency, a "DU DU" tone will sound, and the indicator light will still turn red. Release the PTT switch to receive; the indicator light will turn green when a signal is present.

5. Squelch Level
The squelch level determines the signal strength required to open the radio's speaker. A lower squelch level results in more background noise but a wider communication range, with weaker anti-interference capacity. The default squelch level is 5. You can adjust it via the "Squelch level" menu in the programming software. Levels 0 to 9 are available, with 0 being the lowest.
6. TOT (Time-Out Timer)
The TOT function prevents the radio from transmitting continuously for too long on one channel, protecting the transceiver from damage. If the transmission time exceeds the pre-set TOT time, the radio will sound "DU" and stop transmitting. Release the PTT key to return to receive status and stop the "DU" sound.
7. Scan
When the current channel is channel 16, the radio will automatically scan the 16 channels defined for scanning. When a scanned channel has a signal, the radio will stop on that channel for communication.
Notice:
- If there are fewer than 2 scannable channels, the radio cannot scan.
- If the radio stops on a channel with a signal, it will scan the next channel after the signal disappears for 10 seconds.
- To exclude a channel from scanning, select "No" in the "Scan Add" setting for that channel.
8. English Voice Prompt
The voice prompt language can be selected as "English/None" through the programming software. Some models may also offer Russian voice prompts.
9. Battery Save Function
This function can be enabled via the programming software to extend the radio's standby time.
10. Low Battery Alert
The radio will alert you when the battery capacity reaches its minimum operating voltage.
11. Busy Channel Lock
This function can be enabled or disabled via the programming software.
- A. No CTCSS/DCS, Signal Present: If the current channel does not have CTCSS/DCS set, and there is a signal, transmission (TX) is prohibited when you press PTT.
- B. No CTCSS/DCS, Signal Present (TX Prohibited): If the current channel does not have CTCSS/DCS set, and there is a signal, transmission (TX) is prohibited when you press PTT.
- C. With CTCSS/DCS, Signal Present: If the current channel has CTCSS/DCS set, and there is a signal, the radio will transmit when you press PTT.
12. VOX (Voice Operated Exchange)
VOX allows you to transmit by speaking into the microphone without pressing the PTT button. This function can be turned on/off through the software.
- A. In Working Channel: When VOX is active, speaking directly into the microphone will automatically initiate transmission. The radio stops transmitting when there is no voice and waits for receiving.
- B. With Headset: When using a headset with a microphone and VOX is active, you should adjust the VOX gain for the radio to correctly identify your voice volume. If the microphone is too sensitive, environmental noise may trigger transmission. If it's not sensitive enough, the radio may not pick up your voice. Adjust the VOX level carefully for smooth communication.

13. Scrambler
When the scrambler function is enabled and activated, your transmitted voice will be scrambled. Other radios will only receive the signal clearly if their scrambler function is also turned on.
14. CTCSS/DCS (Continuous Tone-Coded Squelch System / Digital Coded Squelch)
CTCSS and DCS are sub-audio signaling methods that prevent the radio from receiving unwanted signals on the same channel. When CTCSS/DCS is set, you will only receive signals from other radios on the same channel with the identical CTCSS/DCS setting. If CTCSS/DCS is not set, you will receive all signals from the same channel. You can set CTCSS/DCS through the "ENC" or "DEC" menu in the "Channel Setting" of the software.
15. Programming Protect
You can add a programming password in the programming software. Once set, you will need to input the password before programming the radio.
Specifications
Detailed technical specifications for the Retevis RT668/RT68 two-way radio.

General
| Feature | Specification |
|---|---|
| Channel | 16 |
| Working Voltage | 3.7 V DC |
| Working Temperature | -10℃ ~ +50℃ |
| Weight | 161g (including antenna and battery) |
| Dimensions | 165*55*33mm |
| Battery Capacity | 1200 mAh |
| Battery Included | Yes |
| Rechargeable Battery Included | Yes |
| Waterproof / Water-Resistant | No |
| Is_Display | No |
| PC software programmable | YES |
| Audio Connector | Compatible with 2Pin K plug Accessories |
| Antenna Connector | Fixed |
| Usable programming cable | C9018A/C9055A |
| Certification | CE, FCC |
Transmitter
| Feature | Specification |
|---|---|
| Frequency Range | 446MHz (PMR) / FRS |
| RF Power | 2W / 0.5W |
| Modulation Type | FM |
| Spurious Radiation | <7.5 μW |
| Modulation Noise | <-40dB |
| Modulation Distortion | <5% |
| Frequency Stability | 5ppm |
| Max Fr. Deviation | ≤ ±5KHz |
| Current | ≤1200mA |
| Audio Response | +6.5 ~ -14dB |
| Adjacent Ch. Power | >65dB |
Receiver
| Feature | Specification |
|---|---|
| Receiving Sensitivity | ≤0.2 μV |
| Occupied Bandwidth | ≤16KHz |
| Selectivity | ≥65dB |
| Inter Mediation | ≥55dB |
| Audio Power Output | >500mW |
| Modulation Distortion | ≤10% |
| Frequency Stability | 5ppm |
| Current | Standby 55mA, Working 150mA |
| Audio Response | +7 ~ -12.5dB |
FRS Channel Table
| CH.NO | Freq.(MHz) | ERP | CTCSS/DCS | CH.NO | Freq.(MHz) | ERP | CTCSS/DCS |
|---|---|---|---|---|---|---|---|
| 1 | 462.56250 | High | 67.0 | 9 | 462.71250 | High | 146.2 |
| 2 | 462.58750 | High | 118.8 | 10 | 462.55000 | High | 123.0 |
| 3 | 462.61250 | High | 127.3 | 11 | 462.57500 | High | D743I |
| 4 | 462.63750 | High | 131.8 | 12 | 462.60000 | High | D332I |
| 5 | 462.66250 | High | 136.5 | 13 | 462.65000 | High | D243I |
| 6 | 462.62500 | High | 127.3 | 14 | 462.67500 | High | D606N |
| 7 | 462.72500 | High | 136.5 | 15 | 462.70000 | High | D731I |
| 8 | 462.68750 | High | 141.3 | 16 | 462.72500 | High | D462I |
Maintenance
Proper maintenance ensures the longevity and optimal performance of your radio.
Cleaning
- Wipe the radio with a soft, damp cloth.
- Do not use harsh chemicals or solvents.
- Ensure the radio is powered off and disconnected from any power source before cleaning.
Battery Care
- Charge the battery fully before first use.
- Avoid overcharging or completely draining the battery.
- Store batteries in a cool, dry place when not in use.
Storage
- Store the radio in a dry, dust-free environment.
- Avoid extreme temperatures.
- Remove the battery if storing for extended periods.
Troubleshooting
If you encounter issues with your radio, refer to the following common problems and solutions.
No Power
- Check if the battery is properly installed and charged.
- Ensure the Power/Volume knob is turned clockwise to turn on the radio.
Cannot Transmit or Receive
- Verify that the radio is on the correct channel.
- Check if the battery is sufficiently charged.
- Ensure the antenna is securely attached and undamaged.
- If using CTCSS/DCS, ensure both radios are set to the same code.
- Check if Busy Channel Lock (BCL) is active and preventing transmission.
- Adjust the Squelch level; a high squelch level might block weak signals.
Poor Sound Quality
- Adjust the volume level.
- Ensure the microphone and speaker are not obstructed.
- Check for interference from other electronic devices.
- If using VOX with a headset, adjust the VOX gain.
Short Communication Range
- Ensure you are in an open area with minimal obstructions.
- Check for environmental factors like thick walls or dense foliage.
- Verify the antenna is correctly attached and undamaged.
- A lower squelch level might improve reception of weaker signals, extending effective range.
If the problem persists, please contact Retevis customer support.
User Tips
- Programming: For advanced customization, such as setting specific frequencies or CTCSS/DCS codes, consider purchasing a programming cable (C9018A/C9055A) and using the PC software. If you are unsure how to program, contact customer service for assistance.
- Voice Prompts: The radio supports English voice prompts. Some versions may also offer Russian. You can select the desired voice prompt language or disable it via the programming software.
- Battery Life: The 1200 mAh Li-ion battery provides 8-12 hours of working time. To maximize battery life, enable the 'Battery Save Function' through the programming software.
- Durability: The RT668/RT68 is designed to be rugged and durable, resistant to falls, making it suitable for harsh environments like construction sites, factories, and warehouses.
- Hands-Free Communication: Utilize the VOX function for hands-free operation, especially useful when your hands are occupied. Adjust VOX gain carefully when using a headset to avoid unwanted transmissions or missed voice inputs.
- Clear Sound: The radio is designed to effectively eliminate environmental noise, providing clear and natural voice communication.
Warranty and Support
Retevis is committed to providing stable, clear, and efficient wireless communication services. To ensure you receive quality warranty service, please keep your warranty card and purchase invoice.
Warranty Period
The product warranty period begins from the purchase date. The radio is guaranteed for 12 months, and accessories for 6 months, under normal use conditions. For warranty service, please present your original warranty card and purchase invoice to a Retevis designated authorized warranty repair station.
Paid Service Conditions
The following situations will result in paid service, even within the warranty period:
- Failure to produce the warranty card.
- Warranty card has altered traces or is inconsistent with the product.
- Defect or damage caused by abnormal or non-normal use.
- Defect or damage caused by misuse, accident, water, or negligence.
- Defect or damage caused by improper testing, operation, maintenance, installation, disassembly, or adjustment.
- Defect or damage caused by unauthorized repair or disassembly.
- Defect or damage caused by force majeure.
- Wear and tear under normal use.
If repair is needed, send the radio, warranty card, and purchase invoice by post or directly to a Retevis designated authorized service station. Shipping costs are borne by the user.
Contact Information
- Manufacturer: Shenzhen Retevis Technology Co., Ltd.
- Website: www.retevis.com
- E-mail: kam@retevis.com
- Facebook: facebook.com/retevis
- Address: 7/F, 13-C, Zhonghaixin Science&Technology Park, No.12 Ganli 6th Road, Jihua Street, Longgang District, Shenzhen, China