1. Product Overview
This manual provides essential information for the installation, maintenance, and troubleshooting of the engine mounts designed for Ford Ranger 3.2 Tdci models manufactured between 2015 and 2018. These engine mounts are critical components that support the engine and transmission, absorbing vibrations and shocks to ensure a smooth and stable driving experience.
Figure 1: A set of two engine mounts as supplied.
2. Safety Information
WARNING: Installation of engine mounts involves working with heavy vehicle components and potentially dangerous tools. Improper installation can lead to serious injury or vehicle damage. It is highly recommended that installation be performed by a qualified professional technician.
- Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves.
- Ensure the vehicle is securely supported on jack stands or a lift before beginning any work.
- Disconnect the vehicle's battery before working on electrical components.
- Refer to the vehicle manufacturer's service manual for specific torque specifications and procedures.
3. Setup and Installation
These engine mounts are designed as direct replacements for the specified Ford Ranger models. While a detailed step-by-step guide is beyond the scope of this general manual, the following outlines the typical process:
- Preparation: Park the vehicle on a level surface, engage the parking brake, and chock the wheels. Raise the vehicle and support it securely.
- Access: Depending on the specific mount location (left, right, front, rear), you may need to remove other components to gain access.
- Support the Engine: Use a suitable engine hoist or jack with a wooden block to support the engine's weight. Ensure the engine is adequately supported before removing any mounts.
- Remove Old Mount: Loosen and remove the bolts securing the old engine mount to the engine and the vehicle frame. Carefully remove the old mount.
- Install New Mount: Position the new engine mount in place. Hand-tighten the bolts to align the mount.
- Tighten Bolts: Refer to the Ford Ranger service manual for the correct torque specifications for all mounting bolts. Tighten bolts to the specified torque.
- Lower Engine: Slowly lower the engine onto the new mount, ensuring proper seating.
- Reassemble: Reinstall any components removed for access.
- Final Check: Double-check all bolts for tightness and ensure no tools or debris are left in the engine bay.
Figure 2: Front view of the engine mounts, showing mounting points.
Figure 3: Side profile of a single engine mount.
4. Operating Principles
Engine mounts are passive components that serve two primary functions:
- Engine Support: They securely hold the engine and transmission in place within the vehicle's chassis.
- Vibration Isolation: They are designed with rubber or hydraulic elements to absorb engine vibrations and road shocks, preventing them from being transmitted to the vehicle's cabin and providing a smoother ride.
There are no specific 'operating' steps for engine mounts as they function continuously once installed. Their performance is critical for vehicle comfort and structural integrity.
5. Maintenance
Regular inspection of engine mounts is recommended as part of routine vehicle maintenance. Look for the following signs of wear or damage:
- Cracks or Tears: Inspect the rubber components for any visible cracks, tears, or deterioration.
- Fluid Leaks: If your vehicle uses hydraulic engine mounts, check for any signs of fluid leakage.
- Excessive Movement: With the engine running and the vehicle in park, observe if the engine moves excessively when shifting between drive and reverse.
- Corrosion: Check metal parts for rust or corrosion that could compromise structural integrity.
If any of these signs are present, it is advisable to have the mounts inspected by a professional and replaced if necessary.
6. Troubleshooting
Common symptoms of failing engine mounts include:
- Excessive Vibrations: Increased vibration felt in the steering wheel, floor, or seats, especially at idle or specific RPMs.
- Clunking or Banging Noises: Audible noises when accelerating, braking, shifting gears, or driving over bumps.
- Engine Movement: Visible or felt excessive movement of the engine when starting, stopping, or under load.
- Misalignment: Components connected to the engine (e.g., exhaust, driveshaft) may show signs of misalignment or premature wear due to engine sag.
If you experience any of these symptoms, have your vehicle inspected by a qualified mechanic to diagnose the issue and determine if engine mount replacement is required.
7. Specifications
| Feature | Specification |
|---|---|
| Product Name | Engine Mount |
| Compatibility | Ford Ranger 3.2 Tdci (2015-2018) |
| OEM Part Numbers | EB3G-6B032-FA, EB3G-6B032-EA, EB3G-6038-FA, EB3G-6038-EA, EB3G6B032EA, EB3G6038DC |
| Quantity | A set of 2 pieces |
| Package Dimensions (L x W x H) | 25 cm x 25 cm x 15 cm |
| Package Weight | 5.0 kg |
| Origin | Mainland China |
8. Warranty and Support
For specific warranty terms and conditions, please refer to the seller or your purchase documentation. If you have any questions regarding the product, installation, or compatibility, please contact the seller directly for assistance.
9. User Tips
- Always verify the compatibility of the engine mounts with your specific vehicle model and year before purchase and installation. Cross-reference OEM part numbers to ensure a correct fit.
- Consider replacing engine mounts in pairs or as a complete set if multiple mounts show signs of wear, as this can help maintain balanced engine support and vibration dampening.