1. Product Overview
This product is a decorative and protective trim designed for the B and C pillars of the Hyundai Creta IX25. Made from high-quality PC (Polycarbonate) material, it offers a mirror-effect finish or a carbon fiber look, enhancing the visual appeal of your vehicle. It is scratch-resistant and designed for non-destructive installation, integrating seamlessly with your car's windows.
Available in two styles: Glossy Black and Carbon Fiber, and tailored for specific model years:
- 8-piece set: For Hyundai Creta IX25 2014-2019
- 6-piece set: For Hyundai Creta IX25 2020-2022


2. Specifications
| Attribute | Value |
|---|---|
| Model Name | For Hyundai Creta IX25 |
| Model Year Compatibility | 2014-2019 / 2020-2022 |
| Item Weight | 0.2kg |
| Special Features | Decoration, Protection |
| Material | PC (Polycarbonate) |
| Brand Name | ZUIMI |
| Item Type | Chromium Styling |
| Color Options | Carbon Fiber / Black |
| Style | Glossy |
3. Package Contents
Depending on your selected model year, your package will contain either:
- For 2014-2019 models: 8 pieces of Car Window B C pillars Molding Trim
- For 2020-2022 models: 6 pieces of Car Window B C pillars Molding Trim
Each trim piece comes with pre-applied automotive adhesive tape on the back.
4. Setup & Installation
Important Note: These are not replacement pillars. They are trims designed to cover your existing pillars. Your original pillars must be in place and intact for proper application of this product.
Installation Steps:
- Clean the Surface: Thoroughly clean the car pillar surface with alcohol to ensure it is free of dust, dirt, wax, or grease. The area must be completely dry before proceeding.
- Compare Position: Carefully compare each trim piece with the corresponding car pillar to ensure correct fitment and alignment before removing the adhesive backing.
- Prepare Adhesive: Remove the protective film from the adhesive on the back of the trim piece. For optimal adhesion, gently heat the adhesive tape using a hot air gun or hairdryer. This makes the glue stickier and ensures a more secure bond.
- Apply Trim: Align the trim piece precisely with the car pillar. Once aligned, press the patch firmly from top to bottom and side to side to ensure full contact with the surface.
- Remove Protective Film: After the trim is securely installed, carefully peel off the transparent protective film from the surface of the trim piece.
- Finalize: Ensure all edges are pressed down firmly.
Post-Installation Care: Do not wash your car within 48 hours after installation to allow the adhesive to fully cure.


5. Operating Instructions
As a decorative and protective trim, this product does not have operational functions. Once installed, it serves to enhance the aesthetic of your vehicle and provide an additional layer of protection to the car pillars.
6. Maintenance & Care
- Cleaning: Clean the pillar trims with a soft cloth and mild car-safe cleaning solution. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Protection: The PC material is scratch-resistant, but avoid sharp objects or excessive force that could cause damage.
- Regular Inspection: Periodically check the adhesion of the trims, especially after extreme weather conditions, to ensure they remain securely attached.
7. Troubleshooting
Adhesion Issues:
- Trim not sticking well: Ensure the surface was thoroughly cleaned and dry before installation. Re-apply heat to the adhesive tape with a hot air gun to reactivate its stickiness, then press firmly.
- Edges lifting: If edges lift, gently re-heat the affected area and press down firmly for an extended period. Consider using additional automotive-grade double-sided tape if necessary.
Fitment Issues:
- Trim does not fit: Double-check that you have purchased the correct set (6-piece or 8-piece) for your specific Hyundai Creta IX25 model year (2014-2019 or 2020-2022). These trims are designed for precise fitment.
8. User Tips
- For a flawless finish, take your time during installation. Precision in alignment is key.
- Applying the trims in a warm environment (above 15°C / 60°F) can significantly improve adhesive performance.
- Always perform a dry fit before peeling off any adhesive backing to confirm placement.
9. Warranty & Support
This product comes with a Basic 3 Month Seller's Warranty. If the item is found to be defective within 3 months of purchase, a replacement will be offered without extra charge (including shipping fee) after the defective item is received.
For issues beyond 3 months, buyers may still send the item back, and the seller will contact suppliers or manufacturers for warranty support. Buyers might need to cover the shipping fee for resending the replaced item.
For any support inquiries or to report a defective item, please contact the seller directly through the platform where the purchase was made.