FIIL CC Nano

Contents

FIIL CC Nano Wireless Earbuds User Manual

Your guide to an immersive audio experience.

Introduction

Welcome to the world of high-fidelity audio with your new FIIL CC Nano wireless earbuds. Designed with an all-metal aesthetic and advanced features, these earbuds offer superior sound quality, intelligent noise cancellation, and seamless connectivity. This manual will guide you through the setup, operation, and maintenance of your device.

FIIL CC Nano earbuds and charging case with key features listed
FIIL CC Nano: All-Metal Design, Dual-Mic AI ENC, Multipoint connection, LDP diaphragm, Bluetooth 5.2.
FIIL CC3 earbuds and charging case with key features listed
FIIL CC3: 13mm wool basin composite diaphragm, AI precise noise reduction, 45° high gloss cut angle design charging case, Hi-Res Audio Wireless.

Important Notice: Effective May 2026, support for the FIIL App will be temporarily suspended due to software upgrades.

Package Contents

Ensure all items are present in your package:

  • FIIL CC Nano Earbuds
  • Charging Case
  • USB Type-C Charging Cable
  • User Manual (this document)

Setup Guide

1. Charging Your Earbuds and Case

Before first use, fully charge your FIIL CC Nano earbuds and charging case.

  1. Place the earbuds into the charging case.
  2. Connect the USB Type-C cable to the charging port on the case and to a power source.
  3. The indicator lights on the case will show the charging status.

Charging Times:

  • Earbuds: Approximately 50 minutes
  • Charging Case: Approximately 100 minutes
Hand connecting a USB-C cable to the FIIL CC Nano charging case
Connect the USB-C cable to charge the case and earbuds.

2. Pairing with Your Device

The FIIL CC Nano earbuds use Bluetooth 5.2 for stable and efficient wireless connection.

  1. Open the charging case. The earbuds will automatically enter pairing mode (indicated by flashing lights, refer to the PDF manual for specific light patterns).
  2. On your device (smartphone, tablet, computer), enable Bluetooth.
  3. Search for "FIIL CC Nano" in the list of available Bluetooth devices and select it to pair.
  4. Once paired, the earbuds will automatically connect to your device when taken out of the case and Bluetooth is enabled.
Image showing a laptop and a smartphone, demonstrating multipoint connection with FIIL CC Nano earbuds
FIIL CC Nano supports connecting to two devices simultaneously, such as a PC and a smartphone.

Operating Instructions

1. Basic Controls (Touch Control)

The FIIL CC Nano earbuds feature intuitive touch controls. Refer to the official PDF user manual for a detailed diagram of touch gestures and their corresponding functions (e.g., play/pause, skip track, answer/end call, activate voice assistant).

The product video demonstrates the powerful touch control functionality.

Product demonstration video showing convenient sliding design, comfortable wear, multipoint connection, powerful touch control, Dual-Mic ENC, and fiil+ APP customization.

2. Multipoint Connectivity

The FIIL CC Nano supports connecting to two devices simultaneously. For example, you can be connected to both your PC and your smartphone. If you are listening to music on your PC and receive a call on your smartphone, the earbuds will automatically switch to the call when you double-tap to answer.

3. Noise Cancellation (ENC)

The earbuds feature Dual-Mic AI ENC (Environmental Noise Cancellation) with intelliGo AI technology and a DNN neural network algorithm for clearer call experiences. The FIIL CC Nano provides 21dB (90% ambient noise) ENC.

Image showing a person wearing FIIL CC Nano earbuds with text 'Dual-mic beamforming with A.I. Algorithm ENC' and 'intelliGo AI algorithm support'
Dual-Mic AI ENC for clear calls, supported by intelliGo AI algorithm.

Note: For FIIL CC3 variant, the packaging claims "50dB Ultra-Deep 50dB Noise Cancelling" and "AI Adaptive Noise Cancellation System". Please refer to the specific product documentation for your model.

4. FIIL+ App Features

The fiil+ App unlocks advanced customization and features for your earbuds. (Note: App support will be temporarily suspended effective May 2026).

  • Power Display: View battery levels for both earbuds and the charging case.
  • EQ Options: Choose from 15 preset EQ settings or create your own custom EQ.
  • Touch Modes: Switch between Easy Mode and Full Control Mode for touch gestures.
  • Low Latency Modes: Optimize audio for different scenarios: Game, Music, and Video.
Multiple smartphone screens showing the FIIL+ app interface with options like 3D Sound, Voice Assistant, Firmware Version, Advanced Settings, and EQ customization
The fiil+ App allows customization of EQ, touch controls, and other settings.
Image showing a person playing guitar with a smartphone displaying the FIIL+ app's custom EQ settings
Customize your sound with the fiil+ App's EQ function.

5. Low Latency Modes

To ensure audio and video synchronization, especially during gaming or video playback, activate the appropriate Low Latency Mode via the fiil+ App. This feature helps provide a worry-free audio and video experience.

FIIL CC Nano earbuds near a Nintendo Switch console, illustrating low latency mode for gaming
Low Latency Modes for optimized audio-video synchronization in game, music, and video scenarios.

Maintenance

Cleaning

To maintain optimal performance and hygiene:

  • Gently wipe the earbuds and charging case with a soft, dry, lint-free cloth.
  • Avoid using abrasive materials, solvents, or harsh chemicals.
  • Ensure the charging contacts on both the earbuds and the case are clean and dry.

Water Resistance

The FIIL CC Nano earbuds are rated IPX4 water-resistant. This means they are protected against splashing water from any direction. They are not waterproof and should not be submerged in water. The charging case is not water-resistant.

Storage

When not in use, store the earbuds in their charging case to protect them and keep them charged. Store the device in a cool, dry place away from extreme temperatures.

Troubleshooting

If you encounter issues with your FIIL CC Nano earbuds, try the following solutions:

  • Earbuds not pairing/connecting:
    • Ensure Bluetooth is enabled on your device.
    • Make sure the earbuds and charging case are sufficiently charged.
    • Try placing the earbuds back in the case, closing it, and then reopening to re-enter pairing mode.
    • Forget the device in your phone's Bluetooth settings and try pairing again.
  • No sound or poor sound quality:
    • Check the volume levels on both your device and the earbuds.
    • Ensure the earbuds are properly seated in your ears.
    • Clean any debris from the earbud nozzles and ear tips.
    • If using the fiil+ App, check the EQ settings.
  • Earbuds voice prompts in an unexpected language (e.g., Chinese):
    • Check the fiil+ App settings for a language option. Some earbuds allow changing voice prompt language through the companion app.
    • If no option is available in the app, consult the official PDF user manual or contact customer support for specific instructions on changing voice prompt language.
  • App not functioning correctly:
    • Ensure your fiil+ App is updated to the latest version.
    • Restart the app or your smartphone.
    • Remember that app support will be temporarily suspended effective May 2026.

Specifications (FIIL CC Nano)

Detailed product specifications for FIIL CC Nano earbuds
Visual representation of FIIL CC Nano product specifications.
FeatureSpecification
ModelFIIL CC Nano
Bluetooth Version5.2
Radio Range>10 meters
Bluetooth CodecsAAC, SBC, LDAC
Environmental Noise Cancellation (ENC)21dB (90% ambient noise)
Earbuds Weight~4g/each
Charging Case Weight~31g
Water ResistanceIPX4 (earbuds)
Battery Life (Single Charge)Up to 5.5 hours
Total Battery Life (with Charging Case)Up to 30 hours
Earbuds Battery Capacity38mAh
Charging Case Battery Capacity400mAh, 3.7V
Earbuds Charging Time50 minutes
Case Charging Time100 minutes
Speaker Dimensionφ13.1mm tailor-made LDP diaphragm
Speaker Impedance32Ω
Frequency Response Range15 - 22000Hz
Speaker Sensitivity126dBSPL/V @1KHz
Speaker Distortion<3% @1mw
MaterialMetal, TPU
Sound IsolatingYes
Number Of Drivers2
With MicrophoneYes
Volume ControlYes
Control ButtonYes
Support APPYes
CertificationCE

User Tips

  • Voice Prompt Language: If your earbuds' voice prompts are in an unexpected language, check the fiil+ App for language settings. If the app does not offer this option, refer to the comprehensive PDF user manual or contact customer support for assistance.
  • Optimal Fit: Experiment with different ear tip sizes to find the most comfortable and secure fit. A good seal is crucial for sound quality and effective noise cancellation.
  • App Customization: Take advantage of the fiil+ App's EQ and low-latency modes to tailor your audio experience to your preferences and activity (e.g., gaming, music, video).

Warranty and Support

For detailed warranty information, please refer to the official documentation provided with your product. You can also find additional item guides and documents, including a user manual in PDF format, at the following link: FIIL CC Nano User Manual (PDF).

If you receive a defective product or have any other issues, please contact customer service with a video or photo of the product. They will assist you in resolving the problem.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.