1. Introduction
This manual provides comprehensive instructions for the Godox TT685II series flash speedlite hot shoe accessories. It covers product overview, installation, operation, maintenance, safety warnings, and compliance information. Please read this manual thoroughly before using the product to ensure safe and correct operation.
For a detailed PDF version of this manual, please refer to the official document: Godox TT685II User Manual (PDF).
2. Product Overview
The Godox photography accessories series includes various categories such as softboxes, honeycomb grids, reflectors, metal light stands, Bowens mount adapters, TTL wireless triggers, and soft umbrellas. These accessories are crafted from high-quality materials, including ABS engineering plastic, optical soft cloth, and metal alloys.
They are designed to be compatible with the entire Godox flash and LED light series. Specific model compatibility is indicated on the product packaging. Some accessories feature universal mounts like Bowens and Elinchrom, allowing compatibility with other brands' compliant lighting equipment.
All accessories are specifically for photographic lighting and must be used in conjunction with corresponding lighting equipment; they are not intended for independent use or other purposes. Their professional design and reliable quality aim to meet the diverse lighting needs of professional photographers, live streamers, videographers, and photography enthusiasts, facilitating precise and efficient lighting setups.
Key Product Categories:
- Soft Light Accessories (Softboxes, Soft Umbrellas): Designed to soften light, reduce reflections and shadows, and create even, soft illumination that highlights subject details.
- Light Control Accessories (Honeycomb Grids, Snoots, Barn Doors): Used to concentrate light, control the light spread angle, create distinct light and shadow boundaries, and enhance image depth.
- Mounting Accessories (Light Stands, Adapters, Clamps): Provide stable support for lighting equipment, enable multi-angle lighting, and adapt to various shooting scenarios.
- Control Accessories (Wireless Triggers): Allow remote triggering of flashes, enabling synchronized shooting and enhancing lighting convenience.

3. General Usage Instructions
3.1. Installation and Removal
- Compatibility Check: Before installation, verify that the accessory and lighting equipment models and interfaces match to prevent damage from forced installation. For adapter-type accessories, confirm adapter specifications are fully compatible for a secure connection.
- Installation: Gently align the accessory with the equipment interface according to the instruction manual or interface markings. Press, rotate, or clip to secure, ensuring no looseness or wobbling. For light stands, unfold the legs, adjust height, and lock joints securely to prevent tipping. For soft light accessories, assemble the frame (if applicable) first, then attach the soft cloth, ensuring it is taut and wrinkle-free.
- Removal: After use, turn off the lighting equipment power first. Then, gently remove accessories to avoid forceful pulling, prying, or dropping. For light stands, lower the height, fold the legs, and store. For soft light accessories, remove the soft cloth first, then fold the frame and store separately.
3.2. Daily Use and Maintenance
- Pre-use Inspection: Before use, check the accessory surface for dirt, damage, deformation, or looseness. Ensure interfaces are intact and free from oxidation. Check light stand joints and clips for flexibility. Verify wireless triggers have battery power. If any damage is found, discontinue use immediately.
- During Use: Avoid blocking the heat dissipation vents of lighting equipment to ensure proper cooling. Adjust accessory angle and position according to shooting needs, avoiding forceful pulling or squeezing. Keep wireless triggers away from strong electromagnetic interference (e.g., Wi-Fi, microwaves) to ensure stable signal.
- Cleaning: For dust or dirt on the accessory surface, gently wipe with a dry, soft cloth. For stubborn stains on soft cloth or reflectors, use a soft cloth dampened with a small amount of water, then air dry. Do not use corrosive cleaning agents like alcohol or acetone, as they may damage the material. For metal parts with dust or rust, wipe with a dry cloth and apply a small amount of rust preventative (e.g., for light stands).
- Storage: After removal, categorize accessories and store them in their original storage bags or packaging boxes. Store in a ventilated, dry, and cool environment, away from direct sunlight, high temperatures (above 60°C), humid environments (relative humidity above 80%), and sharp objects. Soft cloth accessories must be dry before storage to prevent dampness and mildew. Metal accessories should avoid contact with water to prevent rust and oxidation. For wireless triggers, remove batteries before storage to prevent battery leakage and damage.
3.3. Specific Usage Instructions (by Category)
- Softboxes/Soft Umbrellas: Avoid prolonged use in high-temperature environments to prevent aging and yellowing of the soft cloth. Ensure the soft cloth fits tightly with the frame during installation to prevent light leakage. After removal, fold neatly to avoid long-term creases affecting the soft light effect.
- Honeycomb Grids/Snoots: Ensure a tight fit with the flash head during use to prevent light deviation due to gaps. Regularly clean grid holes or internal dust to prevent blockages affecting light control. Do not scratch the surface with sharp objects to prevent deformation.
- Light Stands: Place on a stable surface during use. Lock joints after adjusting height to prevent tipping. Do not overload to prevent stand bending or breaking. For outdoor use, take measures to secure it against strong winds to prevent tipping.
- Wireless Triggers: Use original batteries only. Do not use rechargeable or non-original batteries to prevent leakage and damage. Avoid dropping or impact to prevent internal circuit damage. For long-term storage, regularly remove batteries for inspection to prevent battery leakage.
4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | Godox |
| Compatible Brand | GODOX |
| Compatible Model | TT685II (TT685II-C, TT685II-N, TT685II-S, TT685II-F, TT685II-O) |
| Package | Yes |
| Origin | Mainland China |
| High-concerned chemical | None |
| Material | Optical materials, metal alloy, ABS plastic, soft cloth (depending on accessory type) |
| Package Weight | 0.2 kg |
| Package Dimensions | 10cm x 10cm x 10cm |
5. Safety Warnings
5.1. General Safety Warning
WARNING - This product is a professional photography lighting accessory, intended for use by professional personnel or under adult supervision. Improper use may cause personal injury (such as eye damage) or property damage. Read and understand the entire user manual before use. This product complies with the EU General Product Safety Regulation (GPSR) and relevant EU directives.
- Keep this product out of the reach of children. Children must be supervised by adults when near the product to prevent accidental injury, falling, swallowing small parts (if any) or misuse.
- Do not use the product if it is damaged (e.g., cracked, broken, deformed, loose or rusted). Damaged products may fail to function properly and may cause safety hazards such as collapse, falling or damaging the matching lighting equipment.
- This product (except wireless triggers) is not waterproof. Do not immerse it in water or other liquids, and do not use it in rainy or humid environments to avoid damage, mold growth or short circuit of the matching lighting equipment.
- Do not expose the product to high temperatures (exceeding 60°C), open flames, or flammable and volatile solvents (such as alcohol, gasoline, acetone), as this may cause the material to melt, deform, or catch fire, especially for soft cloth and plastic parts.
- Do not disassemble, modify, puncture, heat or cut the product. Unauthorized disassembly or modification will void any warranty and may cause safety hazards. For repair, contact Godox official after-sales service only.
- Do not use non-original accessories or parts. Use only Godox authorized accessories to avoid fire, electric shock or personal injury.
5.2. Specific Warnings for Use with Lighting Equipment
WARNING - When using with Godox series flash/fill light/LED video light, strictly follow the lighting equipment's safety instructions. The flash operates at high voltage, and internal capacitors may remain charged for a period after shutdown, which may cause electric shock.
- Do not look directly at the light source (especially the eyes of infants and children) when the lighting equipment is in use, as this may cause eye damage. If eye discomfort occurs, stop using immediately and seek medical attention.
- When installing or removing the accessory, ensure the lighting equipment is turned off and disconnected from the power source (battery or power adapter) to avoid electric shock or injury from high-voltage components.
- Maintain a distance of at least 1 meter between the lighting equipment (with the accessory installed) and users, other personnel, and heat-sensitive or flammable items during operation to avoid burns or fire.
- Do not cover the lighting equipment's heat dissipation vents when using the accessory, as this may cause the equipment to overheat, malfunction or even catch fire.
- Ensure the accessory is firmly connected to the lighting equipment before use to prevent it from falling and causing injury or damage. For light stands, ensure they are placed on a flat surface and locked securely to avoid tipping.
- For wireless triggers, use only original batteries. Do not use rechargeable batteries or non-original batteries to avoid leakage and damage to the product.
6. Environmental and Disposal Warnings
- This product is made of optical materials, metal alloy, ABS plastic and/or soft cloth (depending on the accessory type). Dispose of it in accordance with local environmental protection laws and regulations in the EU member states. Do not discard it as household waste arbitrarily.
- When disposing of the product, separate different materials (soft cloth, metal parts, plastic parts, electronic components) and hand them over to a professional recycling agency to ensure environmental protection and compliance with EU EPR (WEEE) regulations.
- Do not burn the product, as it may produce harmful gases that are harmful to the environment and human health. For wireless triggers, remove the battery before disposal and dispose of the battery in accordance with local battery recycling regulations.
7. Compliance and Warranty
- This product complies with the EU General Product Safety Regulation (GPSR), EU Directives 2014/35/EU, 2014/30/EU and RoHS Directive 2011/65/EU. For more detailed safety information, please refer to the official user manual or contact the EU responsible person.
- The use of this product in the EU must comply with the local laws and regulations of each member state. Any non-compliant use shall be the responsibility of the user.
- This product has a limited 1-year warranty. Damage caused by improper use, disassembly, modification, misuse or use of non-original accessories is not covered by the warranty.
- This product is not intended for use in medical, automotive, or explosion-proof environments. Misuse may result in serious injury or property damage.
- The CE marking on this product indicates that it meets the mandatory requirements of EU regulations and can be freely circulated in the EU single market. The manufacturer is responsible for the compliance of the product.
Manufacturer Information:
GODOX Photo Equipment Co., Ltd.
Address: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen 518103, China
Email: godox@godox.com
Tel: +86-755-29609320
8. Troubleshooting
This section addresses common issues and their potential solutions. If you encounter a problem not listed here, or if the suggested solutions do not resolve the issue, please contact Godox official after-sales service.
Common Issues & Solutions:
- Accessory does not fit or is loose: Ensure correct model compatibility and interface alignment. Do not force installation. Check for damage to the accessory or equipment interface.
- Wireless trigger signal instability: Ensure the trigger is not near strong electromagnetic interference sources (e.g., Wi-Fi routers, microwaves). Check battery level and replace if necessary.
- Light stand instability: Ensure the stand is placed on a flat, stable surface. All joints should be securely locked. Do not exceed the maximum load capacity. For outdoor use, add weights or secure against wind.
- Soft light effect is uneven or has light leakage: Ensure soft cloth is properly attached and taut, with no wrinkles or gaps. Check for proper assembly of soft light accessories.
- Accessory appears damaged or deformed: Discontinue use immediately. Do not attempt to repair it yourself. Contact Godox official after-sales service.
9. User Tips
- Quality Assurance: Users have noted that the hot shoe base is often made of metal, contributing to a sturdy feel similar to original equipment.
- Compatibility Check: Always double-check the specific TT685II sub-model (e.g., TT685II-C, TT685II-N) to ensure you select the correct hot shoe accessory for your flash unit. Each sub-model requires its corresponding hot shoe.
- Material Insight: While the hot shoe base is typically metal, other components of the accessory may be made from high-quality ABS plastic, as detailed in the specifications.