1. Introduction
This manual provides essential information for the safe and efficient use of your Ubiolabs 15V 2.5A Power Adapter, Model CHG1151SG. This adapter is specifically designed to provide power to compatible devices, such as the Ubiolabs AWC1040 and WCB261 Wireless Phone Charging Stands. Please read this manual thoroughly before use and retain it for future reference.
2. Safety Information
- Use only with the specified input voltage range (100-240V AC).
- Do not expose the adapter to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the adapter to severe impact.
- Do not attempt to open, modify, or repair the adapter. Refer servicing to qualified personnel.
- Ensure the adapter is properly ventilated and not covered during operation.
- Keep out of reach of children.
- Disconnect from the power outlet when not in use for extended periods.
3. Product Overview
The Ubiolabs 15V 2.5A Power Adapter is a compact and reliable power supply unit. It features an integrated AC plug for direct wall connection and a DC output cable with a barrel connector for your device.
4. Specifications
| Feature | Detail |
|---|---|
| Model Number | CHG1151SG |
| Input | 100-240V~, 50-60Hz, 0.8A |
| Output | 15V, 2.5A |
| DC Connector Size | 4mm (Outer Diameter) / 1.5mm (Inner Diameter) |
| Compatibility | Ubiolabs AWC1040, WCB261 Wireless Phone Charging Stands |
| Certifications | FCC, UKCA, UL Listed |
| Origin | Mainland China |
| Package Dimensions (approx.) | 18cm (L) x 15cm (W) x 8cm (H) |
| Package Weight (approx.) | 0.15 kg |
5. Setup
- Unpack: Carefully remove the power adapter from its packaging.
- Inspect: Check the adapter and its cable for any signs of damage. Do not use if damaged.
- Connect to Device: Insert the DC barrel connector of the power adapter firmly into the corresponding power input port on your Ubiolabs AWC1040 or WCB261 Wireless Phone Charging Stand.
- Connect to Power Outlet: Plug the integrated AC prongs of the power adapter into a standard wall power outlet (100-240V AC).
- Verify Power: Your charging stand should now receive power. Refer to your charging stand's manual for specific power indicator lights or startup procedures.
6. Operating Instructions
Once properly set up, the Ubiolabs 15V 2.5A Power Adapter operates automatically to provide continuous power to your connected device. No further user interaction is typically required for its basic function.
- Ensure the adapter remains securely plugged into both the wall outlet and your device during operation.
- If your device has an on/off switch, use that to control its power state, not by repeatedly plugging/unplugging the adapter.
7. Maintenance
- Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
- Inspection: Periodically check the cable and connector for any signs of wear, fraying, or damage. Replace the adapter if any damage is observed.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on/charging | Adapter not properly plugged in. Power outlet is not active. Adapter or cable is damaged. Device is incompatible or faulty. |
Ensure both ends of the adapter are securely connected. Test the power outlet with another device. Inspect adapter and cable for damage; replace if necessary. Verify device compatibility and functionality with another power source if possible. |
| Adapter feels hot | Normal operation (slight warmth). Overload or poor ventilation. |
A slight warmth is normal. If it's excessively hot, disconnect immediately. Ensure adapter is not covered and has adequate airflow. Verify the connected device's power requirements do not exceed the adapter's output. |
8.1 User Tips
No specific user tips were available from provided reviews or Q&A content for this product.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the original seller or Ubiolabs customer service directly. Keep your purchase receipt as proof of purchase.
