1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your taslauk Mi BOX Light CCT 3 PIN Controller (Model FUT035) and its accompanying 2.4G RF Wireless 4-Zone Touch Remote (Model FUT007). This system is designed to control CCT (Correlated Color Temperature) LED strips, allowing for dimming, color temperature adjustment, and multi-zone control.

2. Product Specifications
2.1 FUT035 CCT LED Strip Controller
| Feature | Specification |
|---|---|
| Model No. | FUT035 |
| Voltage | DC12V-24V |
| Output | Max. 6A/Channel, Total output Max. 10A |
| Wattage | 120W |
| Control Distance | 30m (Max) |
| Size | 85 x 45 x 22.5 mm |
| Applicable Lights | 4-Zone White / Warm white Flexible LED Strip |
| Connection Mode | Common Anode |
| Power Source | DC |
| Certification | CCC, ROHS, CE |
2.2 FUT007 2.4G RF Wireless 4-Zone Touch Remote
| Feature | Specification |
|---|---|
| Model No. | FUT007 |
| Transmitting Power | 6dBm |
| Standby Power Consumption | 20uA |
| Modulation Method | GFSK |
| Size | 138 x 56 x 20 mm |
| Power | 2x AAA Battery (Not included) |
| Control Distance | 30m |
| Features | Dimming, color changing, saturation control, color temperature adjustable (16 million colors) |
3. Setup Instructions
3.1 Component Overview


3.2 Wiring the FUT035 Controller
Connect the FUT035 controller to your DC12V-24V power supply and CCT LED strip as shown in the diagram below. Ensure correct polarity for both input and output connections.

- Power Input: Connect your DC12V-24V power supply to the 'POWER' input terminals (V+ and V-) on the FUT035 controller.
- LED Strip Output: Connect your CCT LED strip to the 'OUTPUT' terminals (V+, CW, WW) on the FUT035 controller. Ensure the V+ of the LED strip connects to V+ on the controller, CW to CW, and WW to WW.
3.3 Remote Control Battery Installation (FUT007)
The FUT007 remote control requires 2x AAA batteries (not included). Open the battery compartment on the back of the remote and insert the batteries, observing the correct polarity (+/-) markings.
3.4 Linking (Pairing) Controller and Remote
To establish communication between the FUT035 controller and the FUT007 remote, you need to link them:
- Ensure the LED strip connected to the FUT035 controller is powered off.
- Power on the LED strip.
- Within 3 seconds of powering on, briefly touch any of the Zone-ON buttons (1, 2, 3, or 4) on the FUT007 remote 3 times.
- If the linking is successful, the LED strip will blink 3 times with a green color. If not, repeat the process.
3.5 Unlinking Controller and Remote
If you need to unlink a controller from a remote (e.g., to re-assign it to a different zone or remote):
- Ensure the LED strip connected to the FUT035 controller is powered off.
- Power on the LED strip.
- Within 3 seconds of powering on, briefly touch the previously linked Zone-ON button (1, 2, 3, or 4) or the Master-ON button on the FUT007 remote 5 times.
- If the unlinking is successful, the LED strip will blink 10 times with a red color. If not, repeat the process.
4. Operating Instructions
The FUT007 remote control allows for intuitive control of your CCT LED strips:
- Master ON/OFF: The large 'I' button at the top turns all linked zones ON, and the 'O' button turns all linked zones OFF.
- Zone Control: Use the '1', '2', '3', '4' buttons to select a specific zone. Press the corresponding 'ON' button to turn a zone on, and 'OFF' to turn it off.
- Brightness/Dimming: Use the touch ring to adjust the brightness of the selected zone or all zones (if Master ON is selected).
- Color Temperature Adjustment: The touch ring also allows you to adjust the color temperature from warm white to cool white.
- Saturation Control: The remote supports saturation control, allowing fine-tuning of the white light quality.
- 16 Million Colors: The system offers a wide range of color temperature options.
5. Maintenance
- Remote Control Batteries: Replace the 2x AAA batteries in the FUT007 remote control when its performance degrades or it stops responding.
- Cleaning: Use a soft, dry cloth to clean the controller and remote. Do not use harsh chemicals or abrasive materials.
- Environment: Keep both devices in a dry environment, away from direct sunlight, high temperatures, and excessive humidity.
6. Troubleshooting
- Remote not responding / Lights not linking:
- Check if the remote control batteries are fresh and correctly inserted.
- Ensure the FUT035 controller is receiving power (DC12V-24V).
- Carefully repeat the linking procedure, ensuring you press the Zone-ON button within 3 seconds of powering on the LED strip.
- Verify that the remote is within the effective control distance of 30 meters.
- Lights not changing color/brightness:
- Double-check all wiring connections to the FUT035 controller, especially V+, CW, and WW.
- Confirm that the LED strip you are using is a CCT (Color Correlated Temperature) type and compatible with this controller.
- Ensure the controller is correctly linked to the remote control for the specific zone you are trying to adjust.
- Intermittent control:
- Reduce the distance between the remote and the controller.
- Check for potential sources of 2.4Ghz interference in the vicinity.
7. User Tips
- For optimal performance, ensure the remote control has fresh batteries.
- When linking multiple controllers, link them one by one to avoid confusion and ensure each is assigned to the desired zone.
- Keep the remote control away from strong electromagnetic interference sources to maintain stable control.
- Consider mounting the controller in an accessible but discreet location for easy wiring and maintenance.
8. Warranty and Support
This product is certified with CCC, ROHS, and CE standards, indicating compliance with relevant safety and environmental regulations. Specific warranty details are not provided in the product information. For support or further inquiries, please contact your retailer or the manufacturer.