Midea AHS20AB-PG, AHS20AB-PP, AHS20AC-PASY

Contents

Midea Bread Maker and Noodle Maker Bucket Instruction Manual

For Models: AHS20AB-PG, AHS20AB-PP, AHS20AC-PASY

1. Introduction

This manual provides essential information for the proper installation, use, and maintenance of your new Midea non-stick bread bucket or noodle bucket liner. This replacement part is designed to restore the functionality of your bread maker or noodle maker, ensuring optimal performance and longevity. Please read these instructions carefully before use.

2. Product Overview

The Midea replacement bucket is a non-stick liner designed for specific Midea bread and noodle maker models. It includes a durable non-stick coating to prevent dough from sticking during mixing and baking, and a robust construction for long-term use. A kneading paddle is typically included with the bucket for dough preparation.

Midea Bread Bucket with Kneading Paddle
Figure 1: Midea Bread Bucket with Kneading Paddle

3. Compatibility

This replacement bucket is specifically suitable for the following Midea models:

  • Midea Bread Bucket non-stick liner AHS20AB-PG
  • Midea Bread Bucket non-stick liner AHS20AB-PP
  • Midea Noodle Bucket AHS20AC-PASY

It is also compatible with other bread or noodle makers that match the exact dimensions provided in the specifications section. Always verify the dimensions of your original bucket against the specifications to ensure a proper fit.

4. Installation

  1. Preparation: Ensure your bread maker is unplugged and completely cooled down before attempting to replace any parts.
  2. Remove Old Bucket: Carefully lift the old bread bucket out of the bread maker's main compartment. If it's stuck, gently wiggle it to loosen.
  3. Inspect Drive Shaft: Check the drive shaft mechanism inside the bread maker for any debris or damage. Clean if necessary.
  4. Insert New Bucket: Align the bottom of the new bucket with the drive shaft in the bread maker. Gently push down and rotate slightly until the bucket is securely seated. It should fit snugly without excessive force.
  5. Install Kneading Paddle: Place the kneading paddle onto the shaft inside the new bucket. Ensure it clicks into place or sits firmly.
  6. Verify Fit: Once installed, try to gently rotate the bucket to ensure it is properly engaged with the drive mechanism.

5. Care and Maintenance

To ensure the longevity of your non-stick bucket and maintain its performance, follow these care instructions:

  • Initial Cleaning: Before first use, wash the bucket and kneading paddle with warm, soapy water. Rinse thoroughly and dry completely.
  • Hand Washing Recommended: Always hand wash the bucket and paddle with a soft sponge and mild dish soap. Avoid abrasive cleaners, scouring pads, or metal utensils, as these can damage the non-stick coating.
  • Avoid Metal Utensils: Use only plastic, silicone, or wooden utensils when working with dough inside the bucket to prevent scratching the non-stick surface.
  • Do Not Soak: Avoid prolonged soaking of the bucket, especially the bottom mechanism, as this can affect its seals and functionality.
  • Storage: Store the bucket in a dry place.

6. Troubleshooting

Bucket does not fit into the bread maker:
Double-check the compatibility with your specific bread maker model. Ensure the dimensions match your original bucket. Verify that there is no obstruction in the bread maker's compartment or on the bucket's base.
Dough sticks to the non-stick coating:
Ensure the bucket was properly cleaned and dried before use. Avoid using excessive oil or butter on the coating, as this can sometimes lead to residue buildup. If the coating is visibly damaged (scratched), its non-stick properties may be compromised.
Kneading paddle does not rotate:
Ensure the kneading paddle is correctly seated on the shaft inside the bucket. Check if the bucket is properly installed and engaged with the bread maker's drive mechanism. Inspect the drive shaft for any damage or debris.

7. Specifications

FeatureDetail
TypeBread Maker Parts (Non-stick Liner)
MaterialMetal with Non-stick Coating
Top Opening Dimensions14.3 cm x 14.3 cm (approx.)
Overall Height20.6 cm (approx.)
Bottom Mechanism Diameter6.2 cm (approx.)
Bottom Mechanism Height3.1 cm (approx.)
OriginMainland China
Bread bucket side view with dimensions: 14.3cm top width, 20.6cm height
Figure 2: Bread Bucket Side View with Dimensions
Bread bucket bottom mechanism with dimensions: 6.2cm diameter, 3.1cm height
Figure 3: Bread Bucket Bottom Mechanism Dimensions

8. Warranty and Support

For any questions regarding product defects, compatibility issues, or general inquiries, please contact the seller directly through the platform where the purchase was made. Keep your purchase records for reference.

9. Frequently Asked Questions (FAQ)

Q: Is the kneading paddle included?
A: Yes, the kneading paddle is typically included with the replacement bucket.
Q: Can I put this bucket in the dishwasher?
A: Hand washing is strongly recommended to preserve the non-stick coating and the integrity of the bucket's seals.
Q: How do I know if this bucket is compatible with my bread maker?
A: Please check the model numbers listed in the 'Compatibility' section (AHS20AB-PG, AHS20AB-PP, AHS20AC-PASY). Additionally, compare the dimensions provided in the 'Specifications' section with your original bucket.

10. User Tips

  • To prolong the life of the non-stick coating, always use soft, non-abrasive tools for cleaning and mixing.
  • Ensure the bucket is completely dry before placing it back into the bread maker to prevent moisture-related issues.
  • If you notice any sticking, a light coating of cooking oil or spray before adding ingredients can help, but generally, the non-stick surface should perform well without it.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.