Introduction
This manual provides instructions for the proper use and maintenance of your new set of universal replacement clipper combs. These combs are designed to be compatible with various Wahl T-Blade trimmer models, offering a range of cutting lengths for precise grooming. Please read this manual thoroughly before first use to ensure optimal performance and safety.
Safety Information
- Always ensure your hair trimmer is turned OFF before attaching or removing any comb.
- Inspect combs for any damage (cracks, broken teeth) before each use. Do not use damaged combs.
- Keep combs clean and free of hair and debris to ensure smooth operation and hygiene.
- Store combs in a safe place to prevent damage.
Package Contents
- 1 Set of 8 Hair Clipper Guide Combs (sizes #1 through #8)
Note: Trimmer device is not included.
Image: Complete set of 8 universal replacement clipper combs.
Specifications
| Feature | Detail |
|---|---|
| Material | Plastic |
| Color | Black |
| Size | Standard |
| Item Type | Comb |
| Number of Pieces | One Unit (set of 8) |
| Compatibility | Wahl T-Blade Trimmers (Models: 9837, 9854L, 9860, 9860L, 9864, 9867L, 9867-100, 9869, 9870L, 9876, 9880L, 9884, 9884L, 9885, 9885L) |
Cutting Lengths
| Comb Number | Imperial Size | Metric Size |
|---|---|---|
| #1 | 1/8" | 3mm |
| #2 | 1/4" | 6mm |
| #3 | 3/8" | 10mm |
| #4 | 1/2" | 13mm |
| #5 | 5/8" | 16mm |
| #6 | 3/4" | 19mm |
| #7 | 7/8" | 22mm |
| #8 | 1" | 25mm |
Image: Close-up view of combs with their respective size markings.
Setup and Installation
- Clean the Trimmer: Before installing a new comb, ensure your hair trimmer's blade is clean and free of hair and debris.
- Select Comb: Choose the desired guide comb based on the cutting length you wish to achieve (refer to the Specifications table).
- Attach Comb: With the trimmer turned OFF, align the comb with the trimmer blade. Gently push the comb onto the blade until it securely snaps into place. Ensure it is firmly attached and does not wobble.
- Verify Attachment: Lightly tug on the comb to confirm it is properly seated and will not detach during use.
- Removal: To remove, gently lift the comb from the back and slide it off the trimmer blade.
These combs are designed for easy installation and removal.
Operating Instructions
Once the desired guide comb is securely attached to your Wahl T-Blade trimmer:
- Turn on your trimmer.
- Begin trimming hair, moving the trimmer against the direction of hair growth for an even cut.
- These combs are suitable for both wet and dry use, and can be used in the shower for convenience and easy cleaning.
- For best results, ensure the comb remains flat against the scalp or skin surface during trimming.
Maintenance
- Cleaning After Each Use: After each use, remove the comb from the trimmer. Use a small brush (often included with trimmers) to remove any trapped hair.
- Rinsing: The combs can be rinsed under running water for thorough cleaning. Ensure all hair and product residue are removed.
- Drying: Allow the combs to air dry completely before storing or reattaching to the trimmer. Do not use heat to dry them, as this may deform the plastic.
- Storage: Store the combs in a clean, dry place, preferably in their original packaging or a designated storage container, to prevent damage.
Troubleshooting
- Comb not attaching securely: Ensure the trimmer blade is clean and free of obstructions. Verify that you are using a compatible Wahl T-Blade trimmer model. Apply gentle, even pressure until the comb snaps into place.
- Uneven cut: Check that the comb is fully seated and not loose. Ensure the comb is held flat against the skin during trimming. Clean the comb and trimmer blade to remove any hair buildup that might interfere with cutting.
User Tips
- Verify Compatibility: Always double-check your specific Wahl T-Blade trimmer model and the required comb sizes carefully before purchasing or using. If unsure, consult your trimmer's manual or contact the seller for confirmation.
- Gradual Trimming: If you are new to trimming or unsure about a specific length, start with a larger comb size and gradually work your way down to a smaller size until you achieve the desired length.
Warranty and Support
For any questions, concerns, or support regarding your universal replacement clipper comb set, please contact the seller directly through the platform where the purchase was made. Provide your order details for faster assistance.