E-ACE I18/I18P

Contents

E-ACE Car Rear View Camera User Manual

Model: I18/I18P

For use with compatible E-ACE DVR Dashcams

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your E-ACE Car Rear View Camera (Models I18/I18P). This camera is designed to enhance driving safety by providing a clear rear view, especially during reversing and parking maneuvers. It features 1080P resolution, a 140-degree wide-angle lens, starlight night vision, and a waterproof design. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product.

Important Notice:

  • This rear view camera is guaranteed to work 100% with specific E-ACE DVR models (A20P, A37, A37P, A38, A45, A45P, D13, D14, D15, D16, B11P, B36P).
  • Compatibility with other DVRs is not guaranteed due to variations in rear image sensors.

2. What's in the Box

Please check the contents of your package. If any items are missing or damaged, contact customer support.

  • E-ACE Car Rear View Camera (1080P, 4PIN, 2.5MM Jack)
  • Video Cable (6M or 10M, depending on selected variant)
E-ACE Rear Camera and Cable Components
Figure 2.1: E-ACE Rear Camera and Cable Components

3. Installation Guide

Proper installation is crucial for optimal performance. It is recommended to seek professional assistance for installation if you are unfamiliar with car electrical systems.

3.1 Camera Placement

The rear camera is typically mounted near the license plate or on the rear bumper of the vehicle. Ensure the camera has a clear, unobstructed view of the area behind your car.

Rear Camera Installation Diagram
Figure 3.1: Rear Camera Installation Diagram

3.2 Wiring Instructions

  1. Connect to Reverse Light: Locate your car's reverse lamp wiring. Connect the red cable wire of the rear camera to the positive (+) pole of your car's reverse lamp power. This connection allows the camera to receive power and trigger the DVR when the car is in reverse gear.
  2. Connect to DVR: Route the video cable from the rear camera to your E-ACE DVR Dashcam. Plug the 4PIN or 2.5MM Jack connector (depending on your camera model) into the corresponding rear camera input port on your DVR.
  3. Power the DVR: Plug the car charger into the vehicle's cigarette lighter socket to provide power to the DVR.

Warning:

Installation should be done in strict accordance with instructions to prevent recorder burn. It is recommended that a professional master performs the installation, especially for complicated wiring diagrams. This method is for reference only, as different car models may require specific installation procedures.

4. Operation

4.1 Automatic Reverse Parking Function

Once correctly installed and connected to a compatible E-ACE DVR, the camera will automatically activate when you shift your vehicle into reverse gear. The DVR screen will display the rear camera's image along with parking guidelines, assisting you in safe parking and reversing.

Automatic Reverse Parking Display
Figure 4.1: Automatic Reverse Parking Display with Guiding Lines

4.2 Starlight Night Vision

The camera is equipped with Starlight Night Vision technology. This feature enhances visibility in low-light conditions by filling in light, allowing for clear recordings and real-time viewing even in relatively dark environments.

Starlight Night Vision Feature
Figure 4.2: Starlight Night Vision in low-light conditions

5. Care and Maintenance

  • Cleaning the Lens: Regularly clean the camera lens with a soft, damp cloth to ensure a clear view. Avoid using abrasive cleaners that could scratch the lens.
  • Waterproof Design: The camera features a sealed, waterproof design to protect against dust, humidity, and aggressive gases. While designed for outdoor use, avoid directing high-pressure water jets directly at the camera for extended periods.
  • Cable Inspection: Periodically check the video cable for any signs of wear, damage, or loose connections. Secure any loose cables to prevent interference or disconnection.
Waterproof Camera Design
Figure 5.1: Waterproof Camera Design

6. Troubleshooting

ProblemPossible CauseSolution
No image on DVR when reversingIncorrect wiring to reverse light; Loose video cable connection; Incompatible DVR.Ensure the red wire is connected to the positive (+) pole of the reverse light. Check all cable connections. Verify DVR compatibility (refer to Section 1).
Image is blurry or unclearDirty lens; Condensation; Damaged lens.Clean the camera lens. Allow time for condensation to clear. If damaged, contact support for replacement.
Parking lines not displayedDVR settings; Camera model without guiding lines.Check your DVR's settings for parking line display options. Note that some camera models may not feature guiding lines. (This model does have guiding lines).
Poor night vision performanceExtremely dark environment; Dirty lens.Ensure the lens is clean. While it has starlight night vision, extreme darkness may still limit visibility.

7. Specifications

FeatureDetail
Brand NameE-ACE
Model NumberI18/I18P
Lens MaterialPlastic + Glass
Shell MaterialPlastic (ABS)
Wire or WirelessWire
Video Cable Length6M, 10M (variant dependent)
Connector Type2.5MM Jack, 4 PIN
Viewing Angle140°
Guiding LineYes
Resolution1080P
Special FeaturesStarlight Night Vision, Waterproof
CertificationsCE, FCC
Alarm TypeVehicle Backup Cameras, ACCESSORIES, Rear Side
E-ACE Certifications CE FCC
Figure 7.1: Product Certifications (CE, FCC)

8. User Tips

  • Check DVR Compatibility: Before purchasing or installing, always double-check that your E-ACE DVR model is listed as compatible (e.g., A20P, A37, A37P, A38, A45, A45P, D13, D14, D15, D16, B11P, B36P). This is a common point of confusion for users.
  • Professional Installation Recommended: While DIY installation is possible, consider professional installation, especially if you are not comfortable with automotive electrical systems. This can prevent potential damage to the camera or your vehicle's electrical system.
  • Test Before Finalizing: After initial wiring, test the camera's functionality by putting the car in reverse before securing all cables and panels. This ensures everything is working correctly.

9. Warranty and Support

9.1 Warranty Information

E-ACE offers a 365-day free replacement policy for this product. Please refer to the specific warranty terms and conditions provided at the time of purchase for full details.

9.2 Customer Support

For any technical assistance, troubleshooting, or warranty claims, please contact E-ACE customer support through the official E-ACE Official Store on AliExpress or your point of purchase. Provide your product model number and purchase details for faster service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.