OBO HANDS K10 Standalone RFID Access Control Keypad User Manual

1. Introduction

The OBO HANDS K10 is a standalone RFID Access Control Keypad designed for secure entry management in homes and offices. It supports multiple unlocking methods including RFID card, password, and a combination of both, offering flexibility and enhanced security. With a capacity for up to 1000 users, this device is a reliable solution for managing access to your premises.

OBO HANDS K10 Standalone RFID Access Control Keypad with included keyfobs — Figure 1: OBO HANDS K10 Access Control Keypad with RFID Keyfobs

2. Key Features

Multiple Unlocking Methods: Supports RFID card, password, and RFID card + password for versatile access.
High User Capacity: Accommodates up to 1000 users.
Durable Construction: Made from high-quality ABS plastic, featuring a surface waterproof and dustproof panel.
Wiegand 26/34 Output: Compatible with various access control systems.
Doorbell Function: Integrated doorbell button for visitor notification.
Normally Open Mode: Can be configured for frequent entry/exit scenarios.
Smart Original Chip: Ensures fast recognition speed and high sensitivity.

Keypad features including password keyboard, smart chip, and wiring diagram indication — Figure 2: Keypad features highlighting the password keyboard and smart chip.

3. Specifications

Feature	Detail
Model Number	K10
Brand Name	OBO HANDS
User Capacity	1000 users
Material	High quality Plastic (ABS)
Working Voltage	DC12V
Static Current	≤ 30mA
Waterproof Level	Surface waterproof (Not IP65, cannot be used under direct rain)
Working Frequency	125KHz
Card Type	EM Card
Unlock Method	RFID Card, Password, RFID Card + Password
Doorbell Function	Support
WG Interface	WG26 / WG34
Door Opening Time	0-99 seconds
Ambient Temperature	-20 ℃ to 70 ℃
Dimensions	118mm (H) x 77mm (W) x 21mm (D)

Dimensions of the OBO HANDS K10 Access Control Keypad — Figure 3: Keypad dimensions (118mm H x 77mm W x 21mm D).

Labeled components of the OBO HANDS K10 Keypad, including work indicator, digital buttons, doorbell button, card area, speaker, high quality relay, and power cable socket. — Figure 4: Labeled components of the K10 Keypad.

4. Package Contents

The standard package includes:

1 x OBO HANDS K10 Access Control Keypad
10 x 125KHz RFID Keyfobs (color may vary)
1 x User Manual (this document)
Wiring harness

Note: Power supply, electric lock, and exit button are NOT included and must be purchased separately.

Image showing a set of 10 RFID keyfobs in various colors — Figure 5: Included RFID Keyfobs.

5. Setup and Installation

5.1 Mounting the Keypad

Choose a suitable location for the keypad, ideally near the door it will control. Ensure it is protected from direct rain if not using a rainproof cover.
Use the provided mounting template (if available) or mark the drilling points on the wall.
Drill holes for mounting screws and wiring.
Secure the keypad base to the wall using appropriate screws.
Connect the wiring as per the diagram below.
Attach the keypad front panel to the base.

5.2 Wiring Diagram

Carefully follow the wiring diagram to connect the access controller to the power supply, electric lock, exit button, and doorbell. Incorrect wiring can damage the device or connected components.

Detailed wiring diagram for the OBO HANDS K10 Access Controller, showing connections to power supply, electric locks, exit button, and door bell. — Figure 6: Wiring Diagram for the K10 Access Control System. (Power supply, lock, and exit button are not included).

5.3 Outdoor Installation (with Rainproof Cover)

If installing outdoors, it is highly recommended to use a rainproof cover to protect the keypad from weather elements. The K10 keypad is surface waterproof but not rated for direct exposure to heavy rain.

OBO HANDS K10 Keypad installed outdoors with a rainproof cover during rain — Figure 7: Keypad used with an optional rainproof cover for outdoor installation.

Dimensions of the optional rainproof cover for the keypad — Figure 8: Rainproof Cover Dimensions.

6. Operating Instructions

6.1 Programming the Keypad

The default programming password is 123456. It is highly recommended to change this immediately after installation.

Enter Programming Mode: Press * then enter the current programming password (default: 123456), then press #. The indicator light will change.
Change Programming Password: In programming mode, press 0, enter new 6-digit password, press #, re-enter new 6-digit password, press #.
Add User (RFID Card): In programming mode, press 1, present the RFID card to the card area, press #. Repeat for additional cards.
Add User (Password): In programming mode, press 2, enter a 4-6 digit user password, press #, re-enter the password, press #.
Add User (RFID Card + Password): In programming mode, press 3, present the RFID card, then enter a 4-6 digit user password, press #, re-enter the password, press #.
Delete User (RFID Card): In programming mode, press 4, present the RFID card to be deleted, press #.
Delete User (Password): In programming mode, press 5, enter the user password to be deleted, press #.
Delete All Users: In programming mode, press 6, then press # to confirm. Caution: This will delete all registered cards and passwords.
Set Door Opening Time: In programming mode, press 7, enter the desired delay time in seconds (0-99), press #.
Exit Programming Mode: Press * to exit programming mode.

6.2 Unlocking Methods

The K10 keypad supports three primary unlocking methods:

RFID Card Verification: Present a registered RFID card to the card area.
Password Verification: Enter a registered user password, then press #.
RFID Card + Password Verification: Present a registered RFID card, then enter the associated user password, then press #.

Diagram illustrating RFID Card Verification, Password Verification, and combined Password + RFID Card Verification methods — Figure 9: Three unlocking methods: RFID Card, Password, and RFID Card + Password.

6.3 Doorbell Function

Press the bell icon button on the keypad to activate the connected doorbell.

6.4 Demonstration Video

Watch this video for a visual demonstration of the keypad's features and unlocking methods:

Video 1: Demonstration of OBO HANDS K10 Access Control Keypad unlocking methods (RFID card, password, remote control, exit button) and doorbell function.

7. Maintenance

Cleaning: Wipe the keypad surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
Environmental Protection: Ensure the keypad is protected from extreme temperatures, humidity, and direct water exposure (unless a rainproof cover is used for outdoor installations).
Regular Checks: Periodically check all wiring connections to ensure they are secure.
Backup: Keep a record of all registered RFID cards and passwords in a secure location.

8. Troubleshooting

Keypad does not power on:: Check the power supply connection and ensure it is providing the correct DC12V. Verify all wiring connections are secure.
RFID card or password does not unlock the door:: Ensure the card or password is correctly registered. Check if the keypad is in programming mode (exit programming mode by pressing *). Verify the electric lock is receiving power and is correctly wired.
Doorbell does not ring:: Check the wiring connection to the doorbell. Ensure the doorbell itself is functional.
Keypad buttons are unresponsive:: Ensure the keypad is receiving stable power. If the issue persists, a factory reset might be necessary (refer to programming instructions for deleting all users, which often resets settings).

9. User Tips

Change Default Password: Always change the default programming password (123456) immediately after installation to enhance security.
Test All Methods: After adding new users or making programming changes, test all unlocking methods (RFID, password, combined) to ensure they function correctly.
Consider a Rainproof Cover: For outdoor installations, even if under a slight overhang, a dedicated rainproof cover significantly extends the lifespan and reliability of the keypad.
Keep a User Log: Maintain a separate, secure record of all registered RFID card IDs and user passwords for easy management and troubleshooting.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

OBO HANDS K10