Tuya M515EGB

Contents

Tuya M515EGB Smart Electric Pull Bead Curtain Motor User Manual

Model: M515EGB | Brand: Tuya

1. Introduction

The Tuya M515EGB Intelligent Pull Bead Curtain Motor provides automated control for bead-chain roller blinds. This smart motor allows you to open or close your curtains conveniently via a mobile application, remote control (optional), or voice commands through compatible smart assistants like Alexa and Google Home. It is designed to simplify your daily routine and enhance your smart home experience.

2. Package Contents

Please check the package for the following items:

  • 1 x Tuya M515EGB Curtain Motor
  • 1 x USB WiFi Receiver
  • 1 x USB Cable
  • 1 x Remote Control (Optional, depending on purchased variant)
  • 1 x User Manual
  • 3 x Runner types (for various bead chain sizes)
  • 2 x Screws
  • 2 x Wall Plugs
  • 1 x 12V Adapter (for charging/powering the motor)
Tuya M515EGB Smart Curtain Motor and accessories
Figure 2.1: Product components including the motor, remote control, USB WiFi receiver, runners, screws, and USB cable.
Motor with various bead chain types
Figure 2.2: The motor is compatible with different bead chain types, including 2mm, 4mm, 6mm, 4.5*6mm, 4.5*12mm metal chain, beaded, and 3.2mm.

3. Specifications

FeatureSpecification
ModelM515EGB
MaterialABS
ColorWhite
Battery1 x Lithium battery, 2600mAh
Rated Torque0.45Nm
Rotating Speed30rpm
Operating Temperature-20℃ ~ +65℃
Wireless Frequency915MHz-2.4GHz
Ingress ProtectionIP20
OriginMainland China
CertificationNone
Package Dimensions300 x 210 x 55mm
Package Weight (with remote)667g
Package Weight (without remote)587g
Product introduction and technical parameters
Figure 3.1: Detailed product introduction and technical parameters.

4. Setup

4.1 Physical Installation

  1. Fix the Hanging Wall Plate: Position the hanging wall plate on the window frame or wall where the motor will be mounted. Mark the screw holes and secure the plate using the provided screws and wall plugs.
  2. Install the Motor: Slide the motor into the fixed wall panel until it clicks securely into place.
  3. Set the Curtain Bead Chain: Carefully insert the bead chain of your curtain into the appropriate runner on the motor. Ensure the chain is properly seated and moves freely.
  4. Cover the Runner Mask: Close the runner mask over the bead chain to secure it within the motor.
  5. Fine-tuning and Tightening: Gently pull the bead chain to ensure smooth operation. Adjust if necessary to prevent slippage or jamming.
Physical installation steps for the curtain motor
Figure 4.1: Visual guide for fixing the wall plate, installing the motor, and setting the bead chain.
Detailed installation steps for the curtain motor
Figure 4.2: Detailed diagram showing the product appearance, installation steps, and runner types.

4.2 App Pairing (Tuya Smart App)

To control the motor via the Tuya Smart App, follow these steps:

  1. Enter Pairing Mode: Click the [set key] on the motor. The red light will flash once. Press and hold the setting button until the red light lights up again. At this time, the red light of the motor will flash twice per second, indicating it's in pairing mode.
  2. Open Tuya App: Launch the Tuya Smart App on your mobile phone.
  3. Add Device: Click "Add Device" (or the '+' icon) in the app.
  4. Select Device Type: Navigate to "Small Appliances" and then select "WiFi curtain".
  5. Connect to WiFi: Enter the same 2.4 GHz WiFi network name and password that your mobile phone is connected to. Note: 5G WiFi is not supported.
  6. Confirm Flashing Indicator: Check the box "Confirm that the indicator light is flashing rapidly" and click "Next".
  7. Complete Pairing: The app will search for and add the device. Once "Added successfully" appears, click "finish".

4.3 Limit Setting

Setting the upper and lower limits ensures the curtain stops at the desired positions.

  1. Access Limit Settings: In the Tuya App, click "more" (usually represented by three dots or a '...' icon) and then select "limit setting".
  2. Set Upper Limit:
    • Click "upper limit setting". If there's an existing limit, you may need to click "delete upper limit" and confirm.
    • Click the "up button" in the app and wait for the motor to reach your desired upper limit.
    • Click "pause" when it reaches the desired position.
    • Click "upper limit setting" again to save the new upper limit.
  3. Set Lower Limit:
    • Click "lower limit setting". If there's an existing limit, you may need to click "delete lower limit" and confirm.
    • Click the "down button" in the app and wait for the motor to reach your desired lower limit.
    • Click "pause" when it reaches the desired position.
    • Click "lower limit setting" again to save the new lower limit.

4.4 Switching Motor Direction

If the motor operates in the opposite direction to your controls:

  1. Click the [set key] on the motor. The red light will flash once.
  2. Click the [down key] on the motor. The red light will flash once, indicating the direction has been switched.

4.5 Pairing Remote Control (if applicable)

  1. Click the [set key] on the motor. The red light will keep blinking.
  2. Immediately press any button (up, down, or stop) on the remote control. The red light on the motor will flash blue-quickly.
  3. At the same time, click the [set key] on the motor again, then press any button on the remote control (up, down, or stop) until the red light lights up again. The remote control is now paired.
App pairing, limit setting, motor direction, and remote pairing diagrams
Figure 4.3: Detailed diagrams for app pairing, limit setting, motor direction switching, and remote control pairing.

Video 4.1: Product unboxing, app pairing, limit setting, and installation demonstration.

5. Operating the Motor

The Tuya M515EGB motor offers multiple convenient ways to control your curtains:

5.1 Manual Control

The motor unit has physical buttons for basic operation:

  • Up Button: Moves the curtain upwards.
  • Down Button: Moves the curtain downwards.
  • Stop Button: Stops the curtain at its current position.

5.2 App Control (Tuya Smart App)

After successful pairing, use the Tuya Smart App on your smartphone to control the motor. The app provides a user-friendly interface to:

  • Open and close curtains.
  • Set precise curtain positions (e.g., 50% open).
  • Create schedules for automatic opening and closing at specific times.
  • Share device control with family members.

5.3 Remote Control (Optional)

If your package includes a remote control and it has been successfully paired, you can use its buttons to operate the curtains directly without needing the app or voice commands.

5.4 Voice Control

The Tuya M515EGB motor is compatible with popular smart voice assistants like Amazon Alexa and Google Home. Once integrated with your smart home system, you can use voice commands such as:

  • "Alexa, open the living room curtains."
  • "Hey Google, close the bedroom blinds."
  • "Alexa, set the curtains to 50%."
Control methods for the smart curtain motor
Figure 5.1: Illustration of manual, app, and remote control methods, along with voice control compatibility with Alexa and Google Home.

6. Maintenance

  • Cleaning: Wipe the motor and remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Battery Charging: The motor has a built-in 2600mAh lithium battery. Recharge it using the provided USB cable and 12V adapter when the battery is low. The external WiFi receiver helps save battery consumption.
  • Bead Chain Inspection: Periodically check the curtain's bead chain for any wear, damage, or obstructions that might affect the motor's operation.
  • Environmental Conditions: Ensure the motor is not exposed to extreme temperatures or high humidity, as this can affect its performance and lifespan.
Motor with built-in battery and external WiFi receiver
Figure 6.1: The motor features a built-in battery and an external WiFi receiver for optimized power usage.

7. Troubleshooting

ProblemPossible CauseSolution
Motor not responding to app/remote.Low battery, not paired, WiFi issue.Charge the motor. Re-pair the device with the app or remote. Check WiFi connection (ensure 2.4GHz).
Curtain moves in the wrong direction.Motor direction setting is incorrect.Follow instructions in Section 4.4 to switch motor direction.
Curtain does not stop at desired position.Limit settings are incorrect or not set.Follow instructions in Section 4.3 to set or adjust upper and lower limits.
Motor makes unusual noise or struggles.Bead chain obstructed or incorrect runner.Check the bead chain for any obstructions. Ensure the correct runner type is used for your chain.
Cannot connect to 5G WiFi.The device only supports 2.4GHz WiFi.Connect your phone and the motor to a 2.4GHz WiFi network.

8. User Tips

  • For optimal performance, ensure the bead chain is clean and free of debris.
  • Regularly check the battery level through the Tuya app to avoid unexpected power loss.
  • When setting limits, be precise to prevent the motor from over-extending or under-extending the curtains.
  • If using voice control, ensure your smart assistant is properly linked to your Tuya account and the device is named clearly.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's policies or contact the customer support provided at the point of purchase. Keep your purchase receipt as proof of purchase.

© 2023 Tuya. All rights reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.