K&F CONCEPT EOS-M4/3

Contents

K&F CONCEPT EOS-M4/3 Lens Adapter Instruction Manual

For Canon EOS EF/EFS Mount Lenses to Micro Four Thirds (M4/3) Cameras

1. Introduction

The K&F CONCEPT EOS-M4/3 Lens Adapter allows you to mount Canon EOS EF and EFS series lenses onto Micro Four Thirds (M4/3) mount camera bodies. This adapter is designed for manual operation, enabling photographers to utilize a wider range of lenses with their M4/3 cameras. It features a durable construction of copper and aluminum alloy, with an anti-reflection coating and CNC anti-slip texture design for reliable performance.

Compatible Camera Models:

  • Olympus PEN: E-P1, E-P2, E-P3, E-P5, E-PL1/s, E-PL2, E-PL3, E-PL5, E-PL6, E-PL7, E-PL8, E-PM1, E-PM2, PEN-F, Air A01
  • Olympus OM-D: E-M1/II/X, E-M5/II, E-M10/II/III
  • Panasonic Lumix DMC-G Series: G1, G2, G3, G5, G6, G7, G9, G10
  • Panasonic Lumix DMC-GF Series: GF1, GF2, GF3, GF5, GF6, GF7, GF9, G80/85, G90/G95
  • Panasonic Lumix DMC-GH Series: GH1, GH2, GH3, GH4, GH5/S
  • Panasonic Lumix DMC-GM Series: GM1, GM5
  • Panasonic Lumix DMC-GX Series: GX1, GX7, GX800/850, GX8, GX80/85, GX9
  • Other: Panasonic AG-AF100/104, Blackmagic Design Pocket Cinema Camera (Original & 4K), Z CAM E2 / E2C / E2-S6, Kodak Pixpro S-1, YI M1, Sharp 8k.

Note: This adapter is not compatible with Canon STM series lenses such as EF 50mm f/1.8 STM or EF 18-135 IS STM.

2. Setup Instructions

Follow these steps to correctly attach the lens adapter and your Canon EF/EFS lens to your Micro Four Thirds camera.

  1. Attach the Adapter to the Camera Body:
    Align the red dot on the adapter with the red dot on your camera's lens mount. Rotate the adapter clockwise until it clicks into place, indicating it is securely locked.
  2. Attach the Lens to the Adapter:
    Align the red dot on your Canon EF/EFS lens with the red dot on the K&F CONCEPT adapter. Rotate the lens clockwise until it clicks into place.

Visual Guide: Attaching the Lens Adapter

Video demonstrating the attachment of the K&F CONCEPT lens adapter to a camera body and then a Canon lens to the adapter.

Step-by-step images:

K&F CONCEPT lens adapter being attached to an Olympus camera body.
Adapter being attached to camera body.
Canon lens being attached to the K&F CONCEPT adapter.
Lens being attached to adapter.
Fully assembled K&F CONCEPT adapter and Canon lens on an Olympus camera.
Fully assembled adapter and lens on camera.

3. Operating Instructions

This lens adapter is a mechanical adapter and does not support electronic communication between the lens and the camera. Therefore, all operations related to focus and aperture must be performed manually.

  • Focusing: Adjust the focus manually using the focus ring on your lens. The adapter allows for infinity focus.
  • Aperture Control: Adjust the aperture manually using the aperture ring on your lens. If your lens does not have a manual aperture ring, the aperture will be fixed at its widest setting.
  • Exposure: Use your camera's manual (M) or aperture-priority (Av/A) mode to control exposure.
  • Stability for Heavy Lenses: When using heavy medium format lenses, it is recommended to use a telephoto bracket and a tripod to provide additional support and balance the weight, preventing strain on the camera's lens mount.

4. Maintenance

Proper care and maintenance will ensure the longevity and optimal performance of your K&F CONCEPT lens adapter.

  • Cleaning: Use a clean, dry microfiber cloth to wipe the exterior of the adapter. Avoid using harsh chemicals or abrasive materials. For the interior, use a blower brush to remove dust. Do not touch the optical surfaces (if any) directly.
  • Storage: Store the adapter in a dry, dust-free environment when not in use. Keep it away from extreme temperatures and humidity.
  • Handling: Always handle the adapter by its body, avoiding contact with the mounting surfaces.

5. Troubleshooting

  • Adapter not attaching to camera: Ensure the red dots on the adapter and camera mount are aligned, and rotate until a click is heard. Check for any obstructions or debris on the mounts.
  • Lens not attaching to adapter: Ensure the red dots on the lens and adapter are aligned, and rotate until a click is heard. Verify that the lens is a compatible Canon EF/EFS mount lens.
  • Cannot focus: This adapter supports manual focus only. Ensure your camera is set to manual focus mode and adjust the focus ring on your lens.
  • Aperture cannot be changed: This adapter does not transmit electronic signals. If your lens lacks a manual aperture ring, the aperture will be fixed at its widest setting.
  • Image quality issues: Ensure both the lens and camera sensor are clean. Verify that the lens is securely mounted and that focus is accurately achieved manually.
  • Incompatible Lenses: If using Canon STM series lenses (e.g., EF 50mm f/1.8 STM, EF 18-135 IS STM), they are not supported by this adapter.

6. Specifications

FeatureSpecification
BrandK&F CONCEPT
Model NumberEOS-M4/3
Lens Adapters TypeLens Adapters
Compatible BrandCanon (for EOS EF/EFS Mount Lenses)
Camera MountMicro 4/3 MFT mount
Focus TypeManual Focus
Video Auto FocusNo
MaterialCopper + Aluminum Alloy
Dimensions (L x W x H)10 cm x 10 cm x 8 cm
Weight0.17 kg
CertificationCE
OriginMainland China

7. User Tips

  • For best results, pair this adapter with mechanical or older lenses that feature a manual aperture ring, as electronic aperture control is not supported.
  • This adapter is a good value for its price, offering a reliable way to expand your lens options.
  • The adapter is designed for use with compatible Micro Four Thirds cameras, allowing for a wide range of photographic possibilities.

8. Warranty and Support

This K&F CONCEPT lens adapter comes with a 12-month quality guarantee. For any product-related inquiries, technical support, or warranty claims, please contact K&F CONCEPT customer service directly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.