1. Product Overview
The ACASIS USB C 3.2 SSD Enclosure (Model MAC3W) is a versatile external storage solution designed to convert proprietary Apple Flash SSDs (12+16 PIN) and standard M.2 NVMe SSDs into portable USB 3.2 storage devices. It offers high-speed data transmission and broad compatibility with various operating systems.


2. Package Contents
Please verify that all items are present in your package:
- 1 x ACASIS USB C 3.2 SSD Enclosure
- 1 x C to C & CF-AM Cable
- 1 x NVMe to Apple Mac SSD Adapter
- 1 x User Manual (this document)

3. Compatibility
This enclosure is designed for specific SSD types and Mac models:
- Supported SSDs: Apple original Mac SSDs with 12+16 Pins. Also supports M.2 NVMe SSDs when used with the included enclosure interface adapter.
- Supported Mac Models (2013-2017):
- 2013 MacBook Pro A1493 A1502 (MD864 MD865 MD293 MD294) SSD
- 2013 MacBook Pro retina A1398 A1502 (ME864 ME865 ME866 ME293 ME294) SSD
- 2013 MacBook Air A1465 A1466 (MD711 MD712 MD760 MD761) SSD
- 2014 MacBook Air A1465 A1466 (MD711 MD712 MD760 MD761) SSD
- 2014 MacBook Pro retina A1502 A1398 (MGX72 MGX82 MGX92 MGXA2 MGXC2) SSD
- 2015 MacBook Pro retina A1502 A1398 (MF839 MF840 MF841 MGXA2 MGXC2) SSD
- 2015 MacBook Air A1465 A1466 (MJVM2 MJVP2 MJVE2 MJVG2) and Mac Pro ME253 MD878 SSD
- 2016 MacBook Air A1465 A1466
- 2017 MacBook Air A1465 A1466
- Unsupported SSDs: Toshiba 12+16 PIN SSDs and SATA SSDs are NOT supported.


4. Setup and Installation
Follow these steps to install your SSD into the ACASIS enclosure:
- Step 1: Prepare the PCBA Board. Take out the PCBA board from the enclosure. Insert your hard disk (SSD) fully into the slot on the PCBA board and secure it by locking the tail screws.
- Step 2: Insert PCBA into Enclosure. Carefully slide the assembled PCBA board with the SSD back into the hard disk box (enclosure).
- Step 3: Secure the Enclosure. Install the baffle (end panel) and lock the screws to fully secure the enclosure.

5. Operating Instructions
The ACASIS SSD Enclosure is designed for plug-and-play operation across multiple systems.
5.1 Connecting to Your Device
Connect the enclosure to your computer using the provided USB C 3.2 cable. The enclosure supports hot-plugging, allowing you to connect or disconnect it without needing to restart your computer.
5.2 Data Transfer Speeds
The USB 3.2 Gen2 interface enables super-speed data transmission up to 10Gbps. For computers that support USB 3.2 Gen2x2, speeds can reach up to 20Gbps. Performance may vary depending on your computer, operating system, and the specific hard drive used.
5.3 System Compatibility
The enclosure is highly compatible with:
- Windows 7/8/10/11
- Mac OS 10.0 or later
- Linux 2.6 or later
No driver installation is required for these operating systems.
5.4 UASP Support
To ensure optimum performance and achieve the highest possible speeds, please make sure your computer's operating system supports UASP (USB Attached SCSI Protocol). Current operating systems that support UASP include Windows 8/10 and Mac OS 8/9 or above.

6. Maintenance
To ensure the longevity and optimal performance of your ACASIS SSD Enclosure, follow these maintenance guidelines:
- Heat Dissipation: The aluminum alloy shell is designed for good heat dissipation. Ensure the enclosure is placed in a well-ventilated area during prolonged use to prevent overheating.
- Cleaning: Use a soft, dry cloth to clean the exterior of the enclosure. Avoid using liquid cleaners or solvents.
- Storage: Store the enclosure in a cool, dry place away from direct sunlight and extreme temperatures.
- Physical Protection: While durable, avoid dropping or subjecting the enclosure to strong impacts, which could damage the internal components or the installed SSD.

7. Troubleshooting
If you encounter issues with your ACASIS SSD Enclosure, refer to the following common problems and solutions:
- SSD Not Recognized:
- Ensure the SSD is fully and correctly inserted into the PCBA board and secured with screws.
- Verify that the enclosure is properly connected to your computer via the USB cable. Try a different USB port or cable.
- Check if your SSD is compatible with the enclosure (refer to Section 3). Ensure it's not a Toshiba 12+16 PIN or SATA SSD.
- For new SSDs, it may need to be initialized and formatted in your computer's Disk Management (Windows) or Disk Utility (Mac) before it appears.
- Slow Data Transfer Speeds:
- Confirm your computer's USB port supports USB 3.2 Gen2 (10Gbps) or Gen2x2 (20Gbps) for maximum speed. Connecting to a USB 2.0 port will result in significantly lower speeds (480Mbps).
- Ensure your operating system supports UASP (USB Attached SCSI Protocol) for optimal performance.
- Check the condition of your USB cable; a damaged or low-quality cable can affect speeds.
- The performance of the SSD itself can impact transfer speeds.
- Enclosure Gets Warm:
- It is normal for the aluminum alloy enclosure to become warm during operation, especially during heavy data transfer, as it is designed to dissipate heat from the SSD. If it becomes excessively hot, ensure proper ventilation.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | MAC3W |
| External Interface | USB (USB C 3.2 Gen2/Gen2x2) |
| Size | 1.8" (Form Factor) |
| Case Material | Aluminum |
| Dimensions | 108 x 43 x 16 mm |
| Data Transfer Speed | Up to 10Gbps (USB 3.2 Gen2), Up to 20Gbps (USB 3.2 Gen2x2) |
| Supported Operating Systems | Windows 7/8/10/11, Mac OS 10.0 or later, Linux 2.6 or later |
| SSD Compatibility | Apple Flash SSDs (12+16 PIN) for MacBook Pro/Air/iMac/Mac mini (2013-2017), M.2 NVMe SSDs (with adapter) |
| Unsupported SSDs | Toshiba 12+16 PIN SSDs, SATA SSDs |
9. User Tips
- Data Backup: Always back up important data before performing any operations on your SSD, especially when installing it into a new enclosure or formatting.
- Safe Ejection: Always safely eject the external drive from your operating system before physically disconnecting the enclosure to prevent data corruption.
- Firmware Updates: Periodically check the ACASIS official website for any firmware updates for the enclosure, which may improve performance or compatibility.
- Cable Quality: Use the provided high-quality USB cable for optimal performance. Lower quality cables may not support the full data transfer speeds.
10. Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact the manufacturer or your point of purchase. Keep your proof of purchase for warranty claims.