1. Product Overview
The T&G TG619 MAX is a 20W portable Bluetooth speaker designed for outdoor and indoor use, featuring a fabric finish, waterproof design, and True Wireless Stereo (TWS) support for an immersive audio experience.
Package Contents
- T&G TG619 MAX Portable Bluetooth Speaker
- USB Charging Cable
- AUX Cable
- User Manual
2. Setup
Initial Charging
Before first use, fully charge the speaker using the provided USB charging cable. Connect the USB cable to the 'Charge USB PORT' on the speaker and a compatible USB power adapter (not included).
Power On/Off
- To Power On: Long press the power button (
) until the indicator light illuminates. - To Power Off: Long press the power button again.
Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth mode (indicated by a flashing blue light).
- On your mobile device, enable Bluetooth and search for available devices.
- Select "TG619 MAX" from the list to pair. A confirmation tone will sound upon successful connection.
True Wireless Stereo (TWS) Connection
The TWS feature allows you to connect two TG619 MAX speakers for a stereo sound experience.
- Turn on both TG619 MAX speakers simultaneously. Ensure neither speaker is currently connected to any Bluetooth device.
- On both speakers, long press the 'Play/Pause' button for approximately 4 seconds until you hear a hint voice. The button lights will stop flashing, indicating they are in TWS pairing mode.
- Once paired, one speaker will act as the master. Connect your mobile phone to this master speaker via Bluetooth.
3. Operating Instructions
Basic Controls
- Power Button: Long press for On/Off. Short press to switch between input modes (USB, TF Card, FM, Bluetooth, AUX Line-in).
- Play/Pause Button: Short press to play or pause music. In FM mode, short press to automatically search for stations; press again to stop searching.
- Volume Up (+): Short press for next song. Long press to increase volume.
- Volume Down (-): Short press for previous song. Long press to decrease volume.
Input Modes
The speaker supports multiple input sources:
- Bluetooth (BT): Wireless connection to your mobile device.
- FM Radio: Built-in FM tuner.
- TF Card: Insert a MicroSD card into the 'TF Card Port' for local music playback.
- USB Disk: Insert a USB flash drive into the 'USB Card Port' for local music playback.
- AUX Line-in: Connect external audio devices using the provided AUX cable to the 'AUX Port'.
Hands-free Calling
When connected to a mobile phone via Bluetooth:
- Answer Call: Short press the 'Play/Pause' button.
- End Call: Short press the 'Play/Pause' button again.
4. Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker's surface. Do not use abrasive cleaners or solvents.
- Water Resistance: The speaker is waterproof, but avoid submerging it in water for extended periods. Ensure the port cover is securely closed to maintain water resistance.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge it regularly, even if not in use.
5. Troubleshooting
- Speaker won't turn on: Ensure the battery is charged. Connect the speaker to a power source using the USB cable and try again.
- No sound: Check the volume level on both the speaker and your connected device. Ensure the correct input mode is selected. If using Bluetooth, re-pair the device.
- Bluetooth connection issues: Make sure the speaker is within the Bluetooth range (up to 10 meters). Disconnect and re-pair the speaker with your device. Try restarting both the speaker and your Bluetooth device.
- TWS pairing failed: Ensure both speakers are powered on and not connected to any other Bluetooth device before initiating TWS pairing. Follow the TWS connection steps carefully.
- Poor FM reception: Extend the AUX cable (if connected) as it can act as an antenna. Try moving the speaker to a different location.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | T&G |
| Model | TG619 MAX |
| Speaker Type | Portable, Outdoor Speaker |
| Output Power (PMPO) | 20W |
| Input Power (W) | <25 W |
| Channels | 2 (2.0) |
| Bluetooth Version | 5.0 |
| Bluetooth Range | 10M |
| Waterproof | Yes |
| Built-in Microphone | Yes |
| Support Memory Card | Yes (TF Card) |
| Communication | AUX, USB, Audio Line |
| Sound Mode | Immersive Sound Mode, Standard Mode |
| Sensitivity | 95dB |
| Power Source | Battery |
| Material | Plastic (Cabinet), Paper (Woofer/Tweeter) |
| Dimensions (L*W*H) | 74mm * 74mm * 196mm |
7. User Tips
- Optimal Sound: For the best audio experience, place the speaker on a stable surface and ensure there are no obstructions between the speaker and your listening position.
- TWS Placement: When using TWS, place the two speakers a few meters apart for a wider stereo soundstage.
- Port Protection: Always ensure the rubber flap covering the charging and input ports is securely closed when not in use, especially in wet environments, to maintain the speaker's waterproof rating.
- Battery Life: To maximize playtime, consider lowering the volume. High volume levels consume more battery power.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
