1. Product Overview
The OIVO Horizontal Cooling Stand is designed to provide stable horizontal placement for your PlayStation 5 console while offering enhanced cooling and, for model IV-P5257, convenient controller charging. It is compatible with both PS5 Disc and Digital Editions.
Package Contents:
- 2 x Stand components for PS5 console
- 1 x EVA Foam (for PS5 Digital Edition)
- 1 x Screw
- (PS5 Console and controllers are not included)
Figure 1: Product Overview (Model IV-P5257 shown)
Compatibility:
- Compatible with PlayStation 5 Disc Edition
- Compatible with PlayStation 5 Digital Edition
- NOT compatible with PS5 Slim or PS5 Pro consoles.
Figure 2: Compatibility and Dimensions
Figure 3: Incompatibility with PS5 Slim/Pro
2. Setup Instructions
Follow these steps to correctly install your PS5 console onto the OIVO Horizontal Stand:
- Prepare the Stand: If you have a PS5 Digital Edition, insert the provided EVA foam into the left stand component. This foam ensures a snug fit for the slimmer Digital Edition console.
- Attach the Left Stand: Place the PS5 console upside down. Align the left stand component with the console's base and secure it using the provided screw. This locks the stand firmly to the console.
- Attach the Right Stand: Position the console vertically. Slide the right stand component onto the console's base until it clicks into place.
- Connect Power (Model IV-P5257 only): For the cooling and charging functions, connect the stand's USB-C power cable to a compatible USB-C port on the front of your PS5 console.
- Prepare Controllers for Charging (Model IV-P5257 only): Insert a USB dongle into the charging port of each PS5 controller you wish to charge. Ensure the dongle is fully inserted for proper connection.
- Place Controllers on Charger (Model IV-P5257 only): Place the controllers onto the designated charging docks on the stand. The charging indicators will illuminate (Red for charging, Green for fully charged/standby).
Figure 4: Easy Installation Steps
Figure 5: Correct USB Dongle Insertion
3. Operating Instructions (Model IV-P5257 only)
Cooling System:
The IV-P5257 model features a silent and powerful cooling system with dual fans to dissipate heat from your PS5 console. The fans operate at high speeds (up to 4500 RPM) while maintaining low noise levels.
- Fan Switch: Locate the fan switch button on the stand. Pressing this button cycles through the three available fan speeds:
- Strong Blue: 4500 RPM (Maximum cooling)
- Moderate Blue: 4000 RPM (Balanced cooling)
- Weak Blue: 3500 RPM (Quiet operation)
- The fan speed indicator will change color to reflect the current setting.
Figure 6: Cooling System Operation
Controller Charging:
The stand can charge two PS5 controllers simultaneously. Charging typically takes 3-3.5 hours for a full charge.
- Charging Indicators: Each charging dock has an indicator light:
- Red: Controller is currently charging.
- Green: Controller is fully charged or in standby mode.
- Ensure the USB dongles are securely inserted into the controllers before placing them on the charging docks.
Video 1: Product Demonstration (shows installation, cooling, and charging features)
4. Maintenance
- Cleaning: Regularly wipe the stand and charging docks with a soft, dry cloth to remove dust. Do not use liquid cleaners or abrasive materials.
- Fan Vents: Ensure the fan vents (on Model IV-P5257) are clear of obstructions to maintain optimal airflow.
- Storage: When not in use for extended periods, disconnect the stand from the PS5 console and store it in a dry, dust-free environment.
5. Troubleshooting
- Stand is unstable: Ensure the screw for the left stand component is securely tightened. Verify that the right stand component is fully clicked into place.
- Controllers not charging (Model IV-P5257):
- Check that the stand's power cable is securely connected to the PS5 console.
- Ensure the USB dongles are fully inserted into the controllers.
- Verify that the controllers are correctly seated on the charging docks.
- If only one controller is not charging, try swapping its dongle with another or testing the controller on a different dock.
- Cooling fans not working (Model IV-P5257):
- Confirm the stand's power cable is connected to the PS5.
- Press the fan switch button to ensure it's not in the 'off' position or cycling through modes.
- Check for any obstructions blocking the fan blades.
6. Specifications
| Feature | Description |
|---|---|
| Model Numbers | IV-P5257 (Cooling Stand with Charger), IV-P5222 (Stand Only) |
| Compatible Consoles | PlayStation 5 Disc Edition, PlayStation 5 Digital Edition |
| Incompatible Consoles | PS5 Slim, PS5 Pro |
| Cooling Fans (IV-P5257) | Dual fans with 3 speed modes (3500 RPM, 4000 RPM, 4500 RPM) |
| Controller Charging (IV-P5257) | Charges 2 PS5 controllers simultaneously (3-3.5 hours) |
| Power Source | USB-C from PS5 console |
| Product Dimensions (approx.) | Length: 18.90 in (48 cm) Width: 10.24 in (26 cm) Height (console on stand): 4.72 in (12 cm) Total Height (with controllers): 5.9 in (15 cm) |
| Package Weight | 0.5 kg |
| Package Dimensions | 30 cm x 10 cm x 10 cm |
7. User Tips
- Enhanced Stability: This horizontal stand significantly improves the stability of your PS5 console compared to the original stand, reducing the risk of accidental knocks.
- Optimal Airflow: For Model IV-P5257, utilize the cooling fans, especially during extended gaming sessions, to help maintain optimal console temperature and performance.
- Secure Controller Charging: Always ensure the USB dongles are fully inserted into your controllers and that the controllers are properly seated in the charging docks for reliable charging.
Figure 7: Improved Stability with OIVO Stand
8. Warranty and Support
For any issues, questions, or support regarding your OIVO PS5 Horizontal Cooling Stand or Horizontal Stand, please contact the seller or manufacturer directly. Keep your purchase receipt for warranty claims, if applicable.
